Accurate prediction of the critical heat flux for pool boiling on the heater substrate

doi:10.1088/1674-1056/ac523c

中国物理B ›› 2022, Vol. 31 ›› Issue (6): 64401-064401.doi: 10.1088/1674-1056/ac523c

Accurate prediction of the critical heat flux for pool boiling on the heater substrate

Fengxun Hai(海丰勋)¹, Wei Zhu(祝薇)^2,3,†, Xiaoyi Yang(杨晓奕)¹, and Yuan Deng(邓元)^2,4,‡

1 School of Energy and Power Engineering, Beihang University, Beijing 100083, China;
2 Research Institute for Frontier Science, Beihang University, Beijing 100083, China;
3 Beijing Advanced Innovation Center for Biomedical Engineering, Beihang University, Beijing 100083, China;
4 Hangzhou Innovation Institute, Beihang University, Hangzhou 310052, China

收稿日期:2021-11-25 修回日期:2022-01-25 接受日期:2022-02-07 出版日期:2022-05-17 发布日期:2022-06-07
通讯作者: Wei Zhu, Yuan Deng E-mail:zhu_wei@buaa.edu.cn;dengyuan@buaa.edu.cn
基金资助:
Project supported by the National Key Research and Development Program of China (Grant No. 2018YFA0702100), the National Natural Science Foundation of China (Grant No. U21A2079), the Zhejiang Provincial Key Research and Development Program of China (Grant Nos. 2021C05002 and 2021C01026), and the Fundamental Research Funds for the Central Universities.

Accurate prediction of the critical heat flux for pool boiling on the heater substrate

Fengxun Hai(海丰勋)¹, Wei Zhu(祝薇)^2,3,†, Xiaoyi Yang(杨晓奕)¹, and Yuan Deng(邓元)^2,4,‡

1 School of Energy and Power Engineering, Beihang University, Beijing 100083, China;
2 Research Institute for Frontier Science, Beihang University, Beijing 100083, China;
3 Beijing Advanced Innovation Center for Biomedical Engineering, Beihang University, Beijing 100083, China;
4 Hangzhou Innovation Institute, Beihang University, Hangzhou 310052, China

Received:2021-11-25 Revised:2022-01-25 Accepted:2022-02-07 Online:2022-05-17 Published:2022-06-07
Contact: Wei Zhu, Yuan Deng E-mail:zhu_wei@buaa.edu.cn;dengyuan@buaa.edu.cn
Supported by:
Project supported by the National Key Research and Development Program of China (Grant No. 2018YFA0702100), the National Natural Science Foundation of China (Grant No. U21A2079), the Zhejiang Provincial Key Research and Development Program of China (Grant Nos. 2021C05002 and 2021C01026), and the Fundamental Research Funds for the Central Universities.

摘要/Abstract

摘要： While the influence of liquid qualities, surface morphology, and operating circumstances on critical heat flux (CHF) in pool boiling has been extensively studied, the effect of the heater substrate has not. Based on the force balance analysis, a theoretical model has been developed to accurately predict the CHF in pool boiling on a heater substrate. An analytical expression for the CHF of a heater substrate is obtained in terms of the surface thermophysical property. It is indicated that the ratio of thermal conductivity (k) to the product of density (ρ) and specific heat (c_p) is an essential substrate property that influences the CHF. By modifying the well-known force-balance-based CHF model (Kandlikar model), the thermal characteristics of the substrate are taken into consideration. The bias of predicted CHF values are within 5% compared with the experimental results.

关键词: boiling heat transfer, kandlikar model, critical heat flux, heater substrate

Abstract: While the influence of liquid qualities, surface morphology, and operating circumstances on critical heat flux (CHF) in pool boiling has been extensively studied, the effect of the heater substrate has not. Based on the force balance analysis, a theoretical model has been developed to accurately predict the CHF in pool boiling on a heater substrate. An analytical expression for the CHF of a heater substrate is obtained in terms of the surface thermophysical property. It is indicated that the ratio of thermal conductivity (k) to the product of density (ρ) and specific heat (c_p) is an essential substrate property that influences the CHF. By modifying the well-known force-balance-based CHF model (Kandlikar model), the thermal characteristics of the substrate are taken into consideration. The bias of predicted CHF values are within 5% compared with the experimental results.

Key words: boiling heat transfer, kandlikar model, critical heat flux, heater substrate

中图分类号: (Analytical and numerical techniques)

44.05.+e

44.35.+c (Heat flow in multiphase systems) 44.25.+f (Natural convection)

Fengxun Hai(海丰勋), Wei Zhu(祝薇), Xiaoyi Yang(杨晓奕), and Yuan Deng(邓元). Accurate prediction of the critical heat flux for pool boiling on the heater substrate[J]. 中国物理B, 2022, 31(6): 64401-064401.

