中国物理B ›› 2023, Vol. 32 ›› Issue (10): 107801-107801.doi: 10.1088/1674-1056/ace1d8

• • 上一篇    下一篇

Improving efficiency of n-i-p perovskite solar cells enabled by 3-carboxyphenylboronic acid additive

Bin-Jie Li(李斌杰), Jia-Wen Li(李嘉文), Gen-Jie Yang(杨根杰), Meng-Ge Wu(吴梦鸽), and Jun-Sheng Yu(于军胜)†   

  1. State Key Laboratory of Electronic Thin Films and Integrated Devices, School of Optoelectronic Science and Engineering, University of Electronic Science and Technology of China(UESTC), Chengdu 610054, China
  • 收稿日期:2023-04-27 修回日期:2023-06-15 接受日期:2023-06-27 出版日期:2023-09-21 发布日期:2023-09-27
  • 通讯作者: Jun-Sheng Yu E-mail:jsyu@uestc.edu.cn
  • 基金资助:
    Project supported by the Regional Joint Fund of the National Science Foundation of China (Grant No. U21A20492), and the Sichuan Science and Technology Program (Grant Nos. 2022YFH0081, 2022YFG0012, and 2022YFG0013). This work was also sponsored by the Sichuan Province Key Laboratory of Display Science and Technology, and Qiantang Science & Technology Innovation Center.

Improving efficiency of n-i-p perovskite solar cells enabled by 3-carboxyphenylboronic acid additive

Bin-Jie Li(李斌杰), Jia-Wen Li(李嘉文), Gen-Jie Yang(杨根杰), Meng-Ge Wu(吴梦鸽), and Jun-Sheng Yu(于军胜)†   

  1. State Key Laboratory of Electronic Thin Films and Integrated Devices, School of Optoelectronic Science and Engineering, University of Electronic Science and Technology of China(UESTC), Chengdu 610054, China
  • Received:2023-04-27 Revised:2023-06-15 Accepted:2023-06-27 Online:2023-09-21 Published:2023-09-27
  • Contact: Jun-Sheng Yu E-mail:jsyu@uestc.edu.cn
  • Supported by:
    Project supported by the Regional Joint Fund of the National Science Foundation of China (Grant No. U21A20492), and the Sichuan Science and Technology Program (Grant Nos. 2022YFH0081, 2022YFG0012, and 2022YFG0013). This work was also sponsored by the Sichuan Province Key Laboratory of Display Science and Technology, and Qiantang Science & Technology Innovation Center.

RichHTML

1

PDF (PC)

111

赞

补充材料

1

摘要： In the past period of time, perovskite solar cells have gained tremendous developments in improving photovoltaic performance, but they still face severe challenges. Defects in perovskite layers, especially at grain boundaries, severely limit the stabilization and efficiency of solar cells. In this work, we adopt 3-carboxyphenylboronic acid (CPBA) for modifying defects in perovskite thin films. Through the interaction among the carboxyl group, boronic acid and lead ions in the perovskite film, the crystallization effect of the perovskite molecular is greatly optimized. Moreover, the film defects are spontaneously passivated and the band gap is reduced, increasing the open circuit voltage and fill factor. Therefore, power conversion efficiency has been increased from 17.25% to 20.20%. This discovery provides a potential strategy for passivating the trap states in perovskite and enhancing the properties of devices.

关键词: passivation, defects, 3-carboxyphenylboronic acid, perovskite solar cells

Abstract: In the past period of time, perovskite solar cells have gained tremendous developments in improving photovoltaic performance, but they still face severe challenges. Defects in perovskite layers, especially at grain boundaries, severely limit the stabilization and efficiency of solar cells. In this work, we adopt 3-carboxyphenylboronic acid (CPBA) for modifying defects in perovskite thin films. Through the interaction among the carboxyl group, boronic acid and lead ions in the perovskite film, the crystallization effect of the perovskite molecular is greatly optimized. Moreover, the film defects are spontaneously passivated and the band gap is reduced, increasing the open circuit voltage and fill factor. Therefore, power conversion efficiency has been increased from 17.25% to 20.20%. This discovery provides a potential strategy for passivating the trap states in perovskite and enhancing the properties of devices.

Key words: passivation, defects, 3-carboxyphenylboronic acid, perovskite solar cells

中图分类号:  (Photoconduction and photovoltaic effects)

  • 78.56.-a
88.40.hj (Efficiency and performance of solar cells) 73.61.-r (Electrical properties of specific thin films) 61.72.-y (Defects and impurities in crystals; microstructure)