Chin. Phys. B ›› 2013, Vol. 22 ›› Issue (1): 15201-015201.doi: 10.1088/1674-1056/22/1/015201

• PHYSICS OF GASES, PLASMAS, AND ELECTRIC DISCHARGES • 上一篇    下一篇

Design and realization of magnetic-type absorber with broadened operating frequency band

周永江, 庞永强, 程海峰   

  1. Science and Technology on Advanced Ceramic Fibers and Composites Laboratory, College of Aerospace and Materials Engineering,National University of Defense Technology, Changsha 410073, China
  • 收稿日期:2012-04-19 修回日期:2012-06-21 出版日期:2012-12-01 发布日期:2012-12-01
  • 基金资助:
    Project supported by the Aeronautical Science Foundation of China (Grant No. 2011ZF88013).

Design and realization of magnetic-type absorber with broadened operating frequency band

Zhou Yong-Jiang (周永江), Pang Yong-Qiang (庞永强), Cheng Hai-Feng (程海峰)   

  1. Science and Technology on Advanced Ceramic Fibers and Composites Laboratory, College of Aerospace and Materials Engineering,National University of Defense Technology, Changsha 410073, China
  • Received:2012-04-19 Revised:2012-06-21 Online:2012-12-01 Published:2012-12-01
  • Contact: Zhou Yong-Jiang E-mail:paniamer@yahoo.cn
  • Supported by:
    Project supported by the Aeronautical Science Foundation of China (Grant No. 2011ZF88013).

PDF (PC)

824

赞

摘要： In this paper, we present an efficient method to obtain absorbers with broadened operating frequency bands. They are accomplished by using the conventional magnetic absorbing materials (MAMs) in the forms of array and mesh structures, which are similar to those in the case of frequency slective surface. The proposed approach is verified not only by simulations but also by experimental results under the normal incidence at microwave frequencies. Moreover, the wideband absorber is lighter than the conventional magnetic absorber. These results indicate that our proposed absorbing structures can be used for designing good electromagnetic absorbers.

关键词: magnetic absorbing material, periodic structure, bandwidth

Abstract: In this paper, we present an efficient method to obtain absorbers with broadened operating frequency bands. They are accomplished by using the conventional magnetic absorbing materials (MAMs) in the forms of array and mesh structures, which are similar to those in the case of frequency slective surface. The proposed approach is verified not only by simulations but also by experimental results under the normal incidence at microwave frequencies. Moreover, the wideband absorber is lighter than the conventional magnetic absorber. These results indicate that our proposed absorbing structures can be used for designing good electromagnetic absorbers.

Key words: magnetic absorbing material, periodic structure, bandwidth

中图分类号:  (Emission, absorption, and scattering of electromagnetic radiation ?)

  • 52.25.Os
68.35.bt (Other materials) 42.25.Bs (Wave propagation, transmission and absorption)