Virtual Special Topic — Magnetism and Magnetic Materials null
We present a study of magnetocaloric effect of the quasi-two-dimensional (2D) ferromagnet (CH3NH3)2CuCl4 in ab plane (easy-plane). From the measurements of magnetic field dependence of magnetization at various temperatures, we have discovered a large magnetic entropy change associated with the ferromagnetic-paramagnetic transition. The heat capacity measurements reveal an abnormal adiabatic change below the Curie temperature Tc~8.9 K, which is caused by the nature of quasi-2D layered crystal structure. These results suggest that perovskite organic-inorganic hybrids with a layered structure are suitable candidates as working substances in magnetic refrigeration technology.
Single-grain models with different cerium contents or structural parameters have been introduced to investigate the reversal magnetization behaviors in cerium-containing magnets. All the micromagnetic simulations are carried out via the object oriented micromagnetic framework (OOMMF). As for single (Nd,Ce)2Fe14B type grain, the coercivity decreases monotonously with the increase of the cerium content. Four types of grain structure have been compared:single (Nd,Ce)2Fe14B type, core ((Nd,Ce)2Fe14B)-shell (Nd2Fe14B) type with 2 nm thick shell, core (Ce2Fe14B)-shell (Nd2Fe14B) type, and core (Nd2Fe14B)-shell (Ce2Fe14B) type. It is found that core ((Nd,Ce)2Fe14B)-shell (Nd2Fe14B) type grain with 2 nm thick shell always presents the largest coercivity under the same total cerium content. Furthermore, the relationship between the coercivity and the shell thickness t in core ((Nd,Ce)2Fe14B)-shell (Nd2Fe14B) type grain has been studied. When the total cerium content is kept at 20.51 at.%, the analyzed results show that as t varies from 1 nm to 7 nm, the coercivity gradually ascends at the beginning, then quickly descends after reaching the maximum value when t=5 nm. From the perspective of the positions of nucleation points, the reasons why t affects the coercivity are discussed in detail.
The multiferroicity in the RMn2O5 family remains unclear, and less attention has been paid to its dependence on high-temperature (high-T) polarized configuration. Moreover, no consensus on the high-T space group symmetry has been reached so far. In view of this consideration, one may argue that the multiferroicity of RMn2O5 in the low-T range depends on the poling sequence starting far above the multiferroic ordering temperature. In this work, we investigate in detail the variation of magnetically induced electric polarization in GdMn2O5 and its dependence on electric field poling routine in the high-T range. It is revealed that the multiferroicity does exhibit qualitatively different behaviors if the high-T poling routine changes, indicating the close correlation with the possible high-T polarized state. These emergent phenomena may be qualitatively explained by the co-existence of two low-T polarization components, a scenario that was proposed earlier. One is the component associated with the Mn3+-Mn4+-Mn3+ exchange striction that seems to be tightly clamped by the high-T polarized state, and the other is the component associated with the Gd3+-Mn4+-Gd3+ exchange striction that is free of the clamping. The present findings may offer a different scheme for the electric control of the multiferroicity in RMn2O5.
We report a comprehensive Raman scattering study on layered MPS3 (M=Mn, Fe, Ni), a two-dimensional magnetic compound with weak van der Waals interlayer coupling. The observed Raman phonon modes have been well assigned by the combination of first-principles calculations and the polarization-resolved spectra. Careful symmetry analysis on the angle-dependent spectra demonstrates that the crystal symmetry is strictly described by C2h but can be simplified to D3d with good accuracy. Interestingly, the three compounds share exactly the same lattice structure but show distinct magnetic structures. This provides us with a unique opportunity to study the effect of different magnetic orders on lattice dynamics in MPS3. Our results reveal that the in-plane Néel antiferromagnetic (AF) order in MnPS3 favors a spin-phonon coupling compared to the in-plane zig-zag AF in NiPS3 and FePS3. We have discussed the mechanism in terms of the folding of magnetic Brillouin zones. Our results provide insights into the relation between lattice dynamics and magnetism in the layered MPX3 (M=transition metal, X=S, Se) family and shed light on the magnetism of monolayer MPX3 materials.
We report the detailed physical properties of quaternary compound Ba2BiFeS5 with the key structural ingredient of isolated FeS4 tetrahedra. Magnetization and heat capacity measurements clearly indicate that Ba2BiFeS5 has a paramagnetic to antiferromagnetic transition at about 30 K. The calculated magnetic entropy above ordering temperature is much smaller than theoretical value for high-spin Fe3+ ion with S=5/2, implying the possible short-range antiferromagnetic fluctuation in Ba2BiFeS5.
CrI3 in two-dimensional (2D) forms has been attracting much attention lately due to its novel magnetic properties at atomic large scale. The size and edge tuning of electronic and magnetic properties for 2D materials has been a promising way to broaden or even enhance their utility, as the case with nanoribbons/nanotubes in graphene, black phosphorus, and transition metal dichalcogenides. Here we studied the CrI3 nanoribbon (NR) and nanotube (NT) systematically to seek the possible size and edge control of the electronic and magnetic properties. We find that ferromagnetic ordering is stable in all the NR and NT structures of interest. An enhancement of the Curie temperature TC can be expected when the structure goes to NR or NT from its 2D counterpart. The energy difference between the FM and AFM states can be even improved by up to 3-4 times in a zigzag nanoribbon (ZZNR), largely because of the electronic instability arising from a large density of states of iodine-5p orbitals at EF. In NT structures, shrinking the tube size harvests an enhancement of spin moment by up to 4%, due to the reduced crystal-field gap and the re-balance between the spin majority and minority populations.
