Please wait a minute...
Chin. Phys. B, 2012, Vol. 21(10): 105201    DOI: 10.1088/1674-1056/21/10/105201
PHYSICS OF GASES, PLASMAS, AND ELECTRIC DISCHARGES Prev   Next  

Fabricating a reactive surface on the fibroin film by a room-temperature plasma jet array for biomolecule immobilization

Chen Guang-Liang (陈光良)a, Zheng Xu (郑旭)a, Lü Guo-Hua (吕国华)b, Zhang Zhao-Xia (张朝霞)a, Sylvain Masseyc, Wilson Smithc, Michael Tatoulianc, Yang Si-Ze (杨思泽)b
a Key Laboratory of Advanced Textile Materials and Manufacturing Technology of Ministry of Education, and Engineering Research Center for Eco-Dyeing & Finishing of Textiles, Zhejiang Sci-Tech University, Hangzhou 310018, China;
b Key Laboratory of Soft Matter Physics, Institute of Physics, Chinese Academy of Sciences, Beijing 100190, China;
c École Nationale Supérieure de Chimie de Paris-Chimie ParisTech, Laboratoire de Génie des Procédés Plasmas et Traitements de Surfaces, Université Pierre et Marie Curie, Paris 75005, France
Abstract  A simple dielectric barrier discharge (DBD) jet array was designed with a liquid electrode and helium gas. The characteristics of the jet array discharge and the preliminary polymerization with acrylic acid (AA) monomer were presented. The plasma reactor can produce a cold jet array with a gas temperature lower than 315 K, using an applied discharge power between 6 W and 30 W (Vdis×Idis). A silk fibroin film (SFF) was modified using the jet array and AA monomer, and the treated SFF samples were characterized by atomic force microscopy (AFM), scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), and contact angle (CA). The deposition rate of the poly acrylic acid (PAA) was able to reach 300 nm/min, and the surface roughness and energy increased with the AA flow rate. The FTIR results indicate that the modified SFF had more carboxyl groups (-COOH) than the original SFF. This latter characteristic allowed the modified SFF to immobilize more quantities of antimicrobial peptide (AP, LL-37) which inhibited the Escherichia coli (E. Coli) effectively.
Keywords:  plasma jet array      polymerizing modification      fibroin film      antimicrobial property  
Received:  09 April 2012      Revised:  21 June 2012      Accepted manuscript online: 
PACS:  52.75.Hn (Plasma torches)  
  52.70.Kz (Optical (ultraviolet, visible, infrared) measurements)  
  52.80.Hc (Glow; corona)  
  87.68.+z  
Fund: Project supported by the National Natural Science Foundation of China (Grant No. 11175157), the Young Scientists Fund of the National Natural Science Foundation of China (Grant No. 11005151), the Natural Science Foundation of Zhejiang Province, China (Grant No. Y6100045), the Project for Zhejiang Provincial Key Innovation Team, China (Grant No. 2012R10038).
Corresponding Authors:  Chen Guang-Liang     E-mail:  glchen@zstu.edu.cn

Cite this article: 

Chen Guang-Liang (陈光良), Zheng Xu (郑旭), Lü Guo-Hua (吕国华), Zhang Zhao-Xia (张朝霞), Sylvain Massey, Wilson Smith, Michael Tatoulian, Yang Si-Ze (杨思泽) Fabricating a reactive surface on the fibroin film by a room-temperature plasma jet array for biomolecule immobilization 2012 Chin. Phys. B 21 105201

