中国物理B ›› 2010, Vol. 19 ›› Issue (1): 17204-017204.doi: 10.1088/1674-1056/19/1/017204

• • 上一篇    下一篇

Ohmic contacts of 4H-SiC on ion-implantation layers

张岩1, 王守国2, 张义门3, 张玉明3   

  1. (1)Department of Electronic and Information Engineering, Harbin Institute of Technology Shenzhen Graduate School, Shenzhen 518055, China; (2)Department of Electronic and Information Engineering, Harbin Institute of Technology Shenzhen Graduate School, Shenzhen 518055, China;School of Information Science and Technology, Northwest University, Xi'an 710127, China; (3)School of Microelectronics, Xidian University, Xi'an 710071, China
  • 收稿日期:2009-04-03 修回日期:2009-05-18 出版日期:2010-01-15 发布日期:2010-01-15

Ohmic contacts of 4H-SiC on ion-implantation layers

Wang Shou-Guo(王守国)a)c), Zhang Yan(张岩)a), Zhang Yi-Men(张义门)b), and Zhang Yu-Ming(张玉明) b)   

  1. a Department of Electronic and Information Engineering, Harbin Institute of Technology Shenzhen Graduate School, Shenzhen 518055, China; b School of Microelectronics, Xidian University, Xi'an 710071, China;; c School of Information Science and Technology, Northwest University, Xi'an 710127, China
  • Received:2009-04-03 Revised:2009-05-18 Online:2010-01-15 Published:2010-01-15

摘要: The ohmic contacts of 4H-SiC are fabricated on nitrogen ion implanted layers made by performing box-like-profile implantation three and four times. Implantation parameters such as the standard deviation σ and the projection range Rp are calculated by the Monte Carlo simulator TRIM. Ni/Cr ohmic contacts on Si-face 4H-SiC implantation layers are measured by transfer length methods (TLMs). The results show that the values of sheet resistance Rsh are 30~kΩ /□ and 4.9~kΩ/□ and the values of specific contact resistance ρc of ohmic contacts are 7.1× 10-4Ω.cm2 and 9.5× 10-5Ω.cm2 for the implanted layers with implantation performed three and four times respectively.

Abstract: The ohmic contacts of 4H-SiC are fabricated on nitrogen ion implanted layers made by performing box-like-profile implantation three and four times. Implantation parameters such as the standard deviation σ and the projection range Rp are calculated by the Monte Carlo simulator TRIM. Ni/Cr ohmic contacts on Si-face 4H-SiC implantation layers are measured by transfer length methods (TLMs). The results show that the values of sheet resistance Rsh are 30 kΩ /□ and 4.9 kΩ/□ and the values of specific contact resistance $\rho_{\rm c}$ of ohmic contacts are 7.1× 10-4 Ω$\cdot$cm2 and 9.5 × 10-5Ω $\cdot$ cm2 for the implanted layers with implantation performed three and four times respectively.

Key words: silicon carbide, ion implantation, ohmic contact, sheet resistance

中图分类号:  (Metal-nonmetal contacts)

  • 73.40.Ns
68.55.Ln (Defects and impurities: doping, implantation, distribution, concentration, etc.) 73.40.Cg (Contact resistance, contact potential) 73.61.Le (Other inorganic semiconductors)