Effects of filler loading and surface modification on electrical and thermal properties of epoxy/montmorillonite composite

doi:10.1088/1674-1056/27/11/117806

中国物理B ›› 2018, Vol. 27 ›› Issue (11): 117806-117806.doi: 10.1088/1674-1056/27/11/117806

所属专题： SPECIAL TOPIC — 80th Anniversary of Northwestern Polytechnical University (NPU)

• SPECIAL TOPIC—Recent advances in thermoelectric materials and devices • 上一篇下一篇

Effects of filler loading and surface modification on electrical and thermal properties of epoxy/montmorillonite composite

Zi-Rui Jia(贾梓睿), Zhen-Guo Gao(高振国), Di Lan(兰笛), Yong-Hong Cheng(成永红), Guang-Lei Wu(吴广磊), Hong-Jing Wu(吴宏景)

1 School of Science, Northwestern Polytechnical University, Xi'an 710072, China;
2 Center of Nanomaterials for Renewable Energy(CNRE), State Key Laboratory of Electrical Insulation and Power Equipment, School of Electrical Engineering, Xi'an Jiaotong University, Xi'an 710049, China;
3 Institute of Materials for Energy and Environment, State Key Laboratory Breeding Based of New Fiber Materials and Modern Textile, College of Materials Science and Engineering, Qingdao University, Qingdao 266071, China

收稿日期:2018-07-04 修回日期:2018-08-28 出版日期:2018-11-05 发布日期:2018-11-05
通讯作者: Yong-Hong Cheng, Hong-Jing Wu E-mail:cyh@mail.xjtu.edu.cn;wuhongjing@mail.nwpu.edu.cn
基金资助:
Project supported by the National Natural Science Foundation of China (Grant Nos. 21806129, 51872238, 51407134, and 51521065), the China Postdoctoral Science Foundation (Grant No. 2016M590619), the Natural Science Foundation of Shandong Province, China (Grant No. ZR2016EEQ28), the State Key Laboratory of Electrical Insulation and Power Equipment, China (Grant No. EIPE14107), the Fundamental Research Funds for the Central Universities, China (Grant No. 3102018zy045), and the Natural Science Basic Research Plan in Shaanxi Province, China (Grant No. 2017JQ5116).

Effects of filler loading and surface modification on electrical and thermal properties of epoxy/montmorillonite composite

Zi-Rui Jia(贾梓睿)^1,2, Zhen-Guo Gao(高振国)^1,3, Di Lan(兰笛)¹, Yong-Hong Cheng(成永红)², Guang-Lei Wu(吴广磊)^2,3, Hong-Jing Wu(吴宏景)¹

1 School of Science, Northwestern Polytechnical University, Xi'an 710072, China;
2 Center of Nanomaterials for Renewable Energy(CNRE), State Key Laboratory of Electrical Insulation and Power Equipment, School of Electrical Engineering, Xi'an Jiaotong University, Xi'an 710049, China;
3 Institute of Materials for Energy and Environment, State Key Laboratory Breeding Based of New Fiber Materials and Modern Textile, College of Materials Science and Engineering, Qingdao University, Qingdao 266071, China

Received:2018-07-04 Revised:2018-08-28 Online:2018-11-05 Published:2018-11-05
Contact: Yong-Hong Cheng, Hong-Jing Wu E-mail:cyh@mail.xjtu.edu.cn;wuhongjing@mail.nwpu.edu.cn
Supported by:
Project supported by the National Natural Science Foundation of China (Grant Nos. 21806129, 51872238, 51407134, and 51521065), the China Postdoctoral Science Foundation (Grant No. 2016M590619), the Natural Science Foundation of Shandong Province, China (Grant No. ZR2016EEQ28), the State Key Laboratory of Electrical Insulation and Power Equipment, China (Grant No. EIPE14107), the Fundamental Research Funds for the Central Universities, China (Grant No. 3102018zy045), and the Natural Science Basic Research Plan in Shaanxi Province, China (Grant No. 2017JQ5116).

