Home
|
About CPB
|
Announcement
|
CPS journals
Article lookup
导航切换
Chinese Physics B
Highlights
Special topics
In press
Authors
Submit an article
Manuscript tracking
Call for papers
Scope
Instruction for authors
Copyright agreement
Templates
PACS
Flow chart
Author FAQs
Referees
Review policy
Referee login
Referee FAQs
Editor in chief login
Editor login
Office login
SPECIAL TOPIC — Heat conduction and its related interdisciplinary areas
Default
Latest
Most Read
Please wait a minute...
For selected:
Download citations
EndNote
Ris
BibTeX
Toggle thumbnails
Select
Theoretical study on the effective thermal conductivity of silica aerogels based on a cross-aligned and cubic pore model
Kuncan Zheng(郑坤灿), Zhendong Li(李震东), Yutong Cao(曹豫通), Ben Liu(刘犇)), and Junlei Hu(胡君磊)
Chin. Phys. B, 2024, 33 (
6
): 064401. DOI:
10.1088/1674-1056/ad47ac
Abstract
(
62
)
HTML
(
1
)
PDF
(1786KB)(
51
)
Knowledge map
Aerogel nanoporous materials possess high porosity, high specific surface area, and extremely low density due to their unique nanoscale network structure. Moreover, their effective thermal conductivity is very low, making them a new type of lightweight and highly efficient nanoscale super-insulating material. However, prediction of their effective thermal conductivity is challenging due to their uneven pore size distribution. To investigate the internal heat transfer mechanism of aerogel nanoporous materials, this study constructed a cross-aligned and cubic pore model (CACPM) based on the actual pore arrangement of SiO$_{2}$ aerogel. Based on the established CACPM, the effective thermal conductivity expression for the aerogel was derived by simultaneously considering gas-phase heat conduction, solid-phase heat conduction, and radiative heat transfer. The derived expression was then compared with available experimental data and the Wei structure model. The results indicate that, according to the model established in this study for the derived thermal conductivity formula of silica aerogel, for powdery silica aerogel under the conditions of $T=298$K, $a_{2} =0.85$, $D_{1} =90μ $m, $\rho =128{\rm kg/m}^{3}$, within the pressure range of 0-10$^{5}$Pa, the average deviation between the calculated values and experimental values is 10.51%. In the pressure range of 10$^{3}$-10$^{4}$Pa, the deviation between calculated values and experimental values is within 4%. Under these conditions, the model has certain reference value in engineering verification. This study also makes a certain contribution to the research of aerogel thermal conductivity heat transfer models and calculation formulae.
Select
High-entropy alloys in thermoelectric application: A selective review
Kai Ren(任凯), Wenyi Huo(霍文燚), Shuai Chen(陈帅), Yuan Cheng(程渊), Biao Wang(王彪), and Gang Zhang(张刚)
Chin. Phys. B, 2024, 33 (
5
): 057202. DOI:
10.1088/1674-1056/ad34c5
Abstract
(
94
)
HTML
(
6
)
PDF
(1047KB)(
103
)
Knowledge map
Since the superior mechanical, chemical and physical properties of high-entropy alloys (HEAs) were discovered, they have gradually become new emerging candidates for renewable energy applications. This review presents the novel applications of HEAs in thermoelectric energy conversion. Firstly, the basic concepts and structural properties of HEAs are introduced. Then, we discuss a number of promising thermoelectric materials based on HEAs. Finally, the conclusion and outlook are presented. This article presents an advanced understanding of the thermoelectric properties of HEAs, which provides new opportunities for promoting their applications in renewable energy.
Select
Thermal management by manipulating electromagnetic parameters
Yun Wang(王云), Di-Fei Liang(梁迪飞), Tian-Cheng Han(韩天成), and Long-Jiang Deng(邓龙江)
Chin. Phys. B, 2024, 33 (
5
): 058403. DOI:
10.1088/1674-1056/ad34c6
Abstract
(
73
)
HTML
(
9
)
PDF
(1270KB)(
47
)
Knowledge map
Electromagnetic absorbing materials may convert electromagnetic energy into heat energy and dissipate it. However, in a high-power electromagnetic radiation environment, the temperature of the absorbing material rises significantly and even burns. It becomes critical to ensure electromagnetic absorption performance while minimizing temperature rise. Here, we systematically study the coupling mechanism between the electromagnetic field and the temperature field when the absorbing material is irradiated by electromagnetic waves. We find out the influence of the constitutive parameters of the absorbing materials (including uniform and non-uniform) on the temperature distribution. Finally, through a smart design, we achieve better absorption and lower temperature simultaneously. The accuracy of the model is affirmed as simulation results aligned with theoretical analysis. This work provides a new avenue to control the temperature distribution of absorbing materials.
