Temperature dependence of the photothermal laser cooling efficiency for a micro-cantilever

doi:10.1088/1674-1056/23/10/107801

中国物理B ›› 2014, Vol. 23 ›› Issue (10): 107801-107801.doi: 10.1088/1674-1056/23/10/107801

• CONDENSED MATTER: ELECTRONIC STRUCTURE, ELECTRICAL, MAGNETIC, AND OPTICAL PROPERTIES • 上一篇下一篇

Temperature dependence of the photothermal laser cooling efficiency for a micro-cantilever

丁丽萍^{a b}, 毛添华^{a b}, 付号^a, 曹更玉^a

a State Key Laboratory of Magnetic Resonance and Atomic and Molecular Physics, Wuhan Institution of Physics and Mathematics, Chinese Academy of Sciences, Wuhan 430071, China;
b University of Chinese Academy of Sciences, Beijing 100049, China

收稿日期:2014-04-04 修回日期:2014-05-30 出版日期:2014-10-15 发布日期:2014-10-15
基金资助:
Project supported by the National Basic Research Program of China (Grant No. 2012CB922101).

Temperature dependence of the photothermal laser cooling efficiency for a micro-cantilever

Ding Li-Ping (丁丽萍)^{a b}, Mao Tian-Hua (毛添华)^{a b}, Fu Hao (付号)^a, Cao Geng-Yu (曹更玉)^a

a State Key Laboratory of Magnetic Resonance and Atomic and Molecular Physics, Wuhan Institution of Physics and Mathematics, Chinese Academy of Sciences, Wuhan 430071, China;
b University of Chinese Academy of Sciences, Beijing 100049, China

Received:2014-04-04 Revised:2014-05-30 Online:2014-10-15 Published:2014-10-15
Contact: Cao Geng-Yu E-mail:gycao@wipm.ac.cn
About author:78.20.nb; 42.60.-v; 42.55.Sa
Supported by:
Project supported by the National Basic Research Program of China (Grant No. 2012CB922101).

摘要/Abstract

摘要： The relationship between the photothermal cooling efficiency of a micro-cantilever's mechanical mode and the environmental temperature is studied. The micro-cantilever and a polished fiber end form a low finesse Fabry-Perot (FP) cavity. Experimental results in a temperature range from 77 K to 298 K show that temperature has an obvious influence on photothermal cooling efficiency. The photothermal cooling efficiency, η _ph, at 100 K is 10 times that at 298 K. This accords well with the theoretical analysis that the high photothermal cooling efficiency can be achieved when photothermal response time, τ_ph, and mechanical resonant frequency, ω₀, are close to the optimal photothermal cooling condition ω₀ τ_ph=1. Our study provides an important approach for high effective photothermal cooling and high-sensitivity measurement for force microscopy.

关键词: micro-cantilever, FP cavity, photothermal cooling, temperature dependence, optomechanics

Abstract: The relationship between the photothermal cooling efficiency of a micro-cantilever's mechanical mode and the environmental temperature is studied. The micro-cantilever and a polished fiber end form a low finesse Fabry-Perot (FP) cavity. Experimental results in a temperature range from 77 K to 298 K show that temperature has an obvious influence on photothermal cooling efficiency. The photothermal cooling efficiency, η _ph, at 100 K is 10 times that at 298 K. This accords well with the theoretical analysis that the high photothermal cooling efficiency can be achieved when photothermal response time, τ_ph, and mechanical resonant frequency, ω₀, are close to the optimal photothermal cooling condition ω₀ τ_ph=1. Our study provides an important approach for high effective photothermal cooling and high-sensitivity measurement for force microscopy.

Key words: micro-cantilever, FP cavity, photothermal cooling, temperature dependence, optomechanics

中图分类号: (Photothermal effects)

78.20.nb

42.60.-v (Laser optical systems: design and operation) 42.55.Sa (Microcavity and microdisk lasers)

丁丽萍, 毛添华, 付号, 曹更玉. Temperature dependence of the photothermal laser cooling efficiency for a micro-cantilever[J]. 中国物理B, 2014, 23(10): 107801-107801.

Ding Li-Ping (丁丽萍), Mao Tian-Hua (毛添华), Fu Hao (付号), Cao Geng-Yu (曹更玉). Temperature dependence of the photothermal laser cooling efficiency for a micro-cantilever[J]. Chin. Phys. B, 2014, 23(10): 107801-107801.