摘要/Abstract

摘要：

Epoxy-based composites containing montmorillonite (MMT) modified by silylation reaction with γ-aminopropyltriethoxysilane (γ-APTES) and 3-(glycidyloxypropyl) trimethoxysilane (GPTMS) are successfully prepared. The effects of filler loading and surface modification on the electrical and thermal properties of the epoxy/MMT composites are investigated. Compared with the pure epoxy resin, the epoxy/MMT composite, whether MMT is surface-treated or not, shows low dielectric permittivity, low dielectric loss, and enhanced dielectric strength. The MMT in the epoxy/MMT composite also influences the thermal properties of the composite by improving the thermal conductivity and stability. Surface functionalization of MMT not only conduces to the better dispersion of the nanoparticles, but also significantly affects the electric and thermal properties of the hybrid by influencing the interfaces between MMT and epoxy resin. Improved interfaces are good for enhancing the electric and thermal properties of nanocomposites. What is more, the MMT modified with GPTMS rather than γ-APTES is found to have greater influence on improving the interface between the MMT filler and polymer matrices, thus resulting in lower dielectric loss, lower electric conductivity, higher breakdown strength, lower thermal conductivity, and higher thermal stability.

关键词: modified epoxy resin, surface modification, electric property, thermal property

Abstract:

Key words: modified epoxy resin, surface modification, electric property, thermal property

中图分类号: (Nanoaggregates; nanocomposites)

78.67.Sc

81.65.-b (Surface treatments) 77.22.Jp (Dielectric breakdown and space-charge effects)

贾梓睿, 高振国, 兰笛, 成永红, 吴广磊, 吴宏景. Effects of filler loading and surface modification on electrical and thermal properties of epoxy/montmorillonite composite[J]. 中国物理B, 2018, 27(11): 117806-117806.

Zi-Rui Jia(贾梓睿), Zhen-Guo Gao(高振国), Di Lan(兰笛), Yong-Hong Cheng(成永红), Guang-Lei Wu(吴广磊), Hong-Jing Wu(吴宏景). Effects of filler loading and surface modification on electrical and thermal properties of epoxy/montmorillonite composite[J]. Chin. Phys. B, 2018, 27(11): 117806-117806.

