中国物理B ›› 2017, Vol. 26 ›› Issue (9): 98103-098103.doi: 10.1088/1674-1056/26/9/098103

• INTERDISCIPLINARY PHYSICS AND RELATED AREAS OF SCIENCE AND TECHNOLOGY • 上一篇    下一篇

Crystalline silicon surface passivation investigated by thermal atomic-layer-deposited aluminum oxide

Cai-Xia Hou(侯彩霞), Xin-He Zheng(郑新和), Rui Jia(贾锐), Ke Tao(陶科), San-Jie Liu(刘三姐), Shuai Jiang(姜帅), Peng-Fei Zhang(张鹏飞), Heng-Chao Sun(孙恒超), Yong-Tao Li(李永涛)   

  1. 1 Department of Physics, University of Science and Technology Beijing, Beijing 100083, China;
    2 Institute of Microelectronics, Chinese Academy of Sciences, Beijing 100029, China
  • 收稿日期:2017-02-27 修回日期:2017-06-01 出版日期:2017-09-05 发布日期:2017-09-05
  • 通讯作者: Xin-He Zheng, Rui Jia E-mail:xinhezheng@ustb.edu.cn;jiarui@ime.ac.cn
  • 基金资助:
    Project supported by the Beijing Municipal Science and Technology Commission, China (Grant No. Z151100003515003), the National Natural Science Foundation of China (Grant Nos. 110751402347, 61274134, 51402064, 61274059, and 51602340), the University of Science and Technology Beijing (USTB) Start-up Program, China (Grant No. 06105033), the Beijing Municipal Innovation and Research Base, China (Grant No. Z161100005016095), the Fundamental Research Funds for the Central Universities, China (Grant Nos. FRF-UM-15-032 and 06400071), and the Youth Innovation Promotion Association of Chinese Academy of Sciences (Grant No. 2015387).

Crystalline silicon surface passivation investigated by thermal atomic-layer-deposited aluminum oxide

Cai-Xia Hou(侯彩霞)1,2, Xin-He Zheng(郑新和)1, Rui Jia(贾锐)2, Ke Tao(陶科)2, San-Jie Liu(刘三姐)1, Shuai Jiang(姜帅)2, Peng-Fei Zhang(张鹏飞)2, Heng-Chao Sun(孙恒超)2, Yong-Tao Li(李永涛)2   

  1. 1 Department of Physics, University of Science and Technology Beijing, Beijing 100083, China;
    2 Institute of Microelectronics, Chinese Academy of Sciences, Beijing 100029, China
  • Received:2017-02-27 Revised:2017-06-01 Online:2017-09-05 Published:2017-09-05
  • Contact: Xin-He Zheng, Rui Jia E-mail:xinhezheng@ustb.edu.cn;jiarui@ime.ac.cn
  • Supported by:
    Project supported by the Beijing Municipal Science and Technology Commission, China (Grant No. Z151100003515003), the National Natural Science Foundation of China (Grant Nos. 110751402347, 61274134, 51402064, 61274059, and 51602340), the University of Science and Technology Beijing (USTB) Start-up Program, China (Grant No. 06105033), the Beijing Municipal Innovation and Research Base, China (Grant No. Z161100005016095), the Fundamental Research Funds for the Central Universities, China (Grant Nos. FRF-UM-15-032 and 06400071), and the Youth Innovation Promotion Association of Chinese Academy of Sciences (Grant No. 2015387).

RichHTML

0

PDF (PC)

432

赞

摘要： Atomic-layer-deposited (ALD) aluminum oxide (Al2O3) has demonstrated an excellent surface passivation for crystalline silicon (c-Si) surfaces, as well as for highly boron-doped c-Si surfaces. In this paper, water-based thermal atomic layer deposition of Al2O3 films are fabricated for c-Si surface passivation. The influence of deposition conditions on the passivation quality is investigated. The results show that the excellent passivation on n-type c-Si can be achieved at a low thermal budget of 250 ℃given a gas pressure of 0.15 Torr. The thickness-dependence of surface passivation indicates that the effective minority carrier lifetime increases drastically when the thickness of Al2O3 is larger than 10 nm. The influence of thermal post annealing treatments is also studied. Comparable carrier lifetime is achieved when Al2O3 sample is annealed for 15 min in forming gas in a temperature range from 400 ℃to 450 °C. In addition, the passivation quality can be further improved when a thin PECVD-SiNx cap layer is prepared on Al2O3, and an effective minority carrier lifetime of 2.8 ms and implied Voc of 721 mV are obtained. In addition, several novel methods are proposed to restrain blistering.

关键词: atomic layer deposition, Al2O3, surface passivation, effective minority carrier lifetime

Abstract: Atomic-layer-deposited (ALD) aluminum oxide (Al2O3) has demonstrated an excellent surface passivation for crystalline silicon (c-Si) surfaces, as well as for highly boron-doped c-Si surfaces. In this paper, water-based thermal atomic layer deposition of Al2O3 films are fabricated for c-Si surface passivation. The influence of deposition conditions on the passivation quality is investigated. The results show that the excellent passivation on n-type c-Si can be achieved at a low thermal budget of 250 ℃given a gas pressure of 0.15 Torr. The thickness-dependence of surface passivation indicates that the effective minority carrier lifetime increases drastically when the thickness of Al2O3 is larger than 10 nm. The influence of thermal post annealing treatments is also studied. Comparable carrier lifetime is achieved when Al2O3 sample is annealed for 15 min in forming gas in a temperature range from 400 ℃to 450 °C. In addition, the passivation quality can be further improved when a thin PECVD-SiNx cap layer is prepared on Al2O3, and an effective minority carrier lifetime of 2.8 ms and implied Voc of 721 mV are obtained. In addition, several novel methods are proposed to restrain blistering.

Key words: atomic layer deposition, Al2O3, surface passivation, effective minority carrier lifetime

中图分类号:  (Chemical vapor deposition (including plasma-enhanced CVD, MOCVD, ALD, etc.))

  • 81.15.Gh
81.65.Rv (Passivation) 88.40.jj (Silicon solar cells)