Select
Dynamic response of a thermal transistor to time-varying signals
Qinli Ruan(阮琴丽), Wenjun Liu(刘文君), and Lei Wang(王雷)
Chin. Phys. B, 2024, 33 (
5
): 056301. DOI:
10.1088/1674-1056/ad2dcc
Abstract
(
68
)
HTML
(
3
)
PDF
(805KB)(
46
)
Knowledge map
Thermal transistor, the thermal analog of an electronic transistor, is one of the most important thermal devices for microscopic-scale heat manipulating. It is a three-terminal device, and the heat current flowing through two terminals can be largely controlled by the temperature of the third one. Dynamic response plays an important role in the application of electric devices and also thermal devices, which represents the devices' ability to treat fast varying inputs. In this paper, we systematically study two typical dynamic responses of a thermal transistor, i.e., the response to a step-function input (a switching process) and the response to a square-wave input. The role of the length $L$ of the control segment is carefully studied. It is revealed that when $L$ is increased, the performance of the thermal transistor worsens badly. Both the relaxation time for the former process and the cutoff frequency for the latter one follow the power-law dependence on $L$ quite well, which agrees with our analytical expectation. However, the detailed power exponents deviate from the expected values noticeably. This implies the violation of the conventional assumptions that we adopt.
Select
Near-field radiative heat transfer between nanoporous GaN films
Xiaozheng Han(韩晓政), Jihong Zhang(张纪红), Haotuo Liu(刘皓佗), Xiaohu Wu(吴小虎), and Huiwen Leng(冷惠文)
Chin. Phys. B, 2024, 33 (
4
): 047801. DOI:
10.1088/1674-1056/ad09a9
Abstract
(
78
)
HTML
(
4
)
PDF
(2672KB)(
85
)
Knowledge map
Photon tunneling effects give rise to surface waves, amplifying radiative heat transfer in the near-field regime. Recent research has highlighted that the introduction of nanopores into materials creates additional pathways for heat transfer, leading to a substantial enhancement of near-field radiative heat transfer (NFRHT). Being a direct bandgap semiconductor, GaN has high thermal conductivity and stable resistance at high temperatures, and holds significant potential for applications in optoelectronic devices. Indeed, study of NFRHT between nanoporous GaN films is currently lacking, hence the physical mechanism for adding nanopores to GaN films remains to be discussed in the field of NFRHT. In this work, we delve into the NFRHT of GaN nanoporous films in terms of gap distance, GaN film thickness and the vacuum filling ratio. The results demonstrate a 27.2% increase in heat flux for a 10 nm gap when the nanoporous filling ratio is 0.5. Moreover, the spectral heat flux exhibits redshift with increase in the vacuum filling ratio. To be more precise, the peak of spectral heat flux moves from
ω
= 1.31×10
14
rad·s
-1
to
ω
= 1.23×10
14
rad·s
-1
when the vacuum filling ratio changes from
f
= 0.1 to
f
= 0.5; this can be attributed to the excitation of surface phonon polaritons. The introduction of graphene into these configurations can highly enhance the NFRHT, and the spectral heat flux exhibits a blueshift with increase in the vacuum filling ratio, which can be explained by the excitation of surface plasmon polaritons. These findings offer theoretical insights that can guide the extensive utilization of porous structures in thermal control, management and thermal modulation.
