中国物理B ›› 2018, Vol. 27 ›› Issue (1): 14101-014101.doi: 10.1088/1674-1056/27/1/014101

• ELECTROMAGNETISM, OPTICS, ACOUSTICS, HEAT TRANSFER, CLASSICAL MECHANICS, AND FLUID DYNAMICS • 上一篇    下一篇

A broadband cross-polarization conversion anisotropic metasurface based on multiple plasmon resonances

M Ismail Khan, Farooq A Tahir   

  1. 1 Research Institute for Microwave and Millimeter-wave Studies(RIMMS), National University of Sciences and Technology(NUST), Islamabad, Pakistan;
    2 Department of Electrical Engineering, COMSATS Institute of Information Technology, Attock Campus, Pakistan
  • 收稿日期:2017-05-30 修回日期:2017-07-25 出版日期:2018-01-05 发布日期:2018-01-05
  • 通讯作者: Farooq A Tahir E-mail:farooq.tahir@seecs.edu.pk

A broadband cross-polarization conversion anisotropic metasurface based on multiple plasmon resonances

M Ismail Khan1,2, Farooq A Tahir1   

  1. 1 Research Institute for Microwave and Millimeter-wave Studies(RIMMS), National University of Sciences and Technology(NUST), Islamabad, Pakistan;
    2 Department of Electrical Engineering, COMSATS Institute of Information Technology, Attock Campus, Pakistan
  • Received:2017-05-30 Revised:2017-07-25 Online:2018-01-05 Published:2018-01-05
  • Contact: Farooq A Tahir E-mail:farooq.tahir@seecs.edu.pk

RichHTML

0

PDF (PC)

752

赞

摘要： A compact broadband cross-polarization conversion metasurface functioning in the microwave regime is realized and experimentally demonstrated. The metasurface consists of a two-dimensional periodic arrangement of anisotropic double-slit split-ring-resonator-based unit cells printed on top of a dielectric substrate, backed by metallic cladding. The proposed metasurface converts an x-or y-polarized wave into its orthogonal polarization over a fractional bandwidth of 100% from 5-15 GHz, both for normal as well as oblique incidence. Moreover, the sub-wavelength unit-cell size, thin dielectric substrate, and unique unit-cell design collectively make the response of the metasurface same for both polarizations and insensitive to the incidence angle. The designed structure is fabricated and tested. The measurement and simulation results are found to be consistent with each other.

关键词: cross-polarization conversion, anisotropy, metasurface, plasmon resonances

Abstract: A compact broadband cross-polarization conversion metasurface functioning in the microwave regime is realized and experimentally demonstrated. The metasurface consists of a two-dimensional periodic arrangement of anisotropic double-slit split-ring-resonator-based unit cells printed on top of a dielectric substrate, backed by metallic cladding. The proposed metasurface converts an x-or y-polarized wave into its orthogonal polarization over a fractional bandwidth of 100% from 5-15 GHz, both for normal as well as oblique incidence. Moreover, the sub-wavelength unit-cell size, thin dielectric substrate, and unique unit-cell design collectively make the response of the metasurface same for both polarizations and insensitive to the incidence angle. The designed structure is fabricated and tested. The measurement and simulation results are found to be consistent with each other.

Key words: cross-polarization conversion, anisotropy, metasurface, plasmon resonances

中图分类号:  (Electromagnetic wave propagation; radiowave propagation)

  • 41.20.Jb