中国物理B ›› 2013, Vol. 22 ›› Issue (11): 117504-117504.doi: 10.1088/1674-1056/22/11/117504

所属专题: TOPICAL REVIEW — Magnetism, magnetic materials, and interdisciplinary research

• SPECIAL TOPIC --- Non-equilibrium phenomena in soft matters • 上一篇    下一篇

Development and application of ferrite materials for low temperature co-fired ceramic technology

张怀武, 李颉, 苏桦, 周廷川, 龙洋, 郑宗良   

  1. State Key Laboratory of Electronic Thin Films and Integrated Devices, University of Electronic Science and Technology of China, Chengdu 610054, China
  • 收稿日期:2013-08-09 出版日期:2013-09-28 发布日期:2013-09-28
  • 基金资助:
    Project supported by the National Basic Research Program of China (Grant No. 2012CB933100), the National Natural Science Foundation of China (Grant Nos. 51132003, 61021061, and 61171047), and the Second Item of Strongpoint Industry of Guangdong Province, China (Grant No. 2012A090100001).

Development and application of ferrite materials for low temperature co-fired ceramic technology

Zhang Huai-Wu (张怀武), Li Jie (李颉), Su Hua (苏桦), Zhou Ting-Chuan (周廷川), Long Yang (龙洋), Zheng Zong-Liang (郑宗良)   

  1. State Key Laboratory of Electronic Thin Films and Integrated Devices, University of Electronic Science and Technology of China, Chengdu 610054, China
  • Received:2013-08-09 Online:2013-09-28 Published:2013-09-28
  • Contact: Zhang Huai-Wu, Su Hua E-mail:hwzhang@uestc.edu.cn;uestcsh@163.com
  • Supported by:
    Project supported by the National Basic Research Program of China (Grant No. 2012CB933100), the National Natural Science Foundation of China (Grant Nos. 51132003, 61021061, and 61171047), and the Second Item of Strongpoint Industry of Guangdong Province, China (Grant No. 2012A090100001).

摘要: Development and application of ferrite materials for low temperature co-fired ceramic (LTCC) technology are discussed, specifically addressing several typical ferrite materials such as M-type barium ferrite, NiCuZn ferrite, YIG ferrite, and lithium ferrite. In order to permit co-firing with a silver internal electrode in LTCC process, the sintering temperature of ferrite materials should be less than 950 ℃. These ferrite materials are research focuses and are applied in many ways in electronics.

关键词: ferrite materials, low temperature co-fired ceramic technology

Abstract: Development and application of ferrite materials for low temperature co-fired ceramic (LTCC) technology are discussed, specifically addressing several typical ferrite materials such as M-type barium ferrite, NiCuZn ferrite, YIG ferrite, and lithium ferrite. In order to permit co-firing with a silver internal electrode in LTCC process, the sintering temperature of ferrite materials should be less than 950 ℃. These ferrite materials are research focuses and are applied in many ways in electronics.

Key words: ferrite materials, low temperature co-fired ceramic technology

中图分类号:  (Magnetic properties of nanostructures)

  • 75.75.-c
75.50.-y (Studies of specific magnetic materials) 75.70.Cn (Magnetic properties of interfaces (multilayers, superlattices, heterostructures))