参考文献 57

[1]	Marconnet A M, Yamamoto N, Panzer M A, Wardle L B and Goodson E K 2011 ACS Nano 5 4818 doi: 10.1021/nn200847u
[2]	Gulotty R, Castellino M, Jagdale P, Tagliaferro A and Balandin A A 2013 ACS Nano 7 5114 doi: 10.1021/nn400726g
[3]	Qu S H, Yu Y K, Lin K J, Liu P Y, Zheng C H, Wang L D, Xu T T, Wang Z D and Wu H J 2018 J. Mater. Sci. Mater. Electron. 29 1232 doi: 10.1007/s10854-017-8025-9
[4]	Jia Z R, Lin K J, Wu G L, Xing H and Wu H J 2018 Nano 13 1830005 doi: 10.1142/S1793292018300050
[5]	Feng A L, Wu G L, Pan C and Wang Y Q 2017 J. Nanosci. Nanotechnol. 17 3859 doi: 10.1166/jnn.2017.13987
[6]	Kim P, Jones S C, Hotchkiss P J, Kippelen B, Marder S R and Perry J W 2007 Adv. Mater. 19 1001 doi: 10.1002/adma.200602422
[7]	Wu G L, Cheng Y H, Wang K K, Wang Y Q and Feng A L 2016 J. Mater. Sci.:Mater. Electron. 27 5592 doi: 10.1007/s10854-016-4464-y
[8]	Yosefi N, Sun X Y, Lin X Y, Shen X, Jia J J, Zhang B, Tang B Z, Chan M S and Kim J K 2014 Adv. Mater. 26 5480 doi: 10.1002/adma.201305293
[9]	Huang X Y and Jiang P K 2015 Adv. Mater. 27 546 doi: 10.1002/adma.201401310
[10]	Wan L, Zhang X, Wu G L and Feng A L 2017 High Volt. 2 167 doi: 10.1049/hve.2017.0056
[11]	Feng Y, Li W L, Hou Y F, Yu Y, Cao W P, Zhang T D and Fei W D 2015 J. Mater. Chem. C 3 1250 doi: 10.1039/C4TC02183E
[12]	Zhang C, Li A, Zhao Y H, Bai S L and Zhang Y F 2018 Compos. Part. B Eng. 135 201 doi: 10.1016/j.compositesb.2017.10.026
[13]	Feng A L, Jia Z R, Yu Q, Zhang H X and Wu G L 2018 Nano 13 1850037 doi: 10.1142/S1793292018500376
[14]	Xie Q, Cheng Y H, Chen S Y, Wu G L, Wang Z D and Jia Z R 2017 J. Mater. Sci.:Mater. Electron. 28 17871 doi: 10.1007/s10854-017-7728-2
[15]	Li Y Y, Tian M Q, Lei Z P and Zhang J H 2018 J. Phys. D:Appl. Phys. 51 125309 doi: 10.1088/1361-6463/aaaf83
[16]	Wu G L, Li J L, Wang K K, Wang Y Q, Pan C and Feng A L 2017 J. Mater. Sci.:Mater. Electron. 28 6544 doi: 10.1007/s10854-017-6343-6
[17]	Ianchis R, Rosca I D, Ghiurea M, Spataru C I, Nicolae C A, Gabor R, Raditoiu V, Preda S, Fierascu R C and Donescu D 2015 Appl. Clay Sci. 103 28 doi: 10.1016/j.clay.2014.10.020
[18]	Tanaka T, Ohki Y, Ochi M, Harada M and Imai T 2007 IEEE Trans. Dielectr. Electr. Insul. 15 81
[19]	Yang K, Huang X Y, Fang L J, He J L and Jiang P K 2014 Nanoscale 6 14740 doi: 10.1039/C4NR03957B
[20]	Pan C, Zhang J Q, Kou K C, Zhang Y and Wu G L 2018 Int. J. Heat Mass Transfer 120 1
[21]	Azeez A A, Rhee K Y, Park S J and Hui D 2013 Compos. Part. B Eng. 45 308 doi: 10.1016/j.compositesb.2012.04.012
[22]	Thelakkadan A S, Coletti G, Guastavino F and Fina A 2011 Polym. Compos. 32 1499 doi: 10.1002/pc.21176
[23]	Huang Y, Min D M, Li S T, Wang X and Lin S J 2017 IEEE Trans. Dielectr. Electr. Insul. 24 3083 doi: 10.1109/TDEI.2017.006163
[24]	Lin J J, Chan Y N and Lan Y F 2010 Materials 3 2588 doi: 10.3390/ma3042588
[25]	Osman M A, Rupp J E P and Suter U W 2005 Polymer 46 1653 doi: 10.1016/j.polymer.2004.11.112
[26]	Piscitelli F, Scamardella A M, Romeo V, Lavorgna M, Barra G and Amendola E 2012 J. Appl. Polym. Sci. 124 616 doi: 10.1002/app.35015
[27]	Choi Y Y, Lee S H and Ryu S H 2009 Polym. Bull. 63 47 doi: 10.1007/s00289-009-0068-5
[28]	Zhou W Y 2011 J. Mater. Sci. 46 3883 doi: 10.1007/s10853-011-5309-y
