中国物理B ›› 2019, Vol. 28 ›› Issue (12): 124202-124202.doi: 10.1088/1674-1056/ab4d48

• ELECTROMAGNETISM, OPTICS, ACOUSTICS, HEAT TRANSFER, CLASSICAL MECHANICS, AND FLUID DYNAMICS • 上一篇    下一篇

Design and optimization of microstructure optical fiber sensor based on bimetal plasmon mode interaction

Meng Wu(吴萌), Xin-Yu Liu(刘欣宇), Gui-Yao Zhou(周桂耀), Chang-Ming Xia(夏长明), Bo-Yao Li(李波瑶), Zhi-Yun Hou(侯峙云)   

  1. 1 Guangzhou Key Laboratory for Special Fiber Photonic Devices, South China Normal University(SCNU), Guangzhou 510006, China;
    2 Guangdong Province Key Laboratory of Nano-photonic Functional Materials and Devices, South China Normal University, Guangzhou 510006, China;
    3 Guangdong Provincial Engineering Technology Research Center for Microstructured Functional Fibers and Devices, South China Normal University, Guangzhou 510006, China
  • 收稿日期:2019-07-12 修回日期:2019-09-10 出版日期:2019-12-05 发布日期:2019-12-05
  • 通讯作者: Zhi-Yun Hou E-mail:houzhiyun@163.com
  • 基金资助:
    Project supported by the National Natural Science Foundation of China (Grant Nos. 61575066, 61527822, and 61735005), the Natural Science Foundation of Guangdong Province, China (Grant No. 2017A030313333), the Science and Technology Program of Guangzhou City, China (Grant No. 201707010133), the Science and Technology Planning Project of Guangdong Province, China (Grant No. 2017KZ010201), the GDUPS (2017), the Innovation Project of Graduate School of South China Normal University (Grant No. 2018LKXM040), and the SCNU Study Abroad Program for Elite Postgraduate Students, China.

Design and optimization of microstructure optical fiber sensor based on bimetal plasmon mode interaction

Meng Wu(吴萌)1,2,3, Xin-Yu Liu(刘欣宇)1,2,3, Gui-Yao Zhou(周桂耀)1,2,3, Chang-Ming Xia(夏长明)1,2,3, Bo-Yao Li(李波瑶)1,2,3, Zhi-Yun Hou(侯峙云)1,2,3   

  1. 1 Guangzhou Key Laboratory for Special Fiber Photonic Devices, South China Normal University(SCNU), Guangzhou 510006, China;
    2 Guangdong Province Key Laboratory of Nano-photonic Functional Materials and Devices, South China Normal University, Guangzhou 510006, China;
    3 Guangdong Provincial Engineering Technology Research Center for Microstructured Functional Fibers and Devices, South China Normal University, Guangzhou 510006, China
  • Received:2019-07-12 Revised:2019-09-10 Online:2019-12-05 Published:2019-12-05
  • Contact: Zhi-Yun Hou E-mail:houzhiyun@163.com
  • Supported by:
    Project supported by the National Natural Science Foundation of China (Grant Nos. 61575066, 61527822, and 61735005), the Natural Science Foundation of Guangdong Province, China (Grant No. 2017A030313333), the Science and Technology Program of Guangzhou City, China (Grant No. 201707010133), the Science and Technology Planning Project of Guangdong Province, China (Grant No. 2017KZ010201), the GDUPS (2017), the Innovation Project of Graduate School of South China Normal University (Grant No. 2018LKXM040), and the SCNU Study Abroad Program for Elite Postgraduate Students, China.

摘要: A surface plasmon resonance (SPR) sensor with two orthogonal open loops based on microstructured optical fibers (MOFs) is introduced. The interaction between core mode and surface plasmon polariton (SPP) mode produced by two different metal films is studied. Full vector finite element method is used to analyze the coupling and sensing characteristics. The results show that there are three loss peaks near the Au/Ag film, and multi-peak calibration is achieved. Because of the positive and negative sensitivity of the amplitude, the sensor has strong anti-interference capability when the external environment changes. The sensor can detect the refractive index between 1.37 and 1.40, and the working wavelength is between 1600 nm and 2400 nm. Because the sensor has some excellent characteristics, it can be used in biochemical sensing, environmental detection, and other related fields.

关键词: surface plasma, biosensor, multi-component detection, photonic crystal fiber

Abstract: A surface plasmon resonance (SPR) sensor with two orthogonal open loops based on microstructured optical fibers (MOFs) is introduced. The interaction between core mode and surface plasmon polariton (SPP) mode produced by two different metal films is studied. Full vector finite element method is used to analyze the coupling and sensing characteristics. The results show that there are three loss peaks near the Au/Ag film, and multi-peak calibration is achieved. Because of the positive and negative sensitivity of the amplitude, the sensor has strong anti-interference capability when the external environment changes. The sensor can detect the refractive index between 1.37 and 1.40, and the working wavelength is between 1600 nm and 2400 nm. Because the sensor has some excellent characteristics, it can be used in biochemical sensing, environmental detection, and other related fields.

Key words: surface plasma, biosensor, multi-component detection, photonic crystal fiber

中图分类号:  (Fiber testing and measurement of fiber parameters)

  • 42.81.Cn
87.85.fk (Biosensors) 71.45.Gm (Exchange, correlation, dielectric and magnetic response functions, plasmons)