中国物理B ›› 1993, Vol. 2 ›› Issue (9): 671-677.doi: 10.1088/1004-423X/2/9/005

• • 上一篇    下一篇

Ge BEAM TREATMENT OF Si SUBSTRATE FOR MOLECULAR BEAM EPITAXY

崔堑, 卢学坤, 卫星, 杨小平, 龚大卫, 吕宏强, 盛篪, 张翔九, 王迅   

  1. Surface Physics Laboratory, Fudan University, Shanghai 200433, China
  • 收稿日期:1992-12-08 出版日期:1993-09-20 发布日期:1993-09-20

Ge BEAM TREATMENT OF Si SUBSTRATE FOR MOLECULAR BEAM EPITAXY

CUI QIAN (崔堑), LU XUE-KUN (卢学坤), WEI XING (卫星), YANG XIAO-PING (杨小平), GONG DA-WEI (龚大卫), Lü HONG-QIANG (吕宏强), SHENG CHI (盛篪), ZHANG XIANG-JIU (张翔九), WANG XUN (王迅)   

  1. Surface Physics Laboratory, Fudan University, Shanghai 200433, China
  • Received:1992-12-08 Online:1993-09-20 Published:1993-09-20

PDF (PC)

351

赞

摘要： A new surface cleaning method for Si MBE is described in which a very weak Ge beam flux is deposited on the surface for removing the thin passivative layer of SiO2 on the Si subetrate. It has proved that the SiO2 will react with Ge at a relatively low temperature (620℃), and as a result, the oxide layer becomes volatile. Here the high temperature annealing in the conventional Shiraki method is no longer required, and since the oxide layer is removed in ultra high vacuum, only very little carbon contamination may occur. Furthermore, to reduce the excessive Ge on the substrate surface, Ge is deposited at 620℃ and then the sample is annealed at 700℃; the residual Ge atoms on Si substrate can be reduced to less than 0.1 monolay-er (ML). Ge beam treatment turns out to be an effective low-temperature Si surface-cleaning method, especially for the heteroepitaxial growth of GexSi1-x/Si.

Abstract: A new surface cleaning method for Si MBE is described in which a very weak Ge beam flux is deposited on the surface for removing the thin passivative layer of SiO2 on the Si subetrate. It has proved that the SiO2 will react with Ge at a relatively low temperature (620℃), and as a result, the oxide layer becomes volatile. Here the high temperature annealing in the conventional Shiraki method is no longer required, and since the oxide layer is removed in ultra high vacuum, only very little carbon contamination may occur. Furthermore, to reduce the excessive Ge on the substrate surface, Ge is deposited at 620℃ and then the sample is annealed at 700℃; the residual Ge atoms on Si substrate can be reduced to less than 0.1 monolay-er (ML). Ge beam treatment turns out to be an effective low-temperature Si surface-cleaning method, especially for the heteroepitaxial growth of GexSi1-x/Si.

中图分类号:  (Surface cleaning, etching, patterning)

  • 81.65.Cf
68.47.Fg (Semiconductor surfaces) 81.15.Hi (Molecular, atomic, ion, and chemical beam epitaxy) 81.65.Rv (Passivation) 81.40.Ef (Cold working, work hardening; annealing, post-deformation annealing, quenching, tempering recovery, and crystallization)