Dye-sensitized solar cell module realized photovoltaic and photothermal highly efficient conversion via three-dimensional printing technology

doi:10.1088/1674-1056/26/3/038401

中国物理B ›› 2017, Vol. 26 ›› Issue (3): 38401-038401.doi: 10.1088/1674-1056/26/3/038401

• INTERDISCIPLINARY PHYSICS AND RELATED AREAS OF SCIENCE AND TECHNOLOGY • 上一篇下一篇

Dye-sensitized solar cell module realized photovoltaic and photothermal highly efficient conversion via three-dimensional printing technology

Qi-Zhang Huang(黄启章), Yan-Qing Zhu(朱艳青), Ji-Fu Shi(史继富), Lei-Lei Wang(王雷雷), Liu-Wen Zhong(钟柳文), Gang Xu(徐刚)

1 Key Laboratory of Renewable Energy, Guangzhou Institute of Energy Conversion, Chinese Academy of Sciences, Guangzhou 510640, China;
2 University of Chinese Academy of Sciences, Beijing 100049, China;
3 Department of Physics and Siyuan Laboratory, Jinan University, Guangzhou 510632, China

收稿日期:2016-10-09 修回日期:2016-12-07 出版日期:2017-03-05 发布日期:2017-03-05
通讯作者: Ji-Fu Shi, Gang Xu E-mail:shijf@ms.giec.ac.cn;xugang@ms.giec.ac.cn
基金资助:
Project supported by the National Natural Science Foundation of China (Grant Nos. 21103194, 51506205, and 21673243), the Science and Technology Planning Project of Guangdong Province, China (Grant Nos. 2014A010106018 and 2013A011401011), the Guangdong-Hong Kong Joint Innovation Project of Guangdong Province, China (Grant No. 2014B050505015), the Special Support Program of Guangdong Province, China (Grant No. 2014TQ01N610), the Director Innovation Foundation of Guangzhou Institute of Energy Conversion, China (Grant No. y307p81001), and the Solar Photothermal Advanced Materials Engineering Research Center Construction Project of Guangdong Province, China (Grant No. 2014B090904071).

Dye-sensitized solar cell module realized photovoltaic and photothermal highly efficient conversion via three-dimensional printing technology

Qi-Zhang Huang(黄启章)^1,2, Yan-Qing Zhu(朱艳青)^1,2, Ji-Fu Shi(史继富)^1,3, Lei-Lei Wang(王雷雷)¹, Liu-Wen Zhong(钟柳文)¹, Gang Xu(徐刚)¹

1 Key Laboratory of Renewable Energy, Guangzhou Institute of Energy Conversion, Chinese Academy of Sciences, Guangzhou 510640, China;
2 University of Chinese Academy of Sciences, Beijing 100049, China;
3 Department of Physics and Siyuan Laboratory, Jinan University, Guangzhou 510632, China

Received:2016-10-09 Revised:2016-12-07 Online:2017-03-05 Published:2017-03-05
Contact: Ji-Fu Shi, Gang Xu E-mail:shijf@ms.giec.ac.cn;xugang@ms.giec.ac.cn
Supported by:
Project supported by the National Natural Science Foundation of China (Grant Nos. 21103194, 51506205, and 21673243), the Science and Technology Planning Project of Guangdong Province, China (Grant Nos. 2014A010106018 and 2013A011401011), the Guangdong-Hong Kong Joint Innovation Project of Guangdong Province, China (Grant No. 2014B050505015), the Special Support Program of Guangdong Province, China (Grant No. 2014TQ01N610), the Director Innovation Foundation of Guangzhou Institute of Energy Conversion, China (Grant No. y307p81001), and the Solar Photothermal Advanced Materials Engineering Research Center Construction Project of Guangdong Province, China (Grant No. 2014B090904071).

摘要/Abstract

摘要：

Three-dimensional (3D) printing technology is employed to improve the photovoltaic and photothermal conversion efficiency of dye-sensitized solar cell (DSC) module. The 3D-printed concentrator is optically designed and improves the photovoltaic efficiency of the DSC module from 5.48% to 7.03%. Additionally, with the 3D-printed microfluidic device serving as water cooling, the temperature of the DSC can be effectively controlled, which is beneficial for keeping a high photovoltaic conversion efficiency for DSC module. Moreover, the 3D-printed microfluidic device can realize photothermal conversion with an instantaneous photothermal efficiency of 42.1%. The integrated device realizes a total photovoltaic and photothermal conversion efficiency of 49% at the optimal working condition.

