Please wait a minute...
Chinese Physics, 2005, Vol. 14(1): 163-168    DOI: 10.1088/1009-1963/14/1/030
PHYSICS OF GASES, PLASMAS, AND ELECTRIC DISCHARGES Prev   Next  

Two-dimensional temperature distribution inside a hemispherical bowl-shaped target for plasma source ion implantation

Liu Cheng-Sen (刘成森)ab, Wang Yan-Hui (王艳辉)a, Wang De-Zhen (王德真)a
a State Key Laboratory for Materials Modification by Laser, Ion and Electron Beams, Department of Physics, Dalian University of Technology, Dalian 116023, China; b Department of Physics, Liaoning Normal University, Dalian 116029, China
Abstract  One important parameter for the plasma source ion implantation (PSII) process is the target temperature obtained during the surface modification. Because the power input to the target being implanted can be large, its temperature is quite high. The target temperature prediction is useful, whether the high temperature is required in the experiment. In addition, there is likely to be temperature variation across the target surface, which can lead to locally different surface properties. In this paper, we have presented a model to predict and explain the temperature distribution on a hemispherical bowl-shaped vessel during plasma source ion implantation. A two-dimensional fluid model to derive both the ion flux to the target and the energy imparted to the substrate by the ions in the plasma sheath simulation is employed. The calculated energy input and radiative heat loss are used to predict the temperature rise and variation inside the sample in the thermal model. The shape factor of the target for radiation is taken into account in the radiative energy loss. The influence of the pulse duration and the pulsing frequency on the temperature distribution is investigated in detail. Our work shows that at high pulsing frequencies the temperature of the bowl will no longer rise with the increase of the pulsing frequency.
Keywords:  hemispherical bowl-shaped vessel      plasma source ion implantation      ion heating  
Received:  01 April 2004      Revised:  14 August 2004      Accepted manuscript online: 
PACS:  5225L  
  5250G  
  5250K  
Fund: Project supported by National Natural Science Foundation of China (Grant No 10275010)

Cite this article: 

Liu Cheng-Sen (刘成森), Wang Yan-Hui (王艳辉), Wang De-Zhen (王德真) Two-dimensional temperature distribution inside a hemispherical bowl-shaped target for plasma source ion implantation 2005 Chinese Physics 14 163

[1] Two-dimensional particle-in-cell plasma source ion implantation of a prolate spheroid target
Liu Cheng-Sen(刘成森), Han Hong-Ying(韩宏颖), Peng Xiao-Qing(彭晓晴), Chang Ye(昶叶), and Wang De-Zhen(王德真). Chin. Phys. B, 2010, 19(3): 035201.
[2] Ion pickup by the intrinsic low-frequency Alfvén waves with a spectrum
Lu Quan-Ming(陆全明), Li Xing(李醒), and Dong Chuan-Fei(董川飞). Chin. Phys. B, 2009, 18(5): 2101-.
[3] Influence of ion species ratio on grid-enhanced plasma source ion implantation
Wang Jiu-Li (王久丽), Zhang Gu-Ling (张谷令), Liu Yuan-Fu (刘元富), Wang You-Nian (王友年), Liu Chi-Zi (刘赤子), Yang Si-Ze (杨思泽). Chin. Phys. B, 2004, 13(1): 65-70.
No Suggested Reading articles found!