ELECTROMAGNETISM, OPTICS, ACOUSTICS, HEAT TRANSFER, CLASSICAL MECHANICS, AND FLUID DYNAMICS |
Prev
Next
|
|
|
Improvement of 2.79-μm laser performance on laser diode side-pumped GYSGG/Er,Pr: GYSGG bonding rod with concave end-faces |
Xu-Yao Zhao(赵绪尧)1,2, Dun-Lu Sun(孙敦陆)1, Jian-Qiao Luo(罗建乔)1, Hui-Li Zhang(张会丽)1, Zhong-Qing Fang(方忠庆)1,2, Cong Quan(权聪)1,2, Lun-Zhen Hu(胡伦珍)1,2, Zhi-Yuan Han(韩志远)1,2, Mao-Jie Cheng(程毛杰)1, Shao-Tang Yin(殷绍唐)1 |
1 The Key Laboratory of Photonic Devices and Materials, Anhui Province, Anhui Institute of Optics and Fine Mechanics, Chinese Academy of Sciences, Hefei 230031, China; 2 University of Science and Technology of China, Hefei 230022, China |
|
|
Abstract A comparative study on the laser performance between bonding and non-bonding Er,Pr:GYSGG rods side-pumped by 970-nm laser diodes (LDs) is conducted for the thermal lensing compensation. The analyses of the thermal distribution and thermal focal length show that the bonding rod possesses a high cooling efficiency and weak thermal lensing effect compared with the conventional Er,Pr:GYSGG rod. Moreover, the laser characteristics of maximum output power, slope efficiency, and laser beam quality of the bonding rod with concave end-faces operated at 2.79 μm are improved under the high-repetition-rate operation. A maximum output power of 13.96 W is achieved at 150-Hz and 200-μs pulse width, corresponding to a slope efficiency of 17.7% and an electrical-to-optical efficiency of 12.9%. All results suggest that the combination of thermal bonding and concave end-face is a suitable structure for thermal lensing compensation.
|
Received: 27 June 2019
Revised: 28 September 2019
Accepted manuscript online:
|
PACS:
|
42.62.Fi
|
(Laser spectroscopy)
|
|
42.70.Hj
|
(Laser materials)
|
|
68.60.Dv
|
(Thermal stability; thermal effects)
|
|
81.65.Ps
|
(Polishing, grinding, surface finishing)
|
|
Fund: Project supported by the National Natural Science Foundation of China (Grant Nos. 51872290, 51702322, and 51802307) and the National Key Research and Development Program of China (Grant No. 2016YFB1102301). |
Corresponding Authors:
Dun-Lu Sun
E-mail: dlsun@aiofm.ac.cn
|
Cite this article:
Xu-Yao Zhao(赵绪尧), Dun-Lu Sun(孙敦陆), Jian-Qiao Luo(罗建乔), Hui-Li Zhang(张会丽), Zhong-Qing Fang(方忠庆), Cong Quan(权聪), Lun-Zhen Hu(胡伦珍), Zhi-Yuan Han(韩志远), Mao-Jie Cheng(程毛杰), Shao-Tang Yin(殷绍唐) Improvement of 2.79-μm laser performance on laser diode side-pumped GYSGG/Er,Pr: GYSGG bonding rod with concave end-faces 2019 Chin. Phys. B 28 114208
|
[1] |
Vodopyanov K L, Ganikhanov F, Maffetone J P, Zwieback I and Ruderman W 2000 Opt. Lett. 25 841
|
[2] |
Chen J K, Sun D L, Luo J Q, Xiao J Z Dou R Q and Zhang Q L 2013 Opt. Commun. 301-302 84
|
[3] |
Pollnau M and Jackson S D 2001 IEEE J. Quantum Electron. 7 30
|
[4] |
Chen J K, Sun D L, Luo J Q, Zhang H L, Dou R Q, Xiao J Z, Zhang Q L and Yin S T 2013 Opt. Express 21 23425
|
[5] |
Zhao X Y, Sun D L, Luo J Q, Zhang H L, Fang Z Q, Quan C, Li X L, Cheng M J, Zhang Q L and Yin S T 2017 Chin. Phys. B 26 074217
|
[6] |
Zhao X Y, Sun D L, Luo J Q, Zhang H L, Fang Z Q, Quan C, Hu L Z, Cheng M J, Zhang Q L and Yin S T 2018 Opt. Lett. 43 4312
|
[7] |
Neuenschwander B, Weber R and Weber H P 1995 IEEE J. Quantum Electron. 31 1082
|
[8] |
Hajiesmaeilbaigi F, Razzaghi H, Esfahani M M, Moghaddam M R A and Sabbaghzadeh J 2005 Laser Phys. Lett. 2 437
|
[9] |
Tsunekane M, Taguchi N and Inaba H 1998 Appl. Opt. 37 5713
|
[10] |
Wang J T, Cheng T Q, Wang L, Yang J W, Sun D L, Yin S T, Wu X Y and Jiang H H 2015 Laser Phys. Lett. 12 105004
|
[11] |
Weber R, Neuenschwander B, Weber H P 1999 Opt. Mater. 11 245
|
[12] |
Brown D C 1997 IEEE J. Quantun. Electron. 33 861
|
[13] |
Fang Z Q, Sun D L, Luo J Q, Zhang H L, Zhao X Y, Quan C, Hu L Z, Cheng M J, Zhang Q L and Yin S T 2017 Opt. Express 25 21349
|
[14] |
Koechner W 2005 Solid State Laser Engineering (Berlin:Springer) Chap. 7
|
[15] |
Degallaix J, Slagmolen B, Zhao C, Ju L and Blair D 2005 Gen. Relativ. Gravit. 37 1581
|
[16] |
Siengman A E 1993 Defining And Measuring Laser Beam Quality In Solid State Lasers (New York:Plenum) p. 13
|
No Suggested Reading articles found! |
|
|
Viewed |
|
|
|
Full text
|
|
|
|
|
Abstract
|
|
|
|
|
Cited |
|
|
|
|
Altmetric
|
blogs
Facebook pages
Wikipedia page
Google+ users
|
Online attention
Altmetric calculates a score based on the online attention an article receives. Each coloured thread in the circle represents a different type of online attention. The number in the centre is the Altmetric score. Social media and mainstream news media are the main sources that calculate the score. Reference managers such as Mendeley are also tracked but do not contribute to the score. Older articles often score higher because they have had more time to get noticed. To account for this, Altmetric has included the context data for other articles of a similar age.
View more on Altmetrics
|
|
|