The spin transparency at the normal/ferromagnetic metal (NM/FM) interface was studied in Pt/YIG/Cu/FM multilayers. The spin current generated by the spin Hall effect (SHE) in Pt flows into Cu/FM due to magnetic insulator YIG blocking charge current and transmitting spin current via the magnon current. Therefore, the nonlocal voltage induced by an inverse spin Hall effect (ISHE) in FM can be detected. With the magnetization of FM parallel or antiparallel to the spin polarization of pure spin currents (σsc), the spin-independent nonlocal voltage is induced. This indicates that the spin transparency at the Cu/FM interface is spin-independent, which demonstrates that the influence of spin-dependent electrochemical potential due to spin accumulation on the interfacial spin transparency is negligible. Furthermore, a larger spin Hall angle of Fe20Ni80 (Py) than that of Ni is obtained from the nonlocal voltage measurements.
The magnetization-direction-dependent inverse spin Hall effect (ISHE) has been observed in NiFe film during spin Seebeck measurement in IrMn/NiFe/Cu/yttrium iron garnet (YIG) multilayer structure, where the YIG and NiFe layers act as the spin injector and spin current detector, respectively. By using the NiFe/IrMn exchange bias structure, the magnetization direction of YIG (MYIG) can be rotated with respect to that of NiFe (MNiFe) with a small magnetic field, thus allowing us to observe the magnetization-direction-dependent inverse spin Hall effect voltage in NiFe layer. Compared with the situation that polarization direction of spin current (σs) is perpendicular to MNiFe, the spin Seebeck voltage is about 30% larger than that when σs and MNiFe are parallel to each other. This phenomenon may originate from either or both of stronger interface or bulk scattering to spin current when σs and MNiFe are perpendicular to each other. Our work provides a way to control the voltage induced by ISHE in ferromagnets.
We report a strong antiferromagnetic (AFM) interlayer coupling in ferromagnetic La0.67Sr0.33MnO3/SrRuO3 (LSMO/SRO) superlattices grown on (111)-oriented SrTiO3 substrate. Unlike the (001) superlattices for which the spin alignment between LSMO and SRO is antiparallel in the in-plane direction and parallel in the out-of-plane direction, the antiparallel alignment is observed along both the in-plane and out-of-plane directions in the present sample. The low temperature hysteresis loop demonstrates two-step magnetic processes, indicating the coexistence of magnetically soft and hard components. Moreover, an inverted hysteresis loop was observed. Exchange bias tuned by the temperature and cooling field was also investigated, and positive as well as negative exchange bias was observed at the same temperature with the variation of the cooling field. A very large exchange field (HEB) was observed and both magnitude and sign of the HEB depend on the cooling field, which can be attributed to an interplay of Zeeman energy and AFM coupling energy at the interfaces. The present work shows the great potential of tuning a spin texture through interfacial engineering for the complex oxides whose spin state is jointly determined by strongly competing mechanisms.
We investigate the critical exponents and magnetocaloric effect of Co2-xZrSn polycrystal. The Co2-xZrSn undergoes a second-order ferromagnetism phase transition around the Curie temperature of Tc~280 K. The critical behavior in the vicinity of the magnetic phase transition has been investigated by using modified Arrott plot and Kouvel-Fisher methods. The obtained critical exponents, β, γ, and δ can be well described by the scaling theory. The determined exponents of Co2-xZrSn obey the mean-field model with a long-range magnetic interaction. In addition, the maximum magnetic entropy change -ΔSMmax of Co2-xZrSn is about 0.57 J·kg-1·K-1 and the relative cooling power (RCP) is 14.68 J·kg-1 at 50 kOe (1 Oe=79.5775 A·m-1).
The structural, magnetic properties, and electronic structures of hexagonal FeCoSn compounds with as-annealed bulk and ribbon states were investigated by x-ray powder diffraction (XRD), differential scanning calorimetry (DSC), transmission electron microscope (TEM), scanning electron microscope (SEM), magnetic measurements, and first-principles calculations. Results indicate that both states of FeCoSn show an Ni2In-type hexagonal structure with a small amount of FeCo-rich secondary phase. The Curie temperatures are located at 257 K and 229 K, respectively. The corresponding magnetizations are 2.57 μB/f.u. and 2.94 μB/f.u. at 5 K with a field of 50 kOe (1 Oe=79.5775 A·m-1). The orbital hybridizations between 3d elements are analyzed from the distribution of density of states (DOS), showing that Fe atoms carry the main magnetic moments and determine the electronic structure around Fermi level. A peak of DOS at Fermi level accounts for the presence of the FeCo-rich secondary phase. The Ni2In-type hexagonal FeCoSn compound can be used during the isostructural alloying for tuning phase transitions.