中国物理B ›› 2013, Vol. 22 ›› Issue (10): 100702-100702.doi: 10.1088/1674-1056/22/10/100702

• GENERAL • 上一篇    下一篇

Multi-rate sensor fusion-based adaptive discrete finite-time synergetic control for flexible-joint mechanical systems

薛广月, 任雪梅, 夏元清   

  1. School of Automation, Beijing Institute of Technology, Beijing 100081, China
  • 收稿日期:2013-02-05 修回日期:2013-04-08 出版日期:2013-08-30 发布日期:2013-08-30
  • 基金资助:
    Project supported by the National Natural Science Foundation of China (Grant Nos. 61273150 and 60974046) and the Research Fund for the Doctoral Program of Higher Education of China (Grant No. 20121101110029).

Multi-rate sensor fusion-based adaptive discrete finite-time synergetic control for flexible-joint mechanical systems

Xue Guang-Yue (薛广月), Ren Xue-Mei (任雪梅), Xia Yuan-Qing (夏元清)   

  1. School of Automation, Beijing Institute of Technology, Beijing 100081, China
  • Received:2013-02-05 Revised:2013-04-08 Online:2013-08-30 Published:2013-08-30
  • Contact: Xue Guang-Yue, Ren Xue-Mei E-mail:yyyy0225@126.com;xmren@bit.edu.cn
  • Supported by:
    Project supported by the National Natural Science Foundation of China (Grant Nos. 61273150 and 60974046) and the Research Fund for the Doctoral Program of Higher Education of China (Grant No. 20121101110029).

摘要: This paper proposes an adaptive discrete finite-time synergetic control (ADFTSC) scheme based on a multi-rate sensor fusion estimator for flexible-joint mechanical systems in the presence of unmeasured states and dynamic uncertainties. Multi-rate sensors are employed to observe the system states which cannot be directly obtained by encoders due to the existence of joint flexibilities. By using an extended Kalman filter (EKF), the finite-time synergetic controller is designed based on a sensor fusion estimator which estimates states and parameters of the mechanical system with multi-rate measurements. The proposed controller can guarantee the finite-time convergence of tracking errors by the theoretical derivation. Simulation and experimental studies are included to validate the effectiveness of the proposed approach.

关键词: adaptive finite-time synergetic control, multi-rate sensor fusion, mechanical systems

Abstract: This paper proposes an adaptive discrete finite-time synergetic control (ADFTSC) scheme based on a multi-rate sensor fusion estimator for flexible-joint mechanical systems in the presence of unmeasured states and dynamic uncertainties. Multi-rate sensors are employed to observe the system states which cannot be directly obtained by encoders due to the existence of joint flexibilities. By using an extended Kalman filter (EKF), the finite-time synergetic controller is designed based on a sensor fusion estimator which estimates states and parameters of the mechanical system with multi-rate measurements. The proposed controller can guarantee the finite-time convergence of tracking errors by the theoretical derivation. Simulation and experimental studies are included to validate the effectiveness of the proposed approach.

Key words: adaptive finite-time synergetic control, multi-rate sensor fusion, mechanical systems

中图分类号:  (Servo and control equipment; robots)

  • 07.07.Tw
07.10.-h (Mechanical instruments and equipment) 02.30.Yy (Control theory)