| CONDENSED MATTER: STRUCTURAL, MECHANICAL, AND THERMAL PROPERTIES |
Prev
Next
|
|
|
Study of metal-ceramic WC/Cu nano-wear behavior and strengthening mechanism |
| Min Zheng(郑敏)1, Jie Chen(陈杰)1, Zong-Xiao Zhu(朱宗孝)1,†, Ding-Feng Qu(曲定峰)1, Wei-Hua Chen(陈卫华)1, Zhuo Wu(吴卓)1, Lin-Jun Wang(王林军)1, and Xue-Zhong Ma(马学忠)2 |
1 School of Mechanical and Electrical Engineering, Lanzhou University of Technology, Lanzhou 730050, China;
2 School of Petroleum and Chemical Engineering, Lanzhou University of Technology, Lanzhou 730050, China |
|
|
|
|
Abstract In view of the inherent poor tribological properties of copper, the reinforcement of copper matrix composites with WC particles presents a promising research area with significant industrial influence. Therefore, in the present study, a molecular dynamics approach is used to simulate the process of repeated friction of diamond grinding balls on WC/Cu composites, and the friction force, friction coefficient, abrasion depth, wear rate, abrasion morphology, von-Mises stress, internal defects, workpiece energy, and performance comparison of different layer thicknesses are systematically investigated in the multiple friction process. It is found that the fluctuation amplitude of friction force, friction coefficient, and abrasion depth are smaller and the fluctuation frequency is larger during the initial friction, whereas near the WC phase, there appears extreme values of the above parameters and the von-Mises stress is highly concentrated while the workpiece energy contonues to increase. In the case of the repeated friction, with the increase of friction times, the friction force, friction coefficient, and abrasion depth fluctuation amplitude increase, the fluctuation frequency decreases, the workpiece energy reaches an extreme value near the WC phase, and a large number of dislocations plug, therefore, the region is strengthened. As the distance between the grinding ball and the WC phase decreases, the more obvious the strengthening effect, the stronger the ability of workpiece to resist the wear will be.
|
Received: 24 May 2022
Revised: 24 August 2022
Accepted manuscript online: 02 September 2022
|
|
PACS:
|
68.35.bd
|
(Metals and alloys)
|
| |
31.15.at
|
(Molecule transport characteristics; molecular dynamics; electronic structure of polymers)
|
| |
46.55.+d
|
(Tribology and mechanical contacts)
|
| |
81.05.Mh
|
(Cermets, ceramic and refractory composites)
|
|
| Fund: Project supported by the National Natural Science Foundation of China (Grant No. 52005236) and the Natural Science Foundation of Gansu Province, China (Grant No. 20JR5RA442). |
Corresponding Authors:
Zong-Xiao Zhu
E-mail: zhuzongxiaolut@163.com
|
Cite this article:
Min Zheng(郑敏), Jie Chen(陈杰), Zong-Xiao Zhu(朱宗孝), Ding-Feng Qu(曲定峰), Wei-Hua Chen(陈卫华), Zhuo Wu(吴卓), Lin-Jun Wang(王林军), and Xue-Zhong Ma(马学忠) Study of metal-ceramic WC/Cu nano-wear behavior and strengthening mechanism 2023 Chin. Phys. B 32 046801
|
[1] Zhai W Z, Bai L C, Zhou R H, Fan X L, Kang G Z, Liu Y and Zhou K 2021 Adv. Sci. 8 2003739
[2] Holmberg K and Erdemir A 2017 Friction 5 263
[3] Dang C, Liu H M, Feng S, Qu Y, Hu Q L and Jiang J C 2019 Mater. Res. Express 6 106312
[4] Wang C Z, Gan X P, Tao J M, Xie M, Yi J H and Liu Y C 2019 Nanotechnology 31 045701
[5] Xu X Z, Yi D, Wang Z C, Yu J C, Zhang Z H, Qiao R X, Sun Z H, Hu Z H, Gao P and Peng H L 2018 Adv. Mater. 30 1702944
[6] Arnaud C, Lecouturier F, Mesguich D, Ferreira N, Chevallier G, Estournés C, Weibel A and Laurent C 2016 Carbon 96 212
[7] Baig Z, Mamat O and Mustapha M 2018 Crit. Rev. Solid State Mater. Sci. 43 1
[8] Fan T X, Liu Y, Yang K M, Song J and Zhang D 2018 Acta Metall. Sin. 55 16
[9] Zheng M, Qu D F, Wei X C, Zhang Z, Zhu Z X, Wang L J and Chen W H 2022 Appl. Phys. A 128 1
