中国物理B ›› 1998, Vol. 7 ›› Issue (8): 589-597.doi: 10.1088/1004-423X/7/8/006

• • 上一篇    下一篇

THE ANNEALING EFFECT OF CRYSTAL 4H-SiC FILMS PREPARED BY PULSED LASER DEPOSITION

王玉霞1, 温军1, 汤业庆1, 郭震1, 汤洪高1, 吴建新2   

  1. (1)Department of Material Science and Engineering, University of Science and Technology of China, Hefei 230026, China; (2)Structure and Element Analysis Center, University of Science and Technology of China, Hefei 230026, China
  • 收稿日期:1997-11-10 修回日期:1998-03-18 出版日期:1998-08-20 发布日期:1998-08-20
  • 基金资助:
    Project supported by the National Natural Science Foundation of China.

THE ANNEALING EFFECT OF CRYSTAL 4H-SiC FILMS PREPARED BY PULSED LASER DEPOSITION

Wang Yu-xia (王玉霞)a, Wen Jun (温军)a, Tang Ye-qing (汤业庆)a, Guo Zhen (郭震)a, Tang Hong-gao (汤洪高)a, Wu Jian-xin (吴建新)b   

  1. a Department of Material Science and Engineering, University of Science and Technology of China, Hefei 230026, China; b Structure and Element Analysis Center, University of Science and Technology of China, Hefei 230026, China
  • Received:1997-11-10 Revised:1998-03-18 Online:1998-08-20 Published:1998-08-20
  • Supported by:
    Project supported by the National Natural Science Foundation of China.

摘要: SiC films were prepared by pulsed XeCl laser ablation of ceramic SiC target on Si(100) substrate at temperature 850℃ and post-deposition high temperature annealing above 1100℃ (1100℃-7 Pa). The surface morphology, crystal structure, composition and chemical state of the element in the films before and after annealing were studied by X-ray diffraction, transmission electron microscopy, scanning electron microscopy, Auger electron Spectrum, X-ray photoelectron spectrum and photoluminescence methods. It was found that the films were consisted of polycrystal 4H-SiC structure before annealing and were turned into singlecrystal epitaxial 4H-SiC after annealing. The surfaces of the films were smooth and the adhesion of films with the substrate was good. The films were transparent. Excited by the laser with wavelength 290 nm at room temperature, the films emitted two luminescence bands with the peaks at 377 nm and 560 nm. The emission at 377 nm was attributed to the combination of the transmission among the valence and conductor bands, while the one at 560 nm was possibly to be from exciton emission.

Abstract: SiC films were prepared by pulsed XeCl laser ablation of ceramic SiC target on Si(100) substrate at temperature 850℃ and post-deposition high temperature annealing above 1100℃ (1100℃ < T < 1400) in high vacuum (1.3 $\times$ 10-7 Pa). The surface morphology, crystal structure, composition and chemical state of the element in the films before and after annealing were studied by X-ray diffraction, transmission electron microscopy, scanning electron microscopy, Auger electron Spectrum, X-ray photoelectron spectrum and photoluminescence methods. It was found that the films were consisted of polycrystal 4H-SiC structure before annealing and were turned into singlecrystal epitaxial 4H-SiC after annealing. The surfaces of the films were smooth and the adhesion of films with the substrate was good. The films were transparent. Excited by the laser with wavelength 290 nm at room temperature, the films emitted two luminescence bands with the peaks at 377 nm and 560 nm. The emission at 377 nm was attributed to the combination of the transmission among the valence and conductor bands, while the one at 560 nm was possibly to be from exciton emission.

中图分类号:  (Kinetics of defect formation and annealing)

  • 61.72.Cc
81.15.Fg (Pulsed laser ablation deposition) 68.55.A- (Nucleation and growth) 68.55.-a (Thin film structure and morphology) 79.60.Dp (Adsorbed layers and thin films) 78.66.Li (Other semiconductors)