[1] Siow K S, Britcher L, Kumar S and Griesser H J 2006 Plasma Process. Polym. 3 392
[2] Chen G L, Zhou M Y, Zhang Z X, Lü G H, Massey S, Smith W and Tatoulian M 2011 Plasma Process. Polym. 8 701
[3] Xiong Z, Lu X, Cao Y, Ning Q, Ostrikov K, Lu Y, Zhou X and Liu J 2011 Appl. Phys. Lett. 99 253703
[4] Sarra-Bournet C, Turgeon S, Mantovani D and Larochae G 2006 Plasma Process. Polym. 3 506
[5] Tatoulian M, Arefi-khonsari and Borra J P 2007 Plasma Process. Polym. 4 360
[6] Cao Z, Walsh J L and Kong M G 2009 Appl. Phys. Lett. 94 021501
[7] Chen G L, Chen S H, Chen W X and Yang S Z 2008 Chin. Phys. B 17 4568
[8] Lommatzsch U and Ihde J 2009 Plasma Process. Polym. 6 642
[9] Raballand V, Benedikt J and von Keudell A 2008 Appl. Phys. Lett. 92 091502
[10] Anthony P, Herbert F, O'Neill L and Jaroszyńska-Wolińska J 2009 Chem. Mater. 21 4401
[11] Zhang X H, Huang J, Liu X D, Peng L, Guo L H, Lü G H, Chen W, Feng K C and Yang S Z 2009 J. Appl. Phys. 105 063302
[12] Brian L S, Biswa N G and Kunihide T 2008 Appl. Phys. Lett. 92 151503
[13] Li X C, Jia P Y, Yuan N and Chang Y Y 2012 Chin. Phys. B 21 045204
[14] Bai L Q, Zhu L J, Min S J, Liu L, Cai Y R and Yao J M 2008 Appl. Surf. Sci. 254 2988
[15] Dong L F, Mao Z G, Yin Z Q and Ran J X 2004 Appl. Phys. Lett. 84 5142
[16] Chen G L, Zhou M Y, Chen S H and Chen W X 2009 Journal of Hazardous Materials 172 786
[17] Chen G L, Chen S H, Chen W X and Yang S Z 2008 Surf. Coat. Technol. 202 4741
[18] Stopford J, Allen D, Aldrian O, Morshed M, Wittge J, Danilewsky A N and McNally P J 2011 Microelectronic Engineering 88 64
[19] Inagaki N 1996 Plasma Surface Modification and Plasma Polymerization (Basel: Technomic, Lancaster)
[20] Muller M and Oehr C 1999 Surf. Coat. Technol. 116 802
[21] Morent R, Geyter N, Trentesaux M, Gengembre L, Dubruel P, Leys C and Payen E 2010 Appl. Surf. Sci. 257 372
[1] Numerical simulation and experimental validation of multiphysics field coupling mechanisms for a high power ICP wind tunnel
Ming-Hao Yu(喻明浩), Zhe Wang(王哲), Ze-Yang Qiu(邱泽洋), Bo Lv(吕博), and Bo-Rui Zheng(郑博睿). Chin. Phys. B, 2021, 30(6): 065201.
[2] Characteristics of helium DC plasma jets at atmospheric pressure with multiple cathodes
Cheng Wang(王城), Zelong Zhang(张泽龙), Haichao Cui(崔海超), Weiluo Xia(夏维珞), Weidong Xia(夏维东). Chin. Phys. B, 2017, 26(8): 085207.
[3] Production of a large area diffuse arc plasma with multiple cathode
Cheng Wang(王城), Hai-Chao Cui(崔海超), Wan-Wan Li(李皖皖), Meng-Ran Liao(廖梦然), Wei-Luo Xia(夏维珞), Wei-Dong Xia(夏维东). Chin. Phys. B, 2017, 26(2): 025202.
[4] Controlling chaos based on a novel intelligent integral terminal sliding mode control in a rod-type plasma torch
Safa Khari, Zahra Rahmani, Behrooz Rezaie. Chin. Phys. B, 2016, 25(5): 050201.
[5] Three-dimensional modelling of the flow and heat transfer in a laminar non-transferred arc plasma torch
Li He-Ping (李和平), Chen Xi (陈熙). Chin. Phys. B, 2002, 11(1): 44-49.
No Suggested Reading articles found!