关键词: 3D printing, dye-sensitized solar cell module, concentrator, microfluidic

Abstract:

Key words: 3D printing, dye-sensitized solar cell module, concentrator, microfluidic

中图分类号: (Photoelectric conversion)

84.60.Jt

88.40.-j (Solar energy) 88.40.F- (Solar concentrators) 88.40.hj (Efficiency and performance of solar cells)

黄启章, 朱艳青, 史继富, 王雷雷, 钟柳文, 徐刚. Dye-sensitized solar cell module realized photovoltaic and photothermal highly efficient conversion via three-dimensional printing technology[J]. 中国物理B, 2017, 26(3): 38401-038401.

Qi-Zhang Huang(黄启章), Yan-Qing Zhu(朱艳青), Ji-Fu Shi(史继富), Lei-Lei Wang(王雷雷), Liu-Wen Zhong(钟柳文), Gang Xu(徐刚). Dye-sensitized solar cell module realized photovoltaic and photothermal highly efficient conversion via three-dimensional printing technology[J]. Chin. Phys. B, 2017, 26(3): 38401-038401.

参考文献 30

[1]	Sarsam W S, Kazi S N and Badarudin A 2015 Solar Energy 122 1245
[2]	Feng L F, Zhao K, Dai H T, Wang S G and Sun X W 2016 Chin. Phys. B 25 037307
[3]	Ma W, Zhang F and Meng S 2014 Chin. Phys. B 23 086801
[4]	Mariani P, Vesce L and Carlo A D 2015 Semicond. Sci. Tech. 30
[5]	Huang Y, Dai S Y, Chen S H, Hu L H, Kong F T, Kou D X and Jiang N Q 2010 Acta Phys. Chim. Sin. 59 643
[6]	Stuckings M F and Blakers A W 1999 Sol. Energ. Mat. Sol. C 59 233
[7]	Giordano F, Guidobaldi A, Petrolati E, Vesce L, Riccitelli R, Reale A, Brown T M and Carlo A D 2012 Prog. Photovoltaics 21 1653
[8]	Buhbut S, Clifford J N, Kosa M, Anderson A Y, Shalom M, Major D T, Palomares E and Zaban A 2013 Energ. Environ. Sci. 6 3046
[9]	O'regan B and Grätzel M 1991 Nature 353 737
[10]	Wang H, Xu X Q, Shi J F and Xu G 2013 Acta Phys. Chim. Sin. 29 525
[11]	Hagfeldt A, Boschloo G, Sun L, Kloo L and Pettersson H 2010 Chem. Rev. 110 6595
[12]	Dai P P, Yang L, Liang M, Dong H H, Wang P, Zhang C Y, Sun Z and Xue S 2015 Acs Appl. Mater. Inter. 7 22436
[13]	Yue J, Zhao P, Gerasimov J Y, Lagemaat M, Grotenhuis A, Rustema-Abbing M, Mei H C, Busscher H J, Herrmann A and Ren Y J 2015 Adv. Funct. Mater. 25 6756
[14]	Anderson K B, Lockwood S Y, Martin R S and Spence D M 2013 Anal. Chem. 85 5623
[15]	Gross B C, Erkal J L, Lockwood S Y, Chen C P and Spence D M 2014 Anal. Chem. 86 3240
[16]	Khaled S A, Burley J C, Alexander M R and Roberts C J 2014 Int. J. Pharmaceut. 461 105
[17]	Derby B 2012 Science 338 921
[18]	Sun K, Wei T S, Ahn B Y, Seo J Y, Dillon S J and Lewis J A 2013 Adv. Mater. 25 4539
[19]	Mannoor M S, Jiang Z, James T, Kong Y L, Malatesta K A, Soboyejo W O, Verma N, Gracias D H and McAlpine M C 2013 Nano Lett. 13 2634
[20]	Kim K, Zhu W, Qu X, Aaronson C, McCall W R, Chen S and Sirbuly D J 2014 Acs Nano 8 9799
[21]	Winston R 2005 Nonimaging Optics 264 76
[22]	Waghmare S A and Gulhane N P 2016 Sol. Energy 137 165
[23]	Huang S Y, Schlichthorl G, Nozik A J, Gratzel M and Frank A J 1997 J. Phys. Chem. B 101 2576
[24]	Snaith H J, Schmidt-Mende L, Gratzel M and Chiesa M 2006 Phys. Rev. B 74
[25]	Paul D I, Smyth M, Zacharopoulos A and Mondol J 2013 Solar Energy 33 3
[26]	Kuang D, Wang P, Ito S, Zakeeruddin S M and Graetzel M 2006 J. Am. Chem. Soc. 128 7732
[27]	Sebastian P J, Olea A, Campos J, Toledo J A and Gamboa S A 2004 Sol. Energ. Mat. Sol. C. 81 349
[28]	Zhu T T, Diao Y H, Zhao Y H and Li F F 2016 Appl. Therm. Eng. 98 1201
[29]	Zhao J F, Song Y C, Lam W H, Liu W G, Liu Y, Zhang Y and Wang D Y 2011 Energ. Convers. Manage 52 1343
[30]	Mittelman G, Kribus A and Dayan A 2007 Energ. Convers. Manage 48 2483

