中国物理B ›› 2021, Vol. 30 ›› Issue (3): 38801-.doi: 10.1088/1674-1056/abd748

• INTERDISCIPLINARY PHYSICS AND RELATED AREAS OF SCIENCE AND TECHNOLOGY • 上一篇    下一篇

  

  • 收稿日期:2020-08-20 修回日期:2020-10-29 接受日期:2020-12-30 出版日期:2021-02-22 发布日期:2021-02-18

Improved efficiency and stability of perovskite solar cells with molecular ameliorating of ZnO nanorod/perovskite interface and Mg-doping ZnO

Zhenyun Zhang(张振雲), Lei Xu(许磊), and Junjie Qi(齐俊杰)†   

  1. 1 School of Materials Science and Engineering, University of Science and Technology Beijing, Beijing 100083, China
  • Received:2020-08-20 Revised:2020-10-29 Accepted:2020-12-30 Online:2021-02-22 Published:2021-02-18
  • Contact: †Corresponding author. E-mail: junjieqi@ustb.edu.cn
  • Supported by:
    Project supported by Beijing Natural Science Foundation, China (Grant No. 2202030), the National Natural Science Foundation of China (Grant No. 41422050303), the Program of Introducing Talents of Discipline to Universities (Grant No. B14003), and the Fundamental Research Funds for Central Universities, China (Grant Nos. FRF-GF-19-001A and FRF-GF-19-002B).

RichHTML

4

PDF (PC)

278

赞

补充材料

1

Abstract: Despite the advanced efficiency of perovskite solar cells (PSCs), electron transportation is still a pending issue. Here the polymer polyvinylpyrrolidone (PVP) is used to enhance the electron injection, which is thanks to the passivation of the defects at the interface between the ZnO electron transporting layer (ETL) and the perovskite. The application of the PVP layer inhibits the device degradation, and 80% of the primary efficiency is kept after 30 d storage in air condition. Additionally, the efficiency of the device is further enhanced by improving the conductivity and crystallinity of the ZnO ETL via Magnesium (Mg) doping in the ZnO nanorods (ZnO NRs). Moreover, the preparation parameters of the ZnO NRs are optimized. By employing the high-crystallinity ZnO ETL and the PVP layer, the power conversion efficiency (PCE) of the champion device is increased from 16.29% to 19.63%. These results demonstrate the advantages of combining mesoscale manipulation with interface modification and doping together.

Key words: perovskite solar cells ZnO nanorods, interface modification, preparation parameters, Mg doped ZnO

中图分类号:  (Efficiency and performance of solar cells)

  • 88.40.hj
78.67.Qa (Nanorods) 73.40.-c (Electronic transport in interface structures) 81.20.-n (Methods of materials synthesis and materials processing)