| INTERDISCIPLINARY PHYSICS AND RELATED AREAS OF SCIENCE AND TECHNOLOGY |
Prev
Next
|
|
|
Effect of antioxidants on the efficiency of jet milling and the powder characteristics of Sm2Co17 permanent magnets |
| Da-Shuai Xu(许大帅)1,2, Lei Liu(刘雷)2,3,†, Jian-Hui Yuan(袁建辉)1,‡, Bo Zhou(周波)2, Chuang-Hui Dong(董创辉)2, Feng-Qing Wang(王凤青)2,3, Yong Ding(丁勇)2,3, Ying-Li Sun(孙颖莉)2,3, and A-Ru Yan(闫阿儒)2,3 |
1 School of Materials Science and Engineering, Shanghai University of Engineering Science, Shanghai 201620, China;
2 CISRI & NIMTE Joint Innovation Center for Rare Earth Permanent Magnets, CAS Key Laboratory of Magnetic Materials and Devices, Zhejiang Province Key Laboratory of Magnetic Materials and Application Technology, Ningbo Institute of Materials Technology and Engineering, Chinese Academy of Sciences, Ningbo 315201, China;
3 University of Chinese Academy of Sciences, Beijing 100049, China |
|
|
|
|
Abstract This study investigated the effect of antioxidants on the grinding efficiency, magnetic powder characteristics, microstructure, and magnetic properties of 2:17 type SmCo permanent magnet materials. The results show that adding antioxidants helps improve the dispersion among magnetic powders, leading to a 33.3% decrease in jet milling time and a 15.8% increase in magnet powder production yield. Additionally, adding antioxidants enhances the oxidation resistance of the magnetic powders. After being stored in a constant temperature air environment at 25 ${^\circ}$C for 48 h, the O content in the powder decreased by 33% compared to samples without antioxidants. While in the magnet body, the O content decreased from 0.21 wt.% to 0.14 wt.%, which helps increase the effective Sm content and domain wall pinning uniformity in the magnet. Excellent magnetic properties were obtained in the magnet with added antioxidants: $B_{\rm r} = 11.6$ kGs, ${\rm SF} = 79.6 $%, $H_{\rm cj} = 16.8$ kOe, and $(BH)_{\max} = 32.5 $ MGOe.
|
Received: 04 April 2024
Revised: 16 May 2024
Accepted manuscript online: 07 June 2024
|
|
PACS:
|
81.20.Ev
|
(Powder processing: powder metallurgy, compaction, sintering, mechanical alloying, and granulation)
|
| |
75.50.Ww
|
(Permanent magnets)
|
| |
81.16.Pr
|
(Micro- and nano-oxidation)
|
| |
81.40.-z
|
(Treatment of materials and its effects on microstructure, nanostructure, And properties)
|
|
| Fund: Project supported by the National Key R&D Program of China (Grant No. 2021YFB3803003), the Youth Innovation Promotion Association of Chinese Academy of Sciences (Grant No. 2023311), Zhejiang Public Welfare Technology Application Research Project (Grant No. LGG22E010013), and Class III Peak Discipline of Shanghai-Materials Science and Engineering (High-Energy Beam Intelligent Processing and Green Manufacturing). |
Corresponding Authors:
Lei Liu, Jian-Hui Yuan
E-mail: liulei@nimte.ac.cn;yuanjh@sues.edu.cn
|
Cite this article:
Da-Shuai Xu(许大帅), Lei Liu(刘雷), Jian-Hui Yuan(袁建辉), Bo Zhou(周波), Chuang-Hui Dong(董创辉), Feng-Qing Wang(王凤青), Yong Ding(丁勇), Ying-Li Sun(孙颖莉), and A-Ru Yan(闫阿儒) Effect of antioxidants on the efficiency of jet milling and the powder characteristics of Sm2Co17 permanent magnets 2024 Chin. Phys. B 33 098103
|
[1] Wu H C, Liu Z, Zhang C Y, Yang Q Q, Lu H M, Chen G X, Wang X M, Li Y, Chen R J and Yan A R 2022 Journal of Rare Earths 40 102
[2] Wang S, Fang Y K, Wang C, Wang L, Zhu M G, Li W and Hadjipanayis G C 2020 J. Magn. Magn. Mater. 510 166942