Dye-sensitized solar cell module realized photovoltaic and photothermal highly efficient conversion via three-dimensional printing technology

Dye-sensitized solar cell module realized photovoltaic and photothermal highly efficient conversion via three-dimensional printing technology

RichHTML

PDF (PC)

赞

可视化

摘要/Abstract

引用本文

使用本文

参考文献 30

相关文章 14

Metrics

本文评价

推荐阅读 0

[1]	Guoqiang Li(李国强), Yanping Liu(刘艳平), Jingru Yao(姚静如), Kena Song(宋克纳), Gao Wang(王高), Lianjie Zhou(周连杰), Guo Chen(陈果), and Liyu Liu(刘雳宇). Biophysical model for high-throughput tumor and epithelial cell co-culture in complex biochemical microenvironments[J]. 中国物理B, 2022, 31(2): 28703-028703.
[2]	Jia-Hui Wang(王佳慧), Guo-Yang Wang(王国阳), Xin Liu(刘欣), Si-Yu Shao(邵思雨), Hai-Yun Huang(黄海云), Chen-Xin Ding(丁晨鑫), Bo Su(苏波), and Cun-Lin Zhang(张存林). Effect of external electric field on the terahertz transmission characteristics of electrolyte solutions[J]. 中国物理B, 2021, 30(11): 110204-110204.
[3]	高崴, 于程, 姚峰. Droplets breakup via a splitting microchannel[J]. 中国物理B, 2020, 29(5): 54702-054702.
[4]	刘琦, 俞钰峰, 赵文生, 李慧. Microfluidic temperature sensor based on temperature-dependent dielectric property of liquid[J]. 中国物理B, 2020, 29(1): 10701-010701.
[5]	Slimane Latreche, Mohamed Fathi, Abderrahmane Kadri. New design of ferroelectric solar cell combined with luminescent solar concentrator[J]. 中国物理B, 2019, 28(8): 88801-088801.
[6]	吴梁玉, 刘凌波, 韩笑天, 李倩文, 杨卫波. Numerical simulation on dynamic behaviors of bubbles flowing through bifurcate T-junction in microfluidic device[J]. 中国物理B, 2019, 28(10): 104702-104702.
[7]	张耀举, 李艺杰, 林洁, 方朝龙, 刘思远. Application of millimeter-sized polymer cylindrical lens array concentrators in solar cells[J]. 中国物理B, 2018, 27(5): 58801-058801.
[8]	陈新莲, 伍罕, 巫金波. Surface-tension-confined droplet microfluidics[J]. 中国物理B, 2018, 27(2): 29202-029202.
[9]	李岳南, 海苗苗, 赵宇, 吕亚蕾, 何益, 陈果, 刘雳宇, 刘如川, Guigen Zhang. Controlled generation of cell-laden hydrogel microspheres with core-shell scaffold mimicking microenvironment of tumor[J]. 中国物理B, 2018, 27(12): 128703-128703.
[10]	Nur Izzati Ishak,S V Muniandy,Vengadesh Periasamy,Fong-Lee Ng,Siew-Moi Phang. Anisotropic transport of microalgae Chlorella vulgaris in microfluidic channel[J]. 中国物理B, 2017, 26(8): 88203-088203.
[11]	张峰, 张宁宁, 张义, 闫森, 孙松, 鲍骏, 高琛. Theoretical simulation and analysis of large size BMP-LSC by 3D Monte Carlo ray tracing model[J]. 中国物理B, 2017, 26(5): 54201-054201.
[12]	韩伟静, 袁伟, 朱江瑞, 樊琪慧, 屈军乐, 刘雳宇, on behalf of the U.S.-China Physical Sciences-Oncology Alliance. In vitro three-dimensional cancer metastasis modeling: Past, present, and future[J]. 中国物理B, 2016, 25(1): 18709-018709.
[13]	崔敏, 陈诺夫, 邓金祥, 刘立英. Thermal modeling optimization and experimental validation for a single concentrator solar cell system with a heat sink[J]. 中国物理B, 2013, 22(8): 84208-084208.
[14]	任玉坤, 陶冶, 侯立凯, 姜洪源. Automatic microcircuit formation based on gold-coated SU-8 microrods via dielectrophoresis[J]. 中国物理B, 2013, 22(8): 87701-087701.