INTERDISCIPLINARY PHYSICS AND RELATED AREAS OF SCIENCE AND TECHNOLOGY |
Prev
Next
|
|
|
Spray forming and mechanical properties of a new type powder metallurgy superalloy |
Jia Chong-Lin (贾崇林)a b, Ge Chang-Chun (葛昌纯)a, Xia Min (夏敏)a, Gu Tian-Fu (谷天赋)a |
a School of Materials Science and Engineering, University of Science and Technology Beijing, Beijing 100083, China; b Science and Technology on Advanced High Temperature Structural Materials Laboratory, Beijing Institute of Aeronautical Materials, Beijing 100095, China |
|
|
Abstract The deposited billet of a new type powder metallurgy (PM) superalloy FGH4095M for use in turbine disk manufacturing has been fabricated using spray forming technology. The metallurgical quality of the deposited billet was analyzed in terms of density, texture, and grain size. Comparative research was done on the microstructure and mechanical properties between the flat disk preform prepared with hot isostatic pressing (HIP) and the same alloy forgings prepared with HIP followed by isothermal forging (IF). The results show that the density of the spray-formed and nitrogen-atomized deposit billet is above 99% of the theoretical density, indicating a compact structure. The grains are uniform and fine. The billet has weak texture with a random distribution in the spray deposition direction and perpendicular to the direction of deposition. A part of atomizing nitrogen exists in the preform in the form of carbonitride. Nitrogen-induced microporosity causes the density reduction of the preform. Compared with the process of HIP+IF, the superalloy FGH4095M after HIP has better mechanical properties at both room temperature and high temperature. The sizes of the γ’ phase are finer in microstructure of the preform after HIP in comparison with the forgings after HIP+IF. This work shows that SF+HIP is a viable processing route for FGH4095M as a turbine-disk material.
|
Received: 05 June 2015
Revised: 05 August 2015
Accepted manuscript online:
|
PACS:
|
81.20.Ev
|
(Powder processing: powder metallurgy, compaction, sintering, mechanical alloying, and granulation)
|
|
83.50.Uv
|
(Material processing (extension, molding, etc.))
|
|
62.20.-x
|
(Mechanical properties of solids)
|
|
Fund: Project supported by the National Natural Science Foundation of China (Grant Nos. 50974016 and 50071014). |
Corresponding Authors:
Ge Chang-Chun
E-mail: ccge@mater.ustb.edu.cn
|
Cite this article:
Jia Chong-Lin (贾崇林), Ge Chang-Chun (葛昌纯), Xia Min (夏敏), Gu Tian-Fu (谷天赋) Spray forming and mechanical properties of a new type powder metallurgy superalloy 2015 Chin. Phys. B 24 118107
|
[1] |
Pollock T M and Tin S;2006 J. Propul. Power 22 361
|
[2] |
Qiu C L, Attallah M M and Wu X H;2013 Mater.Sci. Eng. A 564 176
|
[3] |
Gao Y, Stolken J S, Kumar M and Ritchie R O;2007 Acta Mater. 55 3155
|
[4] |
Zhang G Q, Li Z, Tian S F and Yan M G 2006 J. Aeron. Mater. 26 258 (in Chinese)
|
[5] |
Cui C S and Zhang J G;2012 Shanghai Met. 34 42
|
[6] |
Tian S F, Zhang G Q, Li Z and Yan M G;2003 J. Aeron. Mater. 23 233 (in Chinese)
|
[7] |
Wang Y, Li Z, Xu W Y, Yuan H and Liu N 2013 Mater. Sci. Forum 747 569
|
[8] |
Li Z, Zhang G Q and Tian S F 2002 Acta Metall. Sin. 38 1186 (in Chinese)
|
[9] |
Luo G M, Fan J F and Shan A D 2007 Mater. Rev. 21 52 (in Chinese)
|
[10] |
Mi J and Grant P S;2008 Acta Mater. 56 1588
|
[11] |
Mi J and Grant P S;2008 Acta Mater. 56 1597
|
[12] |
Kang F W, Sun J F, Zhang G Q, Li Z and Shen J 2007 Acta Metall. Sin. 43 1053 (in Chinese)
|
[13] |
Zhang Y, Zhang G Q, Li Z, Liu Na, Yuan H, Xu W Y, Gao Z J, Wang X P, Mi J and Grant P S 2011 J. Iron Steel Res. 23 29 (in Chinese)
|
[14] |
Guo B, Sun C S, Zhang S C and Ge C C;2013 Rare Met. 32 347
|
[15] |
Ning Y, Fu M W and Yao W;2012 Mater. Sci. Eng. A 539 101
|
[16] |
Zhang Y, Ge C C, Guo B and Shen W P 2012 Acta Phys. Sin. 61 218102 (in Chinese)
|
[17] |
Zhang Y, Ge C C, Shen W P and Qiu C J 2012 Acta Phys. Sin. 61 196101 (in Chinese)
|
[18] |
Zhang Y, Ge C C, Shen W P and Qiu C J 2012 Acta Phys. Sin. 61 208101 (in Chinese)
|
[19] |
Xu W Y, Zhang G Q and Li Z 2012 Adv. Mater. Res. 399 1937
|
[20] |
Mi J, Grant P S, Fritsching U and Belkessam O;2008 Mater. Sci. Eng. A 477 2
|
[21] |
Jia C L, Fan Q, Wang Y, Zhang Y Y and Li Q 2013 Mater. Sci. Forum 747 489
|
[22] |
Gu Y F, Lin D L and Chen J G 1998 Acta Metall. Sin. 34 351
|
[23] |
Mao W M 2002 Metal Materials with the Different Crystallographic Textures (Beijing: Science Press) p. 118 (in Chinese)
|
[24] |
Cai W and Lavernia E J 1998 Metall. Mater. Trans. B 29B 1097
|
[25] |
Liu H M, Rangel R H and Lavernia E J;1995 Mater. Sci. Eng. A 191 171
|
[26] |
Yu T, Xie H X and Wang C Y;2012 Chin. Phys. B 21 026104
|
[27] |
Qiu C L, Wu X H, Mei J F, Andrews P and Voice W;2013 J. Alloy. Comp. 578 454
|
[28] |
Wang K G, Li J R and Cao C X 2004 J. Mater. Eng. 31 3
|
[29] |
Du J P, Wang C Y and Yu T;2014 Chin. Phys. B 23 033401
|
[30] |
Xu Y, Huang P, Shu Q, Guo B and Shun C S;2013 Acta Metall. Sin. 49 1399
|
No Suggested Reading articles found! |
|
|
Viewed |
|
|
|
Full text
|
|
|
|
|
Abstract
|
|
|
|
|
Cited |
|
|
|
|
Altmetric
|
blogs
Facebook pages
Wikipedia page
Google+ users
|
Online attention
Altmetric calculates a score based on the online attention an article receives. Each coloured thread in the circle represents a different type of online attention. The number in the centre is the Altmetric score. Social media and mainstream news media are the main sources that calculate the score. Reference managers such as Mendeley are also tracked but do not contribute to the score. Older articles often score higher because they have had more time to get noticed. To account for this, Altmetric has included the context data for other articles of a similar age.
View more on Altmetrics
|
|
|