[3] Yu N J, Zhu M G, Song L W, Fang Y K, Song K K, Wang Q and Li W 2018 J. Magn. Magn. Mater. 452 272
[4] Feng H B, Chen H S, Guo Z H, Yu R H and Li W 2010 Intermetallics 18 1067
[5] Zhou B, Ding Y, Liu L, Sun Y L, Wang F X, Xu D S, Hu F Q, Wang F Q, Liang J C and Yan A 2023 J. Alloys Compd. 969 172444
[6] Yu N J, Li Y C, Ren Z S, Pan M X, Yang H F, Wu Q, Ge H L, Zhu M G and Li W 2023 J. Mater. Sci. Technol. 153 159
[7] Zhang Y, Cao X, Tan H T, Gill V, Lambourne A, Yan A Q and Huang Y Z 2021 Scripta Materialia 200 113911
[8] Cao J, Zhang T L, Liu J H, Xu H, Hu M Y, Xia W, Wang A, Wang H and Jiang C B 2021 J. Mater. Sci. Technol. 85 56
[9] Chen H B, Zheng J W, Qiao L, Ying Y, Jiang L Q and Che S L 2015 Advanced Powder Technology 26 618
[10] Chen H, Liu W Q, Li Z, Li Y Q, Yin Y T, Cui H Y and Yue M 2020 Materials Letters 267 127509
[11] Palaniandy S, Azizli K A M, Hussin H and Hashim S F S 2008 Minerals Engineering 21 380
[12] Paramasivam R and Vedaraman R 1992 Powder Technology 70 43
[13] Varinot C, Hiltgun S, Pons M N and Dodds J 1997 Chemical Engineering Science 52 3605
[14] Prziwara P, Breitung-Faes S and Kwade A 2018 Advanced Powder Technology 29 416
[15] Miethke L, Prziwara P, Finke J H and Breitung-Faes S 2021 Pharmaceutics 13 1434
[16] Godet-Morand L, Chamayou A and Dodds J 2002 Powder Technology 128 306
[17] Prziwara P, Breitung-Faes S and Kwade A 2019 Minerals Engineering 144 106030
[18] Yuan T, Song X, Zhou X L, Jia W, Musa M, Wang J D and Ma T Y 2020 J. Mater. Sci. Technol. 53 73
[19] Li T Y, Liu Z, Feng Y P, Liu L, Zhang C Y, Yan G H, Feng Z X, Lee D and Yan A 2018 J. Alloys Compd. 753 162
[20] Liu Z, Zhang C Y, Wu H C, Chen R J and Yan A R 2022 Materials 15 5160
[21] Zhang T L, Song Q, Wang H, Wang J M, Liu J H and Jiang C B 2018 J. Alloys Compd. 735 1971
[22] Wang Y Q, Yue M, Wu D, Zhang D T, Liu W Q, Zhang H G and Du Y H 2018 J. Alloys Compd. 741 495
[23] Zhang C Y, Liu Z, Li M, Liu L, Li T Y, Chen R J, Lee D and Yan A 2018 Scientific Reports 8 9103
[24] Pragnell W M, Evans H E and Williams A J 2012 J. Alloys Compd. 517 92
[25] Qadeer M I, Azhdar B, Hedenqvist M S and Savage S J 2012 Corrosion Science 65 453
[26] Liu S Q 2019 Chin. Phys. B 28 017501
[27] Liu B J, Wang H, Yu Q J, Xu H, Zhang T L, Liu J H and Jiang C B 2021 J. Alloys Compd. 872 159622
[28] Liu L, Liu Z, Chen R J, Liu X M, Yan A R, Lee D and Li W 2014 IEEE Transactions on Magnetics 50 2101704
[29] Matsuura Y, Maruyama R, Kato R, Tamura R, Ishigami K, Sumitani K, Kajiwara K and Nakamura T 2020 Appl. Phys. Lett. 117 022409 |
| No Suggested Reading articles found! |
|
|
Viewed |
|
|
|
Full text
|
|
|
|
|
Abstract
|
|
|
|
|
Cited |
|
|
|
|
Altmetric
|
|
blogs
Facebook pages
Wikipedia page
Google+ users
|
Online attention
Altmetric calculates a score based on the online attention an article receives. Each coloured thread in the circle represents a different type of online attention. The number in the centre is the Altmetric score. Social media and mainstream news media are the main sources that calculate the score. Reference managers such as Mendeley are also tracked but do not contribute to the score. Older articles often score higher because they have had more time to get noticed. To account for this, Altmetric has included the context data for other articles of a similar age.
View more on Altmetrics
|
|
|