Select
Thermal conductivity of GeTe crystals based on machine learning potentials
Jian Zhang(张健), Hao-Chun Zhang(张昊春), Weifeng Li(李伟峰), and Gang Zhang(张刚)
Chin. Phys. B, 2024, 33 (
4
): 047402. DOI:
10.1088/1674-1056/ad1b42
Abstract
(
100
)
HTML
(
3
)
PDF
(4624KB)(
101
)
Knowledge map
GeTe has attracted extensive research interest for thermoelectric applications. In this paper, we first train a neuro-evolution potential (NEP) based on a dataset constructed by
ab initio
molecular dynamics, with the Gaussian approximation potential (GAP) as a reference. The phonon density of states is then calculated by two machine learning potentials and compared with density functional theory results, with the GAP potential having higher accuracy. Next, the thermal conductivity of a GeTe crystal at 300 K is calculated by the equilibrium molecular dynamics method using both machine learning potentials, and both of them are in good agreement with the experimental results; however, the calculation speed when using the NEP potential is about 500 times faster than when using the GAP potential. Finally, the lattice thermal conductivity in the range of 300 K—600 K is calculated using the NEP potential. The lattice thermal conductivity decreases as the temperature increases due to the phonon anharmonic effect. This study provides a theoretical tool for the study of the thermal conductivity of GeTe.
Select
Diameter-dependent ultra-high thermoelectric performance of ZnO nanowires
Yinan Nie(聂祎楠), Guihua Tang(唐桂华), Yifei Li(李一斐), Min Zhang(张敏), and Xin Zhao(赵欣)
Chin. Phys. B, 2024, 33 (
4
): 047301. DOI:
10.1088/1674-1056/ad11e5
Abstract
(
80
)
HTML
(
3
)
PDF
(1240KB)(
67
)
Knowledge map
Zinc oxide (ZnO) shows great potential in electronics, but its large intrinsic thermal conductivity limits its thermoelectric applications. In this work, we explore the significant carrier transport capacity and diameter-dependent thermoelectric characteristics of wurtzite-ZnO<0001> nanowires based on first-principles and molecular dynamics simulations. Under the synergistic effect of band degeneracy and weak phonon—electron scattering, P-type (ZnO)
73
nanowires achieve an ultra-high power factor above 1500 μW· cm
-1
· K
-2
over a wide temperature range. The lattice thermal conductivity and carrier transport properties of ZnO nanowires exhibit a strong diameter size dependence. When the ZnO nanowire diameter exceeds 12.72 Å, the carrier transport properties increase significantly, while the thermal conductivity shows a slight increase with the diameter size, resulting in a
ZT
value of up to 6.4 at 700 K for P-type (ZnO)
73
. For the first time, the size effect is also illustrated by introducing two geometrical configurations of the ZnO nanowires. This work theoretically depicts the size optimization strategy for the thermoelectric conversion of ZnO nanowires.
Select
Wide frequency phonons manipulation in Si nanowire by introducing nanopillars and nanoparticles
Yatao Li(李亚涛), Yingguang Liu(刘英光), Xin Li(李鑫), Hengxuan Li(李亨宣), Zhixiang Wang(王志香), and Jiuyi Zhang(张久意)
Chin. Phys. B, 2024, 33 (
4
): 046502. DOI:
10.1088/1674-1056/ad0290
Abstract
(
92
)
HTML
(
3
)
PDF
(1232KB)(
69
)
Knowledge map
The combination of different nanostructures can hinder phonons transmission in a wide frequency range and further reduce the thermal conductivity (TC). This will benefit the improvement and application of thermoelectric conversion, insulating materials and thermal barrier coatings, etc. In this work, the effects of nanopillars and Ge nanoparticles (GNPs) on the thermal transport of Si nanowire (SN) are investigated by nonequilibrium molecular dynamics (NEMD) simulation. By analyzing phonons transport behaviors, it is confirmed that the introduction of nanopillars leads to the occurrence of low-frequency phonons resonance, and nanoparticles enhance high-frequency phonons interface scattering and localization. The results show that phonons transport in the whole frequency range can be strongly hindered by the simultaneous introduction of nanopillars and nanoparticles. In addition, the effects of system length, temperature, sizes and numbers of nanoparticles on the TC are investigated. Our work provides useful insights into the effective regulation of the TC of nanomaterials.