[29]	Chu P F, Zhang H, Zhao J, Gao F, Guo Y F, Dang B and Zhang Z 2017 Compos. Part. A-Appl. S. 99 139 doi: 10.1016/j.compositesa.2017.03.036
[30]	Gao M Z and Zhang P H 2016 Acta Phys. Sin. 65 247802(in Chinese)
[31]	Essabir H, Boujmal R, Bensalah M O, Rodrigue D, Bouhfid R and Qaiss A E K 2016 Mech. Mater. 98 36 doi: 10.1016/j.mechmat.2016.04.008
[32]	Su L N, Tao Q, He H P, Zhu J X, Yuan P and Zhu R L 2013 J. Colloid Interface Sci. 391 16 doi: 10.1016/j.jcis.2012.08.077
[33]	Tuncer E, Sauers I, James D R, Ellis A R, Paranthaman M P, Aytuǧ T, Sathyamurthy S, More K L, Li J and Goyal A 2007 Nanotechnology 18 025703 doi: 10.1088/0957-4484/18/2/025703
[34]	Kripotou S, Pissis P, Savelyev Y V, Robota L P and Travinskaya T V 2010 J. Macromol. Sci. Part. B 49 86 doi: 10.1080/00222340903344309
[35]	Singha S and Thomas M J 2009 IEEE Trans. Dielectr. Electr. Insul. 16 531 doi: 10.1109/TDEI.2009.4815189
[36]	Fothergill J C, Nelson J K and Fu M 2004 Conference on Electrical Insulation & Dielectric Phenomena, October 17-202004, Boulder, USA, p. 406 doi: rence on Electrical Insulation
[37]	Singha S and Thomas M J 2008 IEEE Trans. Dielectr. Electr. Insul. 15 12 doi: 10.1109/T-DEI.2008.4446732
[38]	Morales A G and Taylor A C 2014 J. Mater. Sci. 49 1574 doi: 10.1007/s10853-013-7840-5
[39]	Renukappa R N M, Chikkakuntappa R and Kunigal N S 2011 Polym. Eng. Sci. 51 1827 doi: 10.1002/pen.21974
[40]	Wu H J, Qu S H, Lin K J, Qing Y C, Wang L D, Fan Y C, Fu Q H and Zhang F L 2018 Powder Technol. 333 153 doi: 10.1016/j.powtec.2018.04.015
[41]	Yu Y K, Qu S H, Zang D Y, Wang L D and Wu H J 2018 Nanoscale Res. Lett. 13 50 doi: 10.1186/s11671-018-2467-8
[42]	Wu H J, Wu G L, Ren Y Y, Yang L, Wang L D and Li X H 2015 J. Mater. Chem. C 3 7677 doi: 10.1039/C5TC01716E
[43]	Wu H, Wang L, Wu H J and Lian Q 2014 Appl. Phys. A 115 1299 doi: 10.1007/s00339-013-7988-5
[44]	Guo S L, Wang L D, Wang Y, Wu H J and Shen Z Y 2013 Chin. Phys. B 22 044101 doi: 10.1088/1674-1056/22/4/044101
[45]	Wu H J, Wang L D, Guo S L and Shen Z Y 2012 Appl. Phys. A 108 439 doi: 10.1007/s00339-012-6906-6
[46]	Mohamed A T 2015 Adv. Electr. Electron. Eng. 13 182
[47]	Mohamed A T 2015 Int. J. Electr. Power Energy Syst. 64 469 doi: 10.1016/j.ijepes.2014.06.075
[48]	Dou X Y, Zhou Q, Chen X H, Tan Y Q, He X, Lu P, Sui K Y, Tang B Z, Zhang Y M and Yuan W Z 2018 Biomacromolecules 19 2014 doi: 10.1021/acs.biomac.8b00123
[49]	Wu G L, Cheng Y H, Wang Z D, Wang K K and Feng A L 2017 J. Mater. Sci.:Mater. Electron. 28 576 doi: 10.1007/s10854-016-5560-8
[50]	Nelson J K and Fothergill J C 2004 Nanotechnology 15 586 doi: 10.1088/0957-4484/15/5/032
[51]	Li S T, Zhong L S, Li J Y and Chen G 2010 IEEE Electr. Insul. Mag. 26 14
[52]	Wu G L, Wang Y Q, Wang K K and Feng A L 2016 RSC Adv. 6 102542 doi: 10.1039/C6RA22794E
[53]	Huang X Y, Iizuka T, Jiang P K, Ohki Y and Tanaka T 2012 J. Phys. Chem. C 116 13629 doi: 10.1021/jp3026545
[54]	Helal E, David E, Fréchette M and Demarquette N R 2017 Eur. Polym. J. 94 68 doi: 10.1016/j.eurpolymj.2017.06.038
[55]	Fang J F, Shi L Y, Zhang D S, Zhong Q D and Chen Y 2010 Polym. Eng. Sci. 50 1809 doi: 10.1002/pen.21705
[56]	Ray S S and Okamoto M 2003 Prog. Ploym. Sci. 28 1539 doi: 10.1016/j.progpolymsci.2003.08.002
[57]	Park S J, Seo D I and Lee J R 2002 J. Colloid Interf. Sci. 251 160 doi: 10.1006/jcis.2002.8379

