|
|
Fiber cladding SPR bending sensor characterized by two parameters |
Chunlan Liu(刘春兰)1,2, Jiangxi Hu(胡江西)1, Yong Wei(魏勇)1,†, Yudong Su(苏于东)1, Ping Wu(吴萍)1, Lingling Li(李玲玲)1, and Xiaoling Zhao(赵晓玲)1 |
1 College of Electronic & Information Engineering, Chongqing Three Gorges University, Chongqing 404100, China; 2 College of Electronic Engineering, Heilongjiang University, Harbin 150080, China |
|
|
Abstract A fiber cladding surface plasmon resonance (SPR) bending sensor is realized by the cladding of the fiber structure. By employing coating film, the sensing zone is protected and the toughness of the sensor increases. Three different sensing probes are tested, the experiment results indicate that the two parameters (wavelength sensitivity and light intensity sensitivity) sensing performances of the eccentric butt joint structures are superior to that of hetero-core structure, and the SPR bending sensor based on hetero-core structure is stable and uneasy to damage. By employing hetero-core fiber and silver film, a fiber cladding SPR bending sensor with better stabilization and sensing performance is realized. The proposed fabricating method of sensing probe with coating film provides a new approach for fiber SPR-distributed bending sensor.
|
Received: 02 June 2020
Revised: 07 July 2020
Accepted manuscript online: 28 July 2020
|
PACS:
|
07.07.Df
|
(Sensors (chemical, optical, electrical, movement, gas, etc.); remote sensing)
|
|
42.81.Cn
|
(Fiber testing and measurement of fiber parameters)
|
|
71.45.Gm
|
(Exchange, correlation, dielectric and magnetic response functions, plasmons)
|
|
Fund: Project supported by the National Natural Science Foundation of China (Grant No. 61705025), the Natural Science Foundation of Heilongjiang Province, China (Grant No. F2018027), the Fund from Chongqing Municipal Key Laboratory of Institutions of Higher Education (Grant No. [2017]3), the Program of Chongqing Development and Reform Commission (Grant No. 2017[1007]), the Natural Science Foundation of Chongqing, China (Grant Nos. cstc2019jcyj-msxmX0431 and cstc2018jcyjAX0817), the Science and Technology Project Affiliated to the Education Department of Chongqing Municipality, China (Grant Nos. KJQN201801217, KJQN201901226, and KJ1710247), and the Fundamental Research Funds for Chongqing Three Gorges University of China (Grant No. 19ZDPY08). |
Corresponding Authors:
†Corresponding author. E-mail: weiyong@hrbeu.edu.cn
|
Cite this article:
Chunlan Liu(刘春兰), Jiangxi Hu(胡江西), Yong Wei(魏勇), Yudong Su(苏于东), Ping Wu(吴萍), Lingling Li(李玲玲), and Xiaoling Zhao(赵晓玲) Fiber cladding SPR bending sensor characterized by two parameters 2020 Chin. Phys. B 29 120701
|
[1] Li S T2014 Electronic Test 000 39 [2] Zhou X, Ma F, Ling H, Yu B, Peng W and Yu Q Opt. Laser Technol. 124 105995 DOI: 10.1016/j.optlastec.2019.1059952020 [3] Laarossi I, Roldanvarona P, Quintelaincera M A, Rodriguezcobo L and Lopezhiguera J M Opt. Express 27 37122 DOI: 10.1364/OE.27.0371222019 [4] Magalhaes R, Silva S and Frazao O Photon. Sensors 10 1 DOI: 10.1007/s13320-019-0398-32020 [5] Schlaugat J, Patzer K, Hentrop T, Solle D, Pepelanova I, Schroder U and Scheper T Engineering in Life Sciences DOI: 10.1002/elsc.2019001402020 [6] Ahmed K, Jabin M A and Paul B K J. Comput. Electron. 19 321 DOI: 10.1007/s10825-019-01434-z2020 [7] Guo Y, Li J S, Li S G, Liu Y C, Meng X J, Bi W H, Lu H B, Cheng T L and Hao R Liquid Crystal 47 6 DOI: 10.1080/02678292.2019.16867772019 [8] Arcas A D S, Dutra F, Allil R C and Werneck M M Sensors 18 648 DOI: 10.3390/s180206482018 [9] Si Y, Lao J, Zhang X, Liu Y, Cai S, Gonzalezvila A, Li K, Huang Y, Yuan Y and Caucheteur C J. Lightwave Technol. 37 3495 DOI: 10.1109/JLT.502019 [10] Meng X J, Li J S, Guo Y, Li S G, Wang Y J, Bi W H and Lu H B Optik 216 164938 DOI: 10.1016/j.ijleo.2020.1649382020 [11] Wei Y, Liu C L, Zhang Y H, Luo Y X, Nie X F, Liu Z H, Zhang Y, Peng F and Zhou Z M Opt. Commun. 390 82 DOI: 10.1016/j.optcom.2016.12.0692017 [12] Zhang H, Chen Y, Feng X, Xiong X, Hu S, Jiang Z, Dong J, Zhu W, Qiu W and Guan H IEEE J. Select. Top. Quantum Electron. 25 1 DOI: 10.1109/JSTQE.2018.28681592019 [13] Zhao Y, Deng Z Q and Li J Sensors & Actuators B-Chemical 202 557 DOI: 10.1016/j.snb.2014.05.1272014 [14] Takagi K, Sasaki H, Seki A and Watanabe K Sensors and Actuators A-Physical 161 1 DOI: 10.1016/j.sna.2010.03.0092010 [15] Su Y, Wei Y, Zhang Y, Liu C, Nie X, Zhu Z and Liu L Sensors 18 2608 DOI: 10.3390/s180826082018 [16] Wang P, Semenova Y, Li Y, Wu Q and Farrell G Photon. Lett. Poland 2 67 DOI: 10.4302/plp.2010.2.052010 [17] Jing N, Zhou J Q, Li K W, Wang Z B, Zheng J and Xue P IEEE Sensors Journal 19 14 DOI: 10.1109/JSEN.2019.29084182019 [18] Arcas A D, Dutra F D, Allil R C S B and Werneck M M Sensors 18 2 DOI: 10.3390/s180100022018 [19] Li M, Bai Z, Zhang F, Hou M, Wang Y, Liao C, Jin W and Wang Y IEEE Photon. J. 9 1 DOI: 10.1109/JPHOT.2017.27021932017 [20] Liu Z H, Wei Y, Zhang Y, Liu C L, Zhang Y X, Zhao E M, Yang J, Liu C Y and Yuan L B Opt. Lett. 40 19 DOI: 10.1364/OL.40.0028262015 |
No Suggested Reading articles found! |
|
|
Viewed |
|
|
|
Full text
|
|
|
|
|
Abstract
|
|
|
|
|
Cited |
|
|
|
|
Altmetric
|
blogs
Facebook pages
Wikipedia page
Google+ users
|
Online attention
Altmetric calculates a score based on the online attention an article receives. Each coloured thread in the circle represents a different type of online attention. The number in the centre is the Altmetric score. Social media and mainstream news media are the main sources that calculate the score. Reference managers such as Mendeley are also tracked but do not contribute to the score. Older articles often score higher because they have had more time to get noticed. To account for this, Altmetric has included the context data for other articles of a similar age.
View more on Altmetrics
|
|
|