中国物理B ›› 2007, Vol. 16 ›› Issue (2): 542-547.doi: 10.1088/1009-1963/16/2/043

• • 上一篇    下一篇

Effect of annealing treatments on the microwave electromagnetic properties of amorphous FeCuNbSiB microwires

梁迪飞, 韩满贵, 鄢波, 邓龙江   

  1. State Key Laboratory of Electronic Thin Films \& Integrated Devices, University of Electronic Science and Technology of China, Chengdu 610054, China
  • 收稿日期:2006-04-10 修回日期:2006-08-03 出版日期:2007-02-20 发布日期:2007-02-20
  • 基金资助:
    Project supported by the Key Foundation of Science for the Young Scholars in University of Electronic Science and Technology of China (Grant No L08010301JX05013).

Effect of annealing treatments on the microwave electromagnetic properties of amorphous FeCuNbSiB microwires

Liang Di-Fei(梁迪飞), Han Man-Gui(韩满贵)†, Yan Bo(鄢波), and Deng Long-Jiang(邓龙江)   

  1. State Key Laboratory of Electronic Thin Films & Integrated Devices, University of Electronic Science and Technology of China, Chengdu 610054, China
  • Received:2006-04-10 Revised:2006-08-03 Online:2007-02-20 Published:2007-02-20
  • Supported by:
    Project supported by the Key Foundation of Science for the Young Scholars in University of Electronic Science and Technology of China (Grant No L08010301JX05013).

PDF (PC)

656

赞

摘要： The amorphous FeCuNbSiB microwires are fabricated by using the melt extraction method and annealed separately at temperatures T = 573, 673, 723 and 773K for 1h. The effect of annealing treatment on the microwave electromagnetic properties of FeCuNbSiB wires/wax composites has been investigated for the first time. It is found that in a frequency range of 0.5--4.0GHz, the complex permittivity, permeability, magnetic and electric loss tangents of FeCuNbSiB wires/wax composites are strongly dependent on the annealing temperature and frequency. For T = 573, 723 and 773K, two resonance peaks are found at frequency f = 1.2 and 3.3GHz. However, for T = 673K, only one resonance peak occurs at f = 3.3GHz. The resonance peak at f = 1.2GHz is believed to be due to the stress-induced anisotropy, while the resonance peak at f = 3.3GHz is attributed to the random anisotropy.

关键词: amorphous alloys, permeability, permittivity, microwires

Abstract: The amorphous FeCuNbSiB microwires are fabricated by using the melt extraction method and annealed separately at temperatures T = 573, 673, 723 and 773K for 1h. The effect of annealing treatment on the microwave electromagnetic properties of FeCuNbSiB wires/wax composites has been investigated for the first time. It is found that in a frequency range of 0.5--4.0GHz, the complex permittivity, permeability, magnetic and electric loss tangents of FeCuNbSiB wires/wax composites are strongly dependent on the annealing temperature and frequency. For T = 573, 723 and 773K, two resonance peaks are found at frequency f = 1.2 and 3.3GHz. However, for T = 673K, only one resonance peak occurs at f = 3.3GHz. The resonance peak at f = 1.2GHz is believed to be due to the stress-induced anisotropy, while the resonance peak at f = 3.3GHz is attributed to the random anisotropy.

Key words: amorphous alloys, permeability, permittivity, microwires

中图分类号:  (Magnetic annealing and temperature-hysteresis effects)

  • 75.60.Nt
75.50.Kj (Amorphous and quasicrystalline magnetic materials) 75.60.Ej (Magnetization curves, hysteresis, Barkhausen and related effects)