Effects of filler loading and surface modification on electrical and thermal properties of epoxy/montmorillonite composite

Effects of filler loading and surface modification on electrical and thermal properties of epoxy/montmorillonite composite

RichHTML

PDF (PC)

赞

可视化

摘要/Abstract

引用本文

使用本文

参考文献 57

相关文章 15

Metrics

本文评价

推荐阅读 0

[1]	Xue Wang(王雪), Shi-Xie Jiang, Lin Huang(黄林), Zi-Hui Chi(迟子惠), Dan Wu(吴丹), and Hua-Bei Jiang. Wideband frequency-dependent dielectric properties of rat tissues exposed to low-intensity focused ultrasound in the microwave frequency range[J]. 中国物理B, 2023, 32(3): 34305-034305.
[2]	Shuai Han(韩帅), Shuai Duan(段帅), Yun-Xian Liu(刘云仙), Chao Wang(王超), Xin Chen(陈欣), Hai-Rui Sun(孙海瑞), and Xiao-Bing Liu(刘晓兵). Pressure-induced stable structures and physical properties of Sr-Ge system[J]. 中国物理B, 2023, 32(1): 16101-016101.
[3]	Zhuang-Zhuang Zhao(赵壮壮), Meng Xun(荀孟), Guan-Zhong Pan(潘冠中), Yun Sun(孙昀), Jing-Tao Zhou(周静涛), and De-Xin Wu(吴德馨). Improved thermal property of strained InGaAlAs/AlGaAs quantum wells for 808-nm vertical cavity surface emitting lasers[J]. 中国物理B, 2022, 31(3): 34208-034208.
[4]	刘圆圆, 程建平, 庞盼, 廖斌, 吴彬, 英敏菊, 张丰收, 陈琳, 吕沙沙, 刘言东, 孙天希. Developing cold-resistant high-adhesive electronic substrate for WIMPs detectors at CDEX[J]. 中国物理B, 2020, 29(4): 45203-045203.
[5]	徐德刚, 朱先立, 王与烨, 李吉宁, 贺奕俽, 庞子博, 程红娟, 姚建铨. Optical-induced dielectric tunability properties of DAST crystal in THz range[J]. 中国物理B, 2019, 28(12): 127701-127701.
[6]	周子聪, 王延颋. Thermal properties of a two-dimensional intrinsically curved semiflexible biopolymer[J]. 中国物理B, 2017, 26(3): 38701-038701.
[7]	邱建华, 陈智慧, 王秀琴, 袁宁一, 丁建宁. Dielectric and piezoelectric properties of (110) oriented Pb(Zr_1-xTi_x)O₃ thin films[J]. 中国物理B, 2016, 25(5): 57701-057701.
[8]	周仁武, 周儒森, 庄金星, 李江炜, 陈茂冬, 张先徽, 刘东平, , 杨思泽. Surface diffuse discharge mechanism of well-aligned atmospheric pressure microplasma arrays[J]. 中国物理B, 2016, 25(4): 45202-045202.
[9]	宋荟荟, 周万城, 罗发, 卿玉长, 陈马林. Microwave dielectric properties of Nextel-440 fiber fabrics with pyrolytic carbon coatings in the temperature range from room temperature to 700 ℃[J]. 中国物理B, 2015, 24(8): 88107-088107.
[10]	邱建华, 王秀琴, 袁宁一, 丁建宁. Piezoelectric and electro—optic properties of tetragonal (1-x)Pb(Mg_1/3Nb_2/3)O₃—xPbTiO₃ single crystals by phenomenological theory[J]. 中国物理B, 2015, 24(7): 77701-077701.
[11]	Rajwali Khan, 方明虎. Dielectric and magnetic properties of (Zn, Co) co-doped SnO₂ nanoparticles[J]. 中国物理B, 2015, 24(12): 127803-127803.
[12]	储鑫, 余靓, 侯仰龙. Surface modification of magnetic nanoparticles in biomedicine[J]. 中国物理B, 2015, 24(1): 14704-014704.
[13]	宋育全, 周卫平, 房勇, 杨艳婷, 王辽宇, 王敦辉, 都有为. Multiferroic properties in terbium orthoferrite[J]. 中国物理B, 2014, 23(7): 77505-077505.
[14]	蔡苹, 陈洪敏, 谢晋. Composite magnetic nanoparticles：Synthesis and cancer-related applications[J]. 中国物理B, 2014, 23(11): 117504-117504.
[15]	冯松科, 李双明, 傅恒志. Probing the thermoelectric transport properties of n-type Bi₂Te₃ close to the limit of constitutional undercooling[J]. , 2014, 23(11): 117202-117202.