中国物理B ›› 2009, Vol. 18 ›› Issue (11): 4976-4980.doi: 10.1088/1674-1056/18/11/060

• • 上一篇    下一篇

Numerical study on the thermo-stress of ZrO2 thermal and barrier coatings by high-intensity pulsed ion beam irradiation

吴迪1, 刘臣2, 朱小鹏2, 雷明凯2   

  1. (1)College of Physical Science and Technology, Dalian University, Dalian 116622, China;Surface Engineering Laboratory, Dalian University of Technology, Dalian 116024, China; (2)Surface Engineering Laboratory, Dalian University of Technology, Dalian 116024, China
  • 收稿日期:2008-09-29 修回日期:2009-04-07 出版日期:2009-11-20 发布日期:2009-11-20
  • 基金资助:
    Project supported by the National Natural Science Foundation of China (Grant No 50575037) and the Doctoral Foundation of Dalian University of China (Grant No SBQ200810).

Numerical study on the thermo-stress of ZrO2 thermal and barrier coatings by high-intensity pulsed ion beam irradiation

Wu Di(吴迪)a)b),Liu Chen(刘臣) b), Zhu Xiao Peng(朱小鹏)b), and Lei Ming Kai(雷明凯)b)   

  1. a College of Physical Science and Technology, Dalian University, Dalian 116622, China; b Surface Engineering Laboratory, Dalian University of Technology, Dalian 116024, China
  • Received:2008-09-29 Revised:2009-04-07 Online:2009-11-20 Published:2009-11-20
  • Supported by:
    Project supported by the National Natural Science Foundation of China (Grant No 50575037) and the Doctoral Foundation of Dalian University of China (Grant No SBQ200810).

PDF (PC)

661

赞

摘要： This paper studies numerically the thermo-mechanical effects of ZrO2 thermal barrier coatings (TBCs) irradiated by a high-intensity pulsed ion beam in consideration of the surface structure. Taking the deposited energy of ion beams in TBCs as the source term in the thermal conduction equation, the distribution of temperature in TBCs was simulated. Then, based on the distribution, the evolution of thermal stress was calculated by the finite element method. The results show that tensile radial stress formed at the valley of TBC surfaces after irradiation by HIPIB. Therefore, if cracks happen, they must be at valleys instead of peaks. As for the stress waves, no matter whether through peak or valley position, tensile and compressive stresses are present alternately inside TBCs along the depth direction, and the strength of stress decreases with time.

Abstract: This paper studies numerically the thermo-mechanical effects of ZrO2 thermal barrier coatings (TBCs) irradiated by a high-intensity pulsed ion beam in consideration of the surface structure. Taking the deposited energy of ion beams in TBCs as the source term in the thermal conduction equation, the distribution of temperature in TBCs was simulated. Then, based on the distribution, the evolution of thermal stress was calculated by the finite element method. The results show that tensile radial stress formed at the valley of TBC surfaces after irradiation by HIPIB. Therefore, if cracks happen, they must be at valleys instead of peaks. As for the stress waves, no matter whether through peak or valley position, tensile and compressive stresses are present alternately inside TBCs along the depth direction, and the strength of stress decreases with time.

Key words: high-intensity pulsed ion beam, ZrO2 TBCs, stress field, numerical method

中图分类号:  (Mechanical and acoustical properties)

  • 68.60.Bs
65.40.De (Thermal expansion; thermomechanical effects) 68.35.B- (Structure of clean surfaces (and surface reconstruction)) 61.80.Jh (Ion radiation effects) 62.20.M- (Structural failure of materials) 02.70.Dh (Finite-element and Galerkin methods)