Select
Phonon transport properties of Janus Pb
2
X
As(
X
= P, Sb, and Bi) monolayers: A DFT study
Jiaxin Geng(耿嘉鑫), Pei Zhang(张培), Zhunyun Tang(汤准韵), and Tao Ouyang(欧阳滔)
Chin. Phys. B, 2024, 33 (
4
): 046501. DOI:
10.1088/1674-1056/ad2260
Abstract
(
111
)
HTML
(
2
)
PDF
(2730KB)(
143
)
Knowledge map
Grasping the underlying mechanisms behind the low lattice thermal conductivity of materials is essential for the efficient design and development of high-performance thermoelectric materials and thermal barrier coating materials. In this paper, we present a first-principles calculations of the phonon transport properties of Janus Pb
2
PAs and Pb
2
SbAs monolayers. Both materials possess low lattice thermal conductivity, at least two orders of magnitude lower than graphene and h-BN. The room temperature thermal conductivity of Pb
2
SbAs (0.91 W/mK) is only a quarter of that of Pb
2
PAs (3.88 W/mK). We analyze in depth the bonding, lattice dynamics, and phonon mode level information of these materials. Ultimately, it is determined that the synergistic effect of low group velocity due to weak bonding and strong phonon anharmonicity is the fundamental cause of the intrinsic low thermal conductivity in these Janus structures. Relative regular residual analysis further indicates that the four-phonon processes are limited in Pb
2
PAs and Pb
2
SbAs, and the three-phonon scattering is sufficient to describe their anharmonicity. In this study, the thermal transport properties of Janus Pb
2
PAs and Pb
2
SbAs monolayers are illuminated based on fundamental physical mechanisms, and the low lattice thermal conductivity endows them with the potential applications in the field of thermal barriers and thermoelectrics.
Select
Controlled thermally-driven mass transport in carbon nanotubes using carbon hoops
Yaolong Li(李耀隆), Songyuan Li(李松远), Meifen Wang(王美芬), and Renliang Zhang(张任良)
Chin. Phys. B, 2024, 33 (
4
): 046101. DOI:
10.1088/1674-1056/ad14ff
Abstract
(
65
)
HTML
(
7
)
PDF
(744KB)(
46
)
Knowledge map
Controlling mass transportation using intrinsic mechanisms is a challenging topic in nanotechnology. Herein, we employ molecular dynamics simulations to investigate the mass transport inside carbon nanotubes (CNT) with temperature gradients, specifically the effects of adding a static carbon hoop to the outside of a CNT on the transport of a nanomotor inside the CNT. We reveal that the underlying mechanism is the uneven potential energy created by the hoops, i.e., the hoop outside the CNT forms potential energy barriers or wells that affect mass transport inside the CNT. This fundamental control of directional mass transportation may lead to promising routes for nanoscale actuation and energy conversion.
Select
Influence of substrate effect on near-field radiative modulator based on biaxial hyperbolic materials
Ruiyi Liu(刘睿一), Haotuo Liu(刘皓佗), Yang Hu(胡杨), Zheng Cui(崔峥), and Xiaohu Wu(吴小虎)
Chin. Phys. B, 2024, 33 (
4
): 044403. DOI:
10.1088/1674-1056/ad2a6c
Abstract
(
80
)
HTML
(
2
)
PDF
(1652KB)(
52
)
Knowledge map
Relative rotation between the emitter and receiver could effectively modulate the near-field radiative heat transfer (NFRHT) in anisotropic media. Due to the strong in-plane anisotropy, natural hyperbolic materials can be used to construct near-field radiative modulators with excellent modulation effects. However, in practical applications, natural hyperbolic materials need to be deposited on the substrate, and the influence of substrate on modulation effect has not been studied yet. In this work, we investigate the influence of substrate effect on near-field radiative modulator based on
α
-MoO
3
. The results show that compared to the situation without a substrate, the presence of both lossless and lossy substrate will reduce the modulation contrast (MC) for different film thicknesses. When the real or imaginary component of the substrate permittivity increases, the mismatch of hyperbolic phonon polaritons (HPPs) weakens, resulting in a reduction in MC. By reducing the real and imaginary components of substrate permittivity, the MC can be significantly improved, reaching 4.64 for
ε
s
= 3 at
t
= 10 nm. This work indicates that choosing a substrate with a smaller permittivity helps to achieve a better modulation effect, and provides guidance for the application of natural hyperbolic materials in the near-field radiative modulator.
