中国物理B ›› 2015, Vol. 24 ›› Issue (11): 116803-116803.doi: 10.1088/1674-1056/24/11/116803

• CONDENSED MATTER: STRUCTURAL, MECHANICAL, AND THERMAL PROPERTIES • 上一篇    下一篇

Low contact resistivity between Ni/Au and p-GaN through thin heavily Mg-doped p-GaN and p-InGaN compound contact layer

李晓静, 赵德刚, 江德生, 陈平, 朱建军, 刘宗顺, 乐伶聪, 杨静, 何晓光   

  1. State Key Laboratory on Integrated Optoelectronics, Institute of Semiconductors, Chinese Academy of Sciences, Beijing 100083, China
  • 收稿日期:2015-04-20 修回日期:2015-08-19 出版日期:2015-11-05 发布日期:2015-11-05
  • 通讯作者: Zhao De-Gang E-mail:dgzhao@red.semi.ac.cn
  • 基金资助:
    Project support by the National Natural Science Foundation of China (Grant Nos. 61474110, 61377020, 61376089, 61223005, and 61176126) and the National Science Fund for Distinguished Young Scholars, China (Grant No. 60925017).

Low contact resistivity between Ni/Au and p-GaN through thin heavily Mg-doped p-GaN and p-InGaN compound contact layer

Li Xiao-Jing (李晓静), Zhao De-Gang (赵德刚), Jiang De-Sheng (江德生), Chen Ping (陈平), Zhu Jian-Jun (朱建军), Liu Zong-Shun (刘宗顺), Le Ling-Cong (乐伶聪), Yang Jing (杨静), He Xiao-Guang (何晓光)   

  1. State Key Laboratory on Integrated Optoelectronics, Institute of Semiconductors, Chinese Academy of Sciences, Beijing 100083, China
  • Received:2015-04-20 Revised:2015-08-19 Online:2015-11-05 Published:2015-11-05
  • Contact: Zhao De-Gang E-mail:dgzhao@red.semi.ac.cn
  • Supported by:
    Project support by the National Natural Science Foundation of China (Grant Nos. 61474110, 61377020, 61376089, 61223005, and 61176126) and the National Science Fund for Distinguished Young Scholars, China (Grant No. 60925017).

摘要: Thin heavily Mg-doped InGaN and GaN compound contact layer is used to form Ni/Au Ohmic contact to p-GaN. The growth conditions of the compound contact layer and its effect on the performance of Ni/Au Ohmic contact to p-GaN are investigated. It is confirmed that the specific contact resistivity can be lowered nearly two orders by optimizing the growth conditions of compound contact layer. When the flow rate ratio between Mg and Ga gas sources of p++-InGaN layer is 10.6% and the thickness of p++-InGaN layer is 3 nm, the lowest specific contact resistivity of 3.98×10-5Ω·cm2 is achieved. In addition, the experimental results indicate that the specific contact resistivity can be further lowered to 1.07×10-7Ω ·cm2 by optimizing the alloying annealing temperature to 520 ℃.

关键词: Ohmic contact, growth conditions, compound contact layer, tunneling

Abstract: Thin heavily Mg-doped InGaN and GaN compound contact layer is used to form Ni/Au Ohmic contact to p-GaN. The growth conditions of the compound contact layer and its effect on the performance of Ni/Au Ohmic contact to p-GaN are investigated. It is confirmed that the specific contact resistivity can be lowered nearly two orders by optimizing the growth conditions of compound contact layer. When the flow rate ratio between Mg and Ga gas sources of p++-InGaN layer is 10.6% and the thickness of p++-InGaN layer is 3 nm, the lowest specific contact resistivity of 3.98×10-5Ω·cm2 is achieved. In addition, the experimental results indicate that the specific contact resistivity can be further lowered to 1.07×10-7Ω ·cm2 by optimizing the alloying annealing temperature to 520 ℃.

Key words: Ohmic contact, growth conditions, compound contact layer, tunneling

中图分类号:  (Surface and interface dynamics and vibrations)

  • 68.35.Ja
61.72.uj (III-V and II-VI semiconductors) 61.82.Bg (Metals and alloys) 67.25.bh (Films and restricted geometries)