CONDENSED MATTER: ELECTRONIC STRUCTURE, ELECTRICAL, MAGNETIC, AND OPTICAL PROPERTIES |
Prev
Next
|
|
|
Induced current of high temperature superconducting loops by combination of exciting coil and thermal switch |
Jia-Wen Wang(王佳雯), Yin-Shun Wang(王银顺)†, Hua Chai(柴华), Ling-Feng Zhu(祝凌峰), and Wei Pi(皮伟) |
State Key Laboratory of New Energy Renewable Power System, North China Electric Power University, Beijing 102206, China |
|
|
Abstract With its commercialization, the second-generation (2G) high temperature superconducting (HTS) RE—Ba—Cu—O (REBCO, RE is rare earth) tape is extensively applied to the superconducting magnets in the high magnetic fields. However, unlike low temperature superconducting (LTS) magnets, the HTS magnet cannot operate in the persistent current mode (PCM) due to the immature superconducting soldering technique. In this paper, an exciting method for two HTS sub-loops, so-called charging and load loops, is proposed by flux pump consisting of exciting coil and controllable thermal switch. Two HTS sub-loops are made of an REBCO tape with two slits. An exciting coil with iron core is located in one sub-loop and is supplied with a triangular waveform current so that magnetic field is generated in another sub-loop. The influence of magnetic flux on induced current in load loop is presented and verified in experiment at 77 K. The relationship between the induced magnetic flux density and the current on the sub-loops having been calibrated, magnetic flux density, and induced current are obtained. The results show that the HTS sub-loops can be excited by a coil with thermal switch and the induced current increases with magnetic flux of exciting coil increasing, which is promising for persistent current operation mode of HTS magnets.
|
Received: 01 July 2021
Revised: 01 July 2021
Accepted manuscript online: 19 August 2021
|
PACS:
|
74.72.-h
|
(Cuprate superconductors)
|
|
74.78.-w
|
(Superconducting films and low-dimensional structures)
|
|
84.71.Mn
|
(Superconducting wires, fibers, and tapes)
|
|
85.25.Am
|
(Superconducting device characterization, design, and modeling)
|
|
Fund: Project supported by the National Natural Science Foundation of China (Grant No. 51977078). |
Corresponding Authors:
Yin-Shun Wang
E-mail: yswang@ncepu.edu.cn
|
Cite this article:
Jia-Wen Wang(王佳雯), Yin-Shun Wang(王银顺), Hua Chai(柴华), Ling-Feng Zhu(祝凌峰), and Wei Pi(皮伟) Induced current of high temperature superconducting loops by combination of exciting coil and thermal switch 2022 Chin. Phys. B 31 037402
|
[1] Cai C B, Chi C X, Li M J, Liu Z Y, Lu Y M, Guo Y Q, Bai C Y, Lu Q and Dou W Z 2019 Chin. Sci. Bull. 64 827 [2] Yan W H, Cai C B and Zhou D F 2019 Physics 48 733 (in Chinese) [3] Liu J H, Wang Q L, Qin L, Zhou B Z, Wang K S, Wang Y H, Wang L, Zhang Z L, Dai Y M, Liu H, Hu X N, Wang H, Cui C Y, Wang D G, Wang H, Sun J H, Sun W S and Xiong L 2020 Supercond. Sci. Technol. 33 03 [4] Weijers H W, Markiewicz W D, Gavrilin A V, Voran A J, Viouchkov Y L, Gundlach S R, Noyes P D, Abraimov D V, Bai H Y, Hannahs S T and Murphy T P 2016 IEEE Trans. Appl. Supercond. 26 4300807 [5] Wang Y S 2013 Fundamental Elements of Applied Superconductivity in Electrical Engineering (USA) (John Wiley & Sons Pte. Ltd.) [6] Maeda H and Yanagisawa Y 2014 IEEE Trans. Appl. Supercond. 24 4602412 [7] Noguchi S, Park D, Jiho L, Li Y, Michael P C and Iwasa Y 2019 IEEE Trans. Appl. Supercond. 29 4301005 [8] Yoshikawa M, Yonemura N, Yachida T, Imura T, Shirai Y and Yokoyama S 2016 IEEE Trans. Appl. Supercond. 26 4401105 [9] Welding. Micro joining of 2$nd generation high temperature superconductors (General requirements for the procedure, BS EN ISO 17279-1) (2018) [10] Lee H G, Kim J G, Lee S W, Kim W S, Lee S W, Choi K D, Hong G W and Ko T K 2006 Physica C 445-448 1099 [11] Yuan X, Wang Y S, Hu Y D, Chen H, Liu M C, Pi W and Cai C B 2018 IEEE Trans. Appl. Supercond. 29 4700405 [12] Yuan X, Wang Y S, Hou Y B, Kan C T and Sun M J 2018 IEEE Trans. Appl. Supercond. 28 4603005 [13] Sheng J, Zhang M, Wang Y W, Li X J, Patel J and Yuan W J 2017 Supercond. Sci. Technol. 30 094002 [14] Qiu D R, Wu W, Pan Y H, Xu S, Zhang Z M, Li Z L, Li Y, Wang Y W, Wang L B, Zhao Y, Zhang Z W, Yang P, Hong Z Y and Jin Z J 2017 IEEE Trans. Appl. Supercond. 27 4601605 [15] Qiu D R, Li Z Y, Wu W, Wang D C, Li X F, Hong Z Y, Ryu K and Jin Z J 2018 IEEE Trans. Appl. Supercond. 28 4601305 [16] Levin G A, Barnes P N, Murphy J, Brunke L and Long J D 2008 Appl. Phys. Lett. 93 062504 [17] Cruz V, Telles G T, Santos B, Ferreira A C and Junior R 2020 IEEE Trans. Appl. Supercond. 30 8200306 [18] Ali M Z, Zheng J X, Huber F, Zhang Z W, Yuan W J and Zhang M 2020 Supercond. Sci. Technol. 33 ab794a [19] Xia J, Bai H Y, Lu J, Andrew V G, Zhou Y H and Weijers H W 2015 Supercond. Sci. Technol. 28 125004 [20] Brambilla R, Grilli F and Martini L 2007 Supercond. Sci. Technol. 20 16 [21] Rostila L, Soderlund L, Mikkonen R and Lehtonen J 2007 Physica C 467 91 |
No Suggested Reading articles found! |
|
|
Viewed |
|
|
|
Full text
|
|
|
|
|
Abstract
|
|
|
|
|
Cited |
|
|
|
|
Altmetric
|
blogs
Facebook pages
Wikipedia page
Google+ users
|
Online attention
Altmetric calculates a score based on the online attention an article receives. Each coloured thread in the circle represents a different type of online attention. The number in the centre is the Altmetric score. Social media and mainstream news media are the main sources that calculate the score. Reference managers such as Mendeley are also tracked but do not contribute to the score. Older articles often score higher because they have had more time to get noticed. To account for this, Altmetric has included the context data for other articles of a similar age.
View more on Altmetrics
|
|
|