Select
General three-dimensional thermal illusion metamaterials
Tianfeng Liu(刘天丰), Zhaochen Wang(王兆宸), Zhan Zhu(朱展), and Run Hu(胡润)
Chin. Phys. B, 2024, 33 (
4
): 044401. DOI:
10.1088/1674-1056/ad09aa
Abstract
(
75
)
HTML
(
3
)
PDF
(965KB)(
74
)
Knowledge map
Thermal illusion aims to create fake thermal signals or hide the thermal target from the background thermal field to mislead infrared observers, and illusion thermotics was proposed to regulate heat flux with artificially structured metamaterials for thermal illusion. Most theoretical and experimental works on illusion thermotics focus on two-dimensional materials, while heat transfer in real three-dimensional (3D) objects remains elusive, so the general 3D illusion thermotics is urgently demanded. In this study, we propose a general method to design 3D thermal illusion metamaterials with varying illusions at different sizes and positions. To validate the generality of the 3D method for thermal illusion metamaterials, we realize thermal functionalities of thermal shifting, splitting, trapping, amplifying and compressing. In addition, we propose a special way to simplify the design method under the condition that the size of illusion target is equal to the size of original heat source. The 3D thermal illusion metamaterial paves a general way for illusion thermotics and triggers the exploration of illusion metamaterials for more functionalities and applications.
Select
Phonon resonance modulation in weak van der Waals heterostructures: Controlling thermal transport in graphene—silicon nanoparticle systems
Yi Li(李毅), Yinong Liu(刘一浓), and Shiqian Hu(胡世谦)
Chin. Phys. B, 2024, 33 (
4
): 047401. DOI:
10.1088/1674-1056/ad1501
Abstract
(
97
)
HTML
(
3
)
PDF
(4216KB)(
66
)
Knowledge map
The drive for efficient thermal management has intensified with the miniaturization of electronic devices. This study explores the modulation of phonon transport within graphene by introducing silicon nanoparticles influenced by van der Waals forces. Our approach involves the application of non-equilibrium molecular dynamics to assess thermal conductivity while varying the interaction strength, leading to a noteworthy reduction in thermal conductivity. Furthermore, we observe a distinct attenuation in length-dependent behavior within the graphene—nanoparticles system. Our exploration combines wave packet simulations with phonon transmission calculations, aligning with a comprehensive analysis of the phonon transport regime to unveil the underlying physical mechanisms at play. Lastly, we conduct transient molecular dynamics simulations to investigate interfacial thermal conductance between the nanoparticles and the graphene, revealing an enhanced thermal boundary conductance. This research not only contributes to our understanding of phonon transport but also opens a new degree of freedom for utilizing van der Waals nanoparticle-induced resonance, offering promising avenues for the modulation of thermal properties in advanced materials and enhancing their performance in various technological applications.
Select
Thermal transport in composition graded silicene/germanene heterostructures
Zengqiang Cao(曹增强), Chaoyu Wang(王超宇), Honggang Zhang(张宏岗), Bo You(游波), and Yuxiang Ni(倪宇翔)
Chin. Phys. B, 2024, 33 (
4
): 044402. DOI:
10.1088/1674-1056/ad1500
Abstract
(
85
)
HTML
(
3
)
PDF
(2972KB)(
71
)
Knowledge map
Through equilibrium and non-equilibrium molecular dynamics simulations, we have demonstrated the inhibitory effect of composition graded interface on thermal transport behavior in lateral heterostructures. Specifically, we investigated the influence of composition gradient length and heterogeneous particles at the silicene/germanene (SIL/GER) heterostructure interface on heat conduction. Our results indicate that composition graded interface at the interface diminishes the thermal conductivity of the heterostructure, with a further reduction observed as the length increases, while the effect of the heterogeneous particles can be considered negligible. To unveil the influence of composition graded interface on thermal transport, we conducted phonon analysis and identified the presence of phonon localization within the interface composition graded region. Through these analyses, we have determined that the decrease in thermal conductivity is correlated with phonon localization within the heterostructure, where a stronger degree of phonon localization signifies poorer thermal conductivity in the material. Our research findings not only contribute to understanding the impact of interface gradient-induced phonon localization on thermal transport but also offer insights into the modulation of thermal conductivity in heterostructures.