中国物理B ›› 2023, Vol. 32 ›› Issue (3): 34208-034208.doi: 10.1088/1674-1056/ac785e

• • 上一篇    下一篇

Numerical simulation of a truncated cladding negative curvature fiber sensor based on the surface plasmon resonance effect

Zhichao Zhang(张志超)1, Jinhui Yuan(苑金辉)1,2,†, Shi Qiu(邱石)1, Guiyao Zhou(周桂耀)3, Xian Zhou(周娴)2, Binbin Yan(颜玢玢)1, Qiang Wu(吴强)4,5,‡, Kuiru Wang(王葵如)1, and Xinzhu Sang(桑新柱)1   

  1. 1 State Key Laboratory of Information Photonics and Optical Communications, Beijing University of Posts and Telecommunications, Beijing 100876, China;
    2 Research Center for Convergence Networks and Ubiquitous Services, University of Science&Technology Beijing, Beijing 100083, China;
    3 Guangzhou Key Laboratory for Special Fiber Photonic Devices, South China Normal University, Guangzhou 510006, China;
    4 Department of Physics and Electrical Engineering, Northumbria University, Newcastle upon Tyne, NE1 8ST, United Kingdom;
    5 Key Laboratory of Nondestructive Test(Ministry of Education), Nanchang Hong Kong University, Nanchang 330063, China
  • 收稿日期:2022-02-23 修回日期:2022-05-15 接受日期:2022-06-14 出版日期:2023-02-14 发布日期:2023-03-01
  • 通讯作者: Jinhui Yuan, Qiang Wu E-mail:yuanjinhui81@bupt.edu.cn;qiang.wu@northumbria.ac.uk
  • 基金资助:
    Project supported by the National Natural Science Foundation of China (Grant No. 61935007).

Numerical simulation of a truncated cladding negative curvature fiber sensor based on the surface plasmon resonance effect

Zhichao Zhang(张志超)1, Jinhui Yuan(苑金辉)1,2,†, Shi Qiu(邱石)1, Guiyao Zhou(周桂耀)3, Xian Zhou(周娴)2, Binbin Yan(颜玢玢)1, Qiang Wu(吴强)4,5,‡, Kuiru Wang(王葵如)1, and Xinzhu Sang(桑新柱)1   

  1. 1 State Key Laboratory of Information Photonics and Optical Communications, Beijing University of Posts and Telecommunications, Beijing 100876, China;
    2 Research Center for Convergence Networks and Ubiquitous Services, University of Science&Technology Beijing, Beijing 100083, China;
    3 Guangzhou Key Laboratory for Special Fiber Photonic Devices, South China Normal University, Guangzhou 510006, China;
    4 Department of Physics and Electrical Engineering, Northumbria University, Newcastle upon Tyne, NE1 8ST, United Kingdom;
    5 Key Laboratory of Nondestructive Test(Ministry of Education), Nanchang Hong Kong University, Nanchang 330063, China
  • Received:2022-02-23 Revised:2022-05-15 Accepted:2022-06-14 Online:2023-02-14 Published:2023-03-01
  • Contact: Jinhui Yuan, Qiang Wu E-mail:yuanjinhui81@bupt.edu.cn;qiang.wu@northumbria.ac.uk
  • Supported by:
    Project supported by the National Natural Science Foundation of China (Grant No. 61935007).

RichHTML

0

PDF (PC)

69

赞

摘要： A refractive index (RI) sensor based on the surface plasmon resonance effect is proposed using a truncated cladding negative curvature fiber (TC-NCF). The influences of the TC-NCF structure parameters on the sensing performances are investigated and compared with the traditional NCF. The simulation results show that the proposed TC-NCF RI sensor has an ultra-wide detection range from 1.16 to 1.43. The maximum wavelength sensitivity reaches 12400 nm/RIU, and the corresponding R2 of the polynomial fitting equation is 0.9999. The maximum and minimum resolutions are 2.56×10-5 and 8.06×10-6, respectively. In addition, the maximum amplitude sensitivity can reach -379.1 RIU-1 when the RI is chosen as 1.43. The proposed TC-NCF RI sensor could be useful in biochemical medicine, environmental monitoring, and food safety.

关键词: truncated cladding negative curvature fiber, refractive index sensor, surface plasmon resonance

Abstract: A refractive index (RI) sensor based on the surface plasmon resonance effect is proposed using a truncated cladding negative curvature fiber (TC-NCF). The influences of the TC-NCF structure parameters on the sensing performances are investigated and compared with the traditional NCF. The simulation results show that the proposed TC-NCF RI sensor has an ultra-wide detection range from 1.16 to 1.43. The maximum wavelength sensitivity reaches 12400 nm/RIU, and the corresponding R2 of the polynomial fitting equation is 0.9999. The maximum and minimum resolutions are 2.56×10-5 and 8.06×10-6, respectively. In addition, the maximum amplitude sensitivity can reach -379.1 RIU-1 when the RI is chosen as 1.43. The proposed TC-NCF RI sensor could be useful in biochemical medicine, environmental monitoring, and food safety.

Key words: truncated cladding negative curvature fiber, refractive index sensor, surface plasmon resonance

中图分类号:  (Sensors, gyros)

  • 42.81.Pa