参考文献 0


[1]	Liu Y C, Hu Y W, Wong C W and Xiao Y F 2013 Chin. Phys. B 22 114213

[2]	Arcizet O, Cohadon P F, Briant T, Pinard M and Heidmann A 2006 Nature 444 71 doi: 10.1038/nature05244

[3]	Dantan A, Genes C, Vitali D and Pinard M 2008 Phys. Rev. A 77 011804 doi: 10.1103/PhysRevA.77.011804

[4]	Gigan S, Böhm H R, Paternostro M, Blaser F, Langer G, Hertzberg J B, Schwab K C, Bäuerle D, Aspelmeyer M and Zeilinger A 2006 Nature 444 67 doi: 10.1038/nature05273

[5]	Corbitt T, Ottaway D, Innerhofer E, Pelc J and Mavalvala N 2006 Phys. Rev. A 74 021802 doi: 10.1103/PhysRevA.74.021802

[6]	Chen H J and Mi X W 2011 Chin. Phys. B 20 124203

[7]	Schliesser A, Del'Haye P, Nooshi N, Vahala K J and Kippenberg T J 2006 Phys. Rev. Lett. 97 243905 doi: 10.1103/PhysRevLett.97.243905

[8]	Jourdan G, Comin F and Chevrier J 2008 Phys. Rev. Lett. 101 133904 doi: 10.1103/PhysRevLett.101.133904

[9]	Metzger C H, Ludwig M, Neuenhahn C, Ortlieb A, Favero I, Karrai K and Marquardt F 2008 Phys. Rev. Lett. 101 133903 doi: 10.1103/PhysRevLett.101.133903

[10]	Fu H, Liu Y, Chen J and Cao G Y 2010 Sens. Actuators A 163 533 doi: 10.1016/j.sna.2010.08.032

[11]	Barton R A, Storch I R, Adiga V P, Sakakibara R, Cipriany B R, Ilic B, Wang S P, Peijie Ong, McEuen P L, Parpia J M and Craighead H G 2012 Nano Lett. 12 4681 doi: 10.1021/nl302036x

[12]	Metzger C H and Karrai K 2004 Nature 432 1002 doi: 10.1038/nature03118

[13]	Liberato S D, Lambert N and Nori F 2011 Phys. Rev. A 83 033809 doi: 10.1103/PhysRevA.83.033809

[14]	Dang H B, Maloof A C and Romalis M V 2010 Appl. Phys. Lett. 97 151110 doi: 10.1063/1.3491215

[15]	Schliesser A, Arcizet O, Rivi'ere R, Anetsberger G and Kippenberg T J 2009 Nat. Phys. 5 509 doi: 10.1038/nphys1304

[16]	Sadewasser S, Jelinek P, Fang C K, Custance O, Yamada Y, Sugimoto Y, Abe M and Morita S 2009 Phys. Rev. Lett. 103 266103 doi: 10.1103/PhysRevLett.103.266103

[17]	Fu H, Liu C D, Liu Y, Chu J R and Cao G Y 2012 Opt. Lett. 37 584 doi: 10.1364/OL.37.000584

[18]	Vogel M, Mooser C and Karrai K 2003 Appl. Phys. Lett. 83 1337 doi: 10.1063/1.1600513

[19]	Venstra W J, Westra H J R and van der Zant H S J 2010 Appl. Phys. Lett. 97 193107 doi: 10.1063/1.3511343

[20]	Liu Y, Kong W, Zhang T L, Zhao G and Chu J R 2010 5th IEEE International Conference on Nano/Micro Engineered and Molecular Systems, January 20-23, Xiamen, China, p. 633

[21]	Datskos P G and Sauers I 1999 Sens. Actuators B: Chemical 61 75 doi: 10.1016/S0925-4005(99)00251-8

[22]	Serrano J R, Phinneya L M and Rogers J W 2009 Int. J. Heat Mass Transfer 52 2255 doi: 10.1016/j.ijheatmasstransfer.2008.12.003

[23]	Abdi M and Bahrampour A R 2012 Phys. Rev. A 85 063839 doi: 10.1103/PhysRevA.85.063839

[24]	Metzger C H, Favero I, Ortlieb A and Karrai K 2008 Phys. Rev. B 78 035309 doi: 10.1103/PhysRevB.78.035309

[25]	Barnes J R, Stephenson R J, Woodburn C N, O'Shea S J, Welland M E, Rayment T, Gimzewski J K and Gerber Ch 1994 Rev. Sci. Instrum. 65 3793 doi: 10.1063/1.1144509

Temperature dependence of the photothermal laser cooling efficiency for a micro-cantilever

Temperature dependence of the photothermal laser cooling efficiency for a micro-cantilever