Fengxun Hai(海丰勋), Wei Zhu(祝薇), Xiaoyi Yang(杨晓奕), and Yuan Deng(邓元). Accurate prediction of the critical heat flux for pool boiling on the heater substrate[J]. Chin. Phys. B, 2022, 31(6): 64401-064401.

参考文献

[1] Pop E 2010 Nano Res. 3 147
[2] Forrest E, Williamson E, Buongiorno J, Hu L, Rubner M and Cohen R 2010 Int. J. Heat Mass Transfer 53 58
[3] Zhang W, Chai Y, Xu J, Liu G and Sun Y 2018 Appl. Surf. Sci. 457 891
[4] Yu X, Xu J, Liu G and Ji X 2021 Int. J. Heat Mass Transfer 164 120460
[5] Ji X, Xu J, Zhao Z and Yang W 2013 Exp. Therm. Fluid Sci. 48 198
[6] Quan X, Dong L and Cheng P 2014 Int. J. Heat Mass Transfer 76 452
[7] Rahman M M, Ölçeroǧlu E and McCarthy M 2014 Langmuir 30 11225
[8] Chu K, Enright R and Wang E N 2012 Appl. Phys. Lett. 100 241603
[9] Rohsenow W M and Griffith P 1956 Chem. Eng. Prog. Symp. Ser. 18 47
[10] Zuber N 1958 Trans. ASME 80 711
[11] Haramura Y and Katto Y 1983 Int. J. Heat Mass Transfer 26 389
[12] Yagov V V 2014 Int. J. Heat Mass Transfer 73 265
[13] Theofanous T G, Dinh T N, Tu J P and Dinh A T 2002 Exp. Therm. Fluid Sci. 26 793
[14] Mudawar I, Howard A H and Gersey C O 1997 Int. J. Heat Mass Transfer 40 2327
[15] Zuber N 1959 Atomic Energy Commission Report
[16] Kandlikar S G 2001 Journal of Heat Transfer 123 1071
[17] Golobič I and Bergles A E 1997 Exp. Therm. Fluid Sci. 15 43
[18] Lee S K, Liu M, Brown N R, Terrani K A and Lee Y 2020 Nucl. Technol. 206 339
[19] Mei Y, Shao Y, Gong S, Zhu Y and Gu H 2018 Int. J. Heat Mass Transfer 121 632
[20] Jun S, Kim J, You S M and Kim H Y 2016 Int. J. Heat Mass Transfer 103 277
[21] Rainey K N and You S M 2001 Int. J. Heat Mass Transfer 44 2589
[22] Kim J S, Girard A, Jun S, Lee J and You S M 2018 Int. J. Heat Mass Transfer 118 802
[23] Ferjancic K and Golobic I 2002 Exp. Therm. Fluid 25 565
[24] Arik M and Bar-Cohen A 2003 Int. J. Heat Mass Transfer 46 3755
[25] Tachibana F, Akiyama M and Kawamura H 1967 J. Nucl. Sci. Technol. 4 121
[26] Westwater J W, Hwalek J J and Irving M E 1986 Ind. Eng. Chem. Fundam 25 685
[27] Zhang S Y, Zhang X Z, Jin T, Tang K and Huang Y Z 2011 Cryogenics 4 7
[28] Grigoriev V A, Klimenko V V, Pavlov Y M and Ametistov E V 1978 The influence of some heating surface properties on the critical heat flux in cryogenic liquids boiling (Begel House Inc.)
[29] Cooke D and Kandlikar S G 2012 Int. J. Heat Mass Transfer 55 1004
[30] Jaikumar A and Kandlikar S G 2015 Int. J. Heat Mass Transfer 88 652
[31] Patil C M, Santhanam K S V and Kandlikar S G 2014 Int. J. Heat Mass Transfer 79 989
[32] Hong S, Jiang S, Hu Y, Dang C and Wang S 2019 Int. J. Heat Mass Transfer 136 235
[33] Kim J S, Girard A, Jun S, Lee J and You S M 2018 Int. J. Heat Mass Transfer 118 802
[34] Singh A, Mikic B B and Rohsenow W M 1976 ASME J. Heat Transfer 98 401
[35] Pioro I L, Rohsenow W and Doerffer S S 2004 Int. J. Heat Mass Transfer 47 5033
[36] Raghupathi P A and Kandlikar S G 2017 Journal of Heat Transfer 139 111502
[37] Lim D Y and Bang I C 2020 Int. J. Heat Mass Transfer 150 119360
[38] M J and W F 1931 Forschung auf dem Gebiete des Ingenieurwesens 2 435
[39] Kutateladze S S and Schneiderman L L 1953 USAEC Report, AECtr 3405 95
[40] Kutateladze S S 1951 Izv. Akad. Nauk SSSR, Otd. Tech. Nauk 4 529
[41] Kutateladze S S 1948 Kotloturbostroenie 3 10
[42] Lee S K, Liu M, Brown N R, Terrani K A, Blandford E D, Ban H, Jensen C B and Lee Y 2019 Int. J. Heat Mass Transfer 132 643
[43] Mei Y, Shao Y, Gong S, Zhu Y and Gu H 2018 Int. J. Heat Mass Transfer 121 632
[44] Magrini U and Nannei E 1975 J. Heat Transfer 97 173

