中国物理B ›› 2023, Vol. 32 ›› Issue (3): 30101-030101.doi: 10.1088/1674-1056/ac7f91

• •    下一篇

Application of the body of revolution finite-element method in a re-entrant cavity for fast and accurate dielectric parameter measurements

Tianqi Feng(冯天琦), Chengyong Yu(余承勇), En Li(李恩), and Yu Shi(石玉)   

  1. School of Electronic Science and Engineering, University of Electronic Science and Technology of China, Chengdu 611731, China
  • 收稿日期:2022-02-18 修回日期:2022-06-14 接受日期:2022-07-08 出版日期:2023-02-14 发布日期:2023-03-01
  • 通讯作者: Chengyong Yu E-mail:yu_cyong@163.com
  • 基金资助:
    Project supported by the National Natural Science Foundation of China (Grant No. 62001083) and the Guangdong Provincial Key Research and Development Project, China (Grant No. 2020B010179002).

Application of the body of revolution finite-element method in a re-entrant cavity for fast and accurate dielectric parameter measurements

Tianqi Feng(冯天琦), Chengyong Yu(余承勇), En Li(李恩), and Yu Shi(石玉)   

  1. School of Electronic Science and Engineering, University of Electronic Science and Technology of China, Chengdu 611731, China
  • Received:2022-02-18 Revised:2022-06-14 Accepted:2022-07-08 Online:2023-02-14 Published:2023-03-01
  • Contact: Chengyong Yu E-mail:yu_cyong@163.com
  • Supported by:
    Project supported by the National Natural Science Foundation of China (Grant No. 62001083) and the Guangdong Provincial Key Research and Development Project, China (Grant No. 2020B010179002).

摘要: In dielectrometry, traditional analytical and numerical algorithms are difficultly employed in complex resonant cavities. For a special kind of structure (a rotating resonant cavity), the body of revolution finite-element method (BOR-FEM) is employed to calculate the resonant parameters and dielectric parameters. In this paper, several typical resonant structures are selected for analysis and verification. Compared with the resonance parameter values in the literature and the simulation results of commercial software, the error of the BOR-FEM calculation is less than 0.9% and a single solution time is less than 1 s. Reentrant coaxial resonant cavities loaded with dielectric materials are analyzed using this method and compared with simulation results, showing good agreement. Finally, in this paper, the established BOR-FEM method is successfully applied with a machined cavity for the accurate measurement of the complex dielectric constant of dielectric materials. The test specimens were machined from polytetrafluoroethylene, fused silica and Al2O3, and the test results showed good agreement with the literature reference values.

关键词: microwave, resonance method, dielectric measurement, coaxial resonant cavity

Abstract: In dielectrometry, traditional analytical and numerical algorithms are difficultly employed in complex resonant cavities. For a special kind of structure (a rotating resonant cavity), the body of revolution finite-element method (BOR-FEM) is employed to calculate the resonant parameters and dielectric parameters. In this paper, several typical resonant structures are selected for analysis and verification. Compared with the resonance parameter values in the literature and the simulation results of commercial software, the error of the BOR-FEM calculation is less than 0.9% and a single solution time is less than 1 s. Reentrant coaxial resonant cavities loaded with dielectric materials are analyzed using this method and compared with simulation results, showing good agreement. Finally, in this paper, the established BOR-FEM method is successfully applied with a machined cavity for the accurate measurement of the complex dielectric constant of dielectric materials. The test specimens were machined from polytetrafluoroethylene, fused silica and Al2O3, and the test results showed good agreement with the literature reference values.

Key words: microwave, resonance method, dielectric measurement, coaxial resonant cavity

中图分类号:  (Theory of testing and techniques)

  • 01.40.gf