PDF (PC)

赞

可视化

摘要/Abstract

引用本文

使用本文

参考文献 0

相关文章 15

Metrics

本文评价

推荐阅读 0

[1]	Yao Li(李耀), Chuang Li(李闯), Jiandong Zhang(张建东),Ying Dong(董莹), and Huizhu Hu(胡慧珠). Tunable phonon-atom interaction in a hybrid optomechanical system[J]. 中国物理B, 2023, 32(4): 44213-044213.
[2]	Ying-Ze Wang(王颖泽), Xiao-Yu Lu(陆晓宇), and Dong Liu(刘栋). Heat transport properties within living biological tissues with temperature-dependent thermal properties[J]. 中国物理B, 2023, 32(1): 14401-014401.
[3]	Ji-Hui Zheng(郑继会), Rui Peng(彭蕊), Jiong Cheng(程泂), Jing An(安静), and Wen-Zhao Zhang(张闻钊). Nonlocal nonreciprocal optomechanical circulator[J]. 中国物理B, 2022, 31(5): 54204-054204.
[4]	Lijun Ni(倪丽君), Wenqiang Wang(王文强), Lichuan Jin(金立川), Jiandong Ye(叶建东), Hehe Gong(巩贺贺), Xiang Zhan(战翔), Zhendong Chen(陈振东), Longlong Zhang(张龙龙), Xingze Dai(代兴泽), Yao Li(黎遥), Rong Zhang(张荣), Yi Yang(杨燚), Huaiwu Zhang(张怀武), Ronghua Liu(刘荣华), Lina Chen(陈丽娜), and Yongbing Xu(徐永兵). Temperature dependence of spin pumping in YIG/NiO_x/W multilayer[J]. 中国物理B, 2022, 31(12): 128504-128504.
[5]	Tian-Le Yang(杨天乐), Chen-Long Zhu(朱陈龙), Sheng Liu(刘声), and Ye-Jun Xu(许业军). Enhancing stationary entanglement between two optomechanical oscillators by Coulomb interaction with Kerr medium[J]. 中国物理B, 2021, 30(12): 124201-124201.
[6]	陈孝章, 顾乐华, 刘岚, 陈华威, 栗敬俣, 刘春森, 周鹏. Temperature-switching logic in MoS₂ single transistors[J]. 中国物理B, 2020, 29(9): 97201-097201.
[7]	黄乃兴, 孙恩伟, 张锐, 杨彬, 刘俭, 吕天全, 曹文武. Temperature dependence of mode coupling effect in piezoelectric vibrator made of [001]_c-poled Mn-doped 0.24PIN-0.46PMN-0.30PT ternary single crystals with high electromechanical coupling factor[J]. 中国物理B, 2020, 29(7): 75201-075201.
[8]	周康敏, 缪巍, 耿悦, Yan Delorme, 张文, 任远, 张坤, 史生才. Noise temperature distribution of superconducting hot electron bolometer mixers[J]. 中国物理B, 2020, 29(5): 58505-058505.
[9]	Mohamed Amazioug, Larbi Jebli, Mostafa Nassik, Nabil Habiballah. Quantifying non-classical correlations under thermal effects in a double cavity optomechanical system[J]. 中国物理B, 2020, 29(2): 20304-020304.
[10]	Kamran Ullah. Electro-optomechanical switch via tunable bistability and four-wave mixing[J]. 中国物理B, 2019, 28(11): 114209-114209.
[11]	王一平, 张筑城, 於亚飞, 张智明. Effects of the Casimir force on the properties of a hybrid optomechanical system[J]. 中国物理B, 2019, 28(1): 14202-014202.
[12]	李凯, Sankar Davuluri, 李勇. Three-mode optomechanical system for angular velocity detection[J]. 中国物理B, 2018, 27(8): 84203-084203.
[13]	张俊, 穆青霞, 张闻钊. Controlling the entanglement of mechanical oscillators in composite optomechanical system[J]. 中国物理B, 2018, 27(4): 40304-040304.
[14]	魏晚迎, 於亚飞, 张智明. Multi-window transparency and fast-slow light switching in a quadratically coupled optomechanical system assisted with three-level atoms[J]. 中国物理B, 2018, 27(3): 34204-034204.
[15]	杨冠卿, 张世著, 徐波, 陈涌海, 王占国. Anomalous temperature dependence of photoluminescence spectra from InAs/GaAs quantum dots grown by formation-dissolution-regrowth method[J]. 中国物理B, 2017, 26(6): 68103-068103.