[10] Tsakiris V, Enescu E, Radulian A, Lucaci M, Lungu M, Mocioi N, Leonat L, Cirstea D and Caramitu A 2016 International Symposium on Fundamentals of Electrical Engineering (ISFEE), 30 June-02 July Bucharest, Romania, p. 1-6
[11] Zhai H X and Huang Z 2004 Wear 257 414
[12] Aida H, Doi T, Takeda H, Katakura H, Kim S W, Koyama K, Yamazaki T and Uneda M 2012 Curr. Appl Phys. 12 S41
[13] Goel S, Kovalchenko A, Stukowski A and Cross G 2016 Acta Mater. 105 464
[14] Zhang L C and Tanaka H 1998 Tribol. Int. 31 425
[15] Shabani M, Paydar M H, Zamiri R, Goodarzi M and Moshksar M M 2016 J. Mater. Res. Technol. 5 5
[16] Wei K X, Zhou H R, Jia F L, Zhang K, Wei W, Chu F Q, Wang D D and Alexandrov I V 2021 Surf. Interfaces 24 101142
[17] Freschi M, Di Virgilio M, Zanardi G, Mariani M, Lecis N and Dotelli G 2021 Lubricants 9 53
[18] Li X H, Yan S J, Chen X, Hong Q H and Wang N 2020 J. Alloys Compd. 834 155182
[19] Chen L, Hou Z C, Liu Y F, Luan C, Zhu L and Li W Z 2020 Composites, Part A 138 106063
[20] Bahador A, Umeda J, Hamzah E, Yusof F, Li X C and Kondoh K 2020 Mater. Sci. Eng., A 772 138797
[21] Zhang C, Lu C, Pei L Q, Li J Q and Wang R 2020 Composites, Part B 182 107610
[22] Song H Y, Duan B B, Wang Y J, An M and Li Y L 2020 Mater. Chem. Phys. 253 123254
[23] Peng W X, Sun K, Abdullah R, Zhang M, Chen J and Shi J Q 2019 Appl. Surf. Sci. 487 22
[24] Feng Q, Song X Y, Xie H X, Wang H B, Liu X M and Yin F X 2017 Mater. Des. 120 193
[25] Zhu J D, Liu X, Zhou X D and Yang Q S 2021 Comput. Mater. Sci 188 110179
[26] Hosseini S V and Vahdati M 2012 Comput. Mater. Sci 65 29
[27] Xu F F, Fang F Z and Zhang X D 2018 Comput. Mater. Sci 143 133
[28] Zhu Z X, Peng B, Feng R C, Wang L J, Jiao S and Dong Y 2019 Sci. China Technol. Sci. 62 1916
[29] Li J, Fang Q H, Liu B and Liu Y W 2016 Appl. Surf. Sci. 384 419
[30] Swope W C, Andersen H C, Berens P H and Wilson K R 1982 J. Chem. Phys. 76 637
[31] Zhu Z X, Wang H, Qiang Z X, Jiao S, Wang L J, Zheng M, Zhu S Y, Cheng J and Yang J 2021 Coatings 11 896
[32] Fang Q H, Wang Q, Li J, Zeng X and Liu Y W 2017 RSC Adv. 7 42047
[33] Juslin N, Erhart P, Träskelin P, Nord J, Henriksson K O, Nordlund K, Salonen E and Albe K 2005 J. Appl. Phys. 98 123520
[34] Imran M, Hussain F, Rashid M and Ahmad S 2012 Chin. Phys. B 21 126802
[35] Yin Z H, Zhu P Z and Li B Z 2021 Tribol. Lett. 69 38
[36] Wei W, Chen L, Gong H R and Fan J L 2019 J. Phys.: Condens. Matter 31 305002
[37] Imran M, Hussain F, Rashid M and Ahmad S 2012 Chin. Phys. B 21 116201
[38] Zhang R, Kong L, Gong H and Liu B 2004 J. Phys.: Condens. Matter 16 5251
[39] Tersoff J 1989 Phys. Rev. B 39 5566
[40] Ye Y, Biswas R, Morris J, Bastawros A and Chandra A 2003 Nanotechnology 14 390
[41] Archard J 1953 J. Appl. Phys. 24 981
[42] Khosravi J, Givi M K B, Barmouz M and Rahi A 2014 Int. J. Adv. Manuf. Tech. 74 1087
[43] Doan D Q, Fang T H, Tran A S and Chen T H 2019 Comput. Mater. Sci 170 109162
[44] Stukowski A, Bulatov V V and Arsenlis A 2012 Modell. Simul. Mater. Sci. Eng. 20 085007
[45] Yin Z, Zhu P and Li B 2021 Tribol. Lett. 69 1
[46] Zhang Z B and Urbassek H M 2018 Comput. Mater. Sci 145 109
[47] Wang J P, Liang J W, Wen Z X, Yue Z F and Peng Y 2022 Mech. Mater. 104204 |
| No Suggested Reading articles found! |
|
|
Viewed |
|
|
|
Full text
|
|
|
|
|
Abstract
|
|
|
|
|
Cited |
|
|
|
|
Altmetric
|
|
blogs
Facebook pages
Wikipedia page
Google+ users
|
Online attention
Altmetric calculates a score based on the online attention an article receives. Each coloured thread in the circle represents a different type of online attention. The number in the centre is the Altmetric score. Social media and mainstream news media are the main sources that calculate the score. Reference managers such as Mendeley are also tracked but do not contribute to the score. Older articles often score higher because they have had more time to get noticed. To account for this, Altmetric has included the context data for other articles of a similar age.
View more on Altmetrics
|
|
|
