中国物理B ›› 2024, Vol. 33 ›› Issue (3): 38501-038501.doi: 10.1088/1674-1056/ad1480

• • 上一篇    下一篇

Modeling the performance of perovskite solar cells with inserting porous insulating alumina nanoplates

Zhaoyao Pan(潘赵耀), Jinpeng Yang(杨金彭), and Xiaoshuang Shen(沈小双)†   

  1. College of Physical Science and Technology, Yangzhou University, Yangzhou 225009, China
  • 收稿日期:2023-09-15 修回日期:2023-11-17 接受日期:2023-12-12 出版日期:2024-02-22 发布日期:2024-02-29
  • 通讯作者: Xiaoshuang Shen E-mail:xsshen@yzu.edu.cn
  • 基金资助:
    Project supported by the Qing-Lan Project from Yangzhou University and the National Natural Science Foundation of China (Grant No. 62375234). We would like to acknowledge Professor Yadong Xu at Soochow University for the support of electromagnetic simulations. All data is available in the main text or the supplementary materials.

Modeling the performance of perovskite solar cells with inserting porous insulating alumina nanoplates

Zhaoyao Pan(潘赵耀), Jinpeng Yang(杨金彭), and Xiaoshuang Shen(沈小双)†   

  1. College of Physical Science and Technology, Yangzhou University, Yangzhou 225009, China
  • Received:2023-09-15 Revised:2023-11-17 Accepted:2023-12-12 Online:2024-02-22 Published:2024-02-29
  • Contact: Xiaoshuang Shen E-mail:xsshen@yzu.edu.cn
  • Supported by:
    Project supported by the Qing-Lan Project from Yangzhou University and the National Natural Science Foundation of China (Grant No. 62375234). We would like to acknowledge Professor Yadong Xu at Soochow University for the support of electromagnetic simulations. All data is available in the main text or the supplementary materials.

RichHTML

0

PDF (PC)

66

赞

补充材料

1

摘要： Peng et al. [Science 379 683 (2023)] reported an effective method to improve the performance of perovskite solar cells by using thicker porous insulator contact (PIC)-alumina nanoplates. This method overcomes the trade-off between the open-circuit voltage and the fill factor through two mechanisms: reduced surface recombination velocity and increased bulk recombination lifetime due to better perovskite crystallinity. From arguments of drift-diffusion simulations, we find that an increase in mobility and carrier recombination lifetime in bulk are the key factors for minimizing the resistance-effect from thicker PICs and achieving a maximum power conversion efficiency (PCE) at approximately 25% reduced contact area. Furthermore, the partially replacement of perovskite films with thicker PICs would result in a reduction in short-current density, but the relative low refractive index of the PICs imbedded into the high refractive index perovskite creates light trapping structures that compensate for this loss.

关键词: perovskite solar cells, nanostructure, crystalline, mobility

Abstract: Peng et al. [Science 379 683 (2023)] reported an effective method to improve the performance of perovskite solar cells by using thicker porous insulator contact (PIC)-alumina nanoplates. This method overcomes the trade-off between the open-circuit voltage and the fill factor through two mechanisms: reduced surface recombination velocity and increased bulk recombination lifetime due to better perovskite crystallinity. From arguments of drift-diffusion simulations, we find that an increase in mobility and carrier recombination lifetime in bulk are the key factors for minimizing the resistance-effect from thicker PICs and achieving a maximum power conversion efficiency (PCE) at approximately 25% reduced contact area. Furthermore, the partially replacement of perovskite films with thicker PICs would result in a reduction in short-current density, but the relative low refractive index of the PICs imbedded into the high refractive index perovskite creates light trapping structures that compensate for this loss.

Key words: perovskite solar cells, nanostructure, crystalline, mobility

中图分类号:  (Semiconductor-device characterization, design, and modeling)

  • 85.30.De
73.50.Pz (Photoconduction and photovoltaic effects) 78.20.Bh (Theory, models, and numerical simulation)