Accurate prediction of the critical heat flux for pool boiling on the heater substrate

Accurate prediction of the critical heat flux for pool boiling on the heater substrate

RichHTML

PDF (PC)

赞

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

Metrics

本文评价

推荐阅读 0

[1]	Yundong Tang(汤云东), Jian Zou(邹建), Rodolfo C.C. Flesch, and Tao Jin(金涛). Effect of bio-tissue deformation behavior due to intratumoral injection on magnetic hyperthermia[J]. 中国物理B, 2023, 32(3): 34304-034304.
[2]	Zi-jie Zhu(祝子杰), Shu-qing Ma(马树青), Xiao-Qian Zhu(朱小谦), Qiang Lan(蓝强), Sheng-Chun Piao(朴胜春), and Yu-Sheng Cheng(程玉胜). Parallel optimization of underwater acoustic models: A survey[J]. 中国物理B, 2022, 31(10): 104301-104301.
[3]	Xiangyizheng Wu(吴祥议政), Jian Xu(徐健), Keling Gong(龚柯菱), Chongfeng Shao(邵崇峰), Yang Kou(寇洋), Yuxuan Zhang(张宇轩), Yong Bo(薄勇), and Qinjun Peng(彭钦军). Theoretical and experimental studies on high-power laser-induced thermal blooming effect in chamber with different gases[J]. 中国物理B, 2022, 31(8): 86105-086105.
[4]	Yun-Dong Tang(汤云东), Jian Zou(邹建), Rodolfo C C Flesch(鲁道夫 C C 弗莱施), Tao Jin(金涛), and Ming-Hua He(何明华). Thermal apoptosis analysis considering injection behavior optimization and mass diffusion during magnetic hyperthermia[J]. 中国物理B, 2022, 31(1): 14401-014401.
[5]	李依依, 张昊春. Establishment and evaluation of a co-effect structure with thermal concentration-rotation function in transient regime[J]. 中国物理B, 2020, 29(8): 84401-084401.
[6]	程雪涛, 梁新刚. Uniformity principle of temperature difference field in heat transfer optimization[J]. 中国物理B, 2019, 28(6): 64402-064402.
[7]	李艳红, 刘国强, 宋佳祥, 夏慧. Influence exerted by bone-containing target body on thermoacoustic imaging with current injection[J]. 中国物理B, 2019, 28(4): 44302-044302.
[8]	党思娜, 薛红军, 张晓燕, 瞿珏, 钟诚文, 陈思宇. Three-dimensional human thermoregulation model based on pulsatile blood flow and heating mechanism[J]. 中国物理B, 2018, 27(11): 114402-114402.
[9]	谭竣天, 张淑芳, 钱明灿, 罗海军, 吴芳, 龙兴明, 方亮, 魏大鹏, 胡宝山. Effect of graphene/ZnO hybrid transparent electrode on characteristics of GaN light-emitting diodes[J]. 中国物理B, 2018, 27(11): 114401-114401.
[10]	杨施政, 吕红亮, 张玉明, 张义门, 芦宾, 严思璐. Efficient thermal analysis method for large scale compound semiconductor integrated circuits based on heterojunction bipolar transistor[J]. 中国物理B, 2018, 27(10): 108101-108101.
[11]	刘冠楠, 刘冬. Reconstruction model for temperature and concentration profiles of soot and metal-oxide nanoparticles in a nanofluid fuel flame by using a CCD camera[J]. 中国物理B, 2018, 27(5): 54401-054401.
[12]	周杭波, 张刚. General theories and features of interfacial thermal transport[J]. 中国物理B, 2018, 27(3): 34401-034401.
[13]	程雪涛, 梁新刚. Role of entropy generation minimization in thermal optimization[J]. 中国物理B, 2017, 26(12): 120505-120505.
[14]	邢姣娇, 吴子华, 谢华清, 王元元, 李奕怀, 毛建辉. Performance of thermoelectric generator with graphene nanofluid cooling[J]. 中国物理B, 2017, 26(10): 104401-104401.
[15]	钱明灿, 张淑芳, 罗海军, 龙兴明, 吴芳, 方亮, 魏大鹏, 孟凡明, 胡宝山. Simulation on effect of metal/graphene hybrid transparent electrode on characteristics of GaN light emitting diodes[J]. 中国物理B, 2017, 26(10): 104402-104402.