Fracture characteristics of bulk metallic glass under high speed impact

doi:10.1088/1674-1056/21/5/056101

中国物理B ›› 2012, Vol. 21 ›› Issue (5): 56101-056101.doi: 10.1088/1674-1056/21/5/056101

Fracture characteristics of bulk metallic glass under high speed impact

孙宝茹,战再吉,梁波,张瑞军,王文魁

State Key Laboratory of Metastable Materials Science and Technology, Yanshan University, Qinhuangdao 066004, China

收稿日期:2011-05-31 修回日期:2012-04-27 出版日期:2012-04-01 发布日期:2012-04-01
基金资助:
Project supported by the National Basic Research Program of China (Grant No. 2010CB731600).

Fracture characteristics of bulk metallic glass under high speed impact

Sun Bao-Ru(孙宝茹), Zhan Zai-Ji(战再吉)^†, Liang Bo(梁波), Zhang Rui-Jun(张瑞军), and Wang Wen-Kui(王文魁)

State Key Laboratory of Metastable Materials Science and Technology, Yanshan University, Qinhuangdao 066004, China

Received:2011-05-31 Revised:2012-04-27 Online:2012-04-01 Published:2012-04-01
Supported by:
Project supported by the National Basic Research Program of China (Grant No. 2010CB731600).

摘要/Abstract

摘要： High speed impact experiments of rectangular plate-shaped Zr₄₁Ti₁₄Cu_12.5Ni₁₀Be_22.5 bulk metallic glass (BMG) were performed using a two-stage light gas gun. Under spherical shock waves with impact velocities ranging from 0.503 km/s to 4.917 km/s, obvious traces of laminated spallation at the back (free) surface and melting (liquid droplets) at the impact point were observed. The angles about 0?, 17?, 36?, and 90? to the shocking direction were shown in the internal samples because of the interaction between the compressive shock waves and the rarefaction waves. The compressive normal stress was found to induce the consequent temperature rise in the core of the shear band.

关键词: bulk metallic glass, shock wave, shear cracks/bands

Abstract: High speed impact experiments of rectangular plate-shaped Zr₄₁Ti₁₄Cu_12.5Ni₁₀Be_22.5 bulk metallic glass (BMG) were performed using a two-stage light gas gun. Under spherical shock waves with impact velocities ranging from 0.503 km/s to 4.917 km/s, obvious traces of laminated spallation at the back (free) surface and melting (liquid droplets) at the impact point were observed. The angles about 0°, 17°, 36°, and 90° to the shocking direction were shown in the internal samples because of the interaction between the compressive shock waves and the rarefaction waves. The compressive normal stress was found to induce the consequent temperature rise in the core of the shear band.

Key words: bulk metallic glass, shock wave, shear cracks/bands

中图分类号: (Amorphous semiconductors, metals, and alloys)

61.43.Dq

62.20.M- (Structural failure of materials) 62.50.-p (High-pressure effects in solids and liquids)

孙宝茹, 战再吉, 梁波, 张瑞军, 王文魁. Fracture characteristics of bulk metallic glass under high speed impact[J]. 中国物理B, 2012, 21(5): 56101-056101.

Sun Bao-Ru(孙宝茹), Zhan Zai-Ji(战再吉), Liang Bo(梁波), Zhang Rui-Jun(张瑞军), and Wang Wen-Kui(王文魁) . Fracture characteristics of bulk metallic glass under high speed impact[J]. Chin. Phys. B, 2012, 21(5): 56101-056101.

参考文献 23

[1]	Tang X P, Geyer U, Busch R, Johnson W L and Wu Y 1999 Nature 402 160
[2]	Wei H Q, Long Z L and Zhang Z C 2009 Acta Phys. Sin. 58 2556 (in Chinese)
[3]	Dai L H, Liu L F, Yan M and Wei B C 2004 Chin. Phys. Lett. 21 1593
[4]	Subhash G, Dowding R and Kecskes L 2002 Mater. Sci. Eng. A 334 33
[5]	Liu L F, Dai L H and Bai Y L 2008 Chin. Phys. Lett. 25 1052
[6]	Conner R, Choi-Yim H and Johnson W 1999 J. Mater. Res. 14 3292
[7]	Nathenson D 2006 Experimental Investigation of High Velocity Impacts on Brittle Materials (Ph. D. dissertation) (Cleveland:Case Western Reserve University) p. 78
[8]	Yang C, Liu R P, Zhang B Q, Wang Q, Zhan Z J, Sun L L, Zhang J and Gong Z Z 2005 J. Mater. Sci. 40 3917
[9]	Yang C, Wang W K, Liu R P, Zhang X Y and Li X 2006 Journal of Spacecraft and Rockets 43 565
[10]	Zhuang S M, Lu J and Ravichandran G 2002 Appl. Phys. Lett. 80 4522
[11]	Mukai T, Nieh T, Kawamura Y, Inoue A and Higashi K 2002 Intermetallics 10 1071
[12]	Morgana M 2008 Quasar Structure from Microlensing in Gravitationally Lensed Quasars (Ph. D. dissertation) (Atlanta:Georgia Institute of Technology) pp. 14--28
[13]	Lu J 2002 Mechanical Behavior of a Bulk Metallic Glass and its Composite over a Wide Range of Strain Rates and Temperatures (Ph. D. Dissertation) (Pasadena:California Institute of Technology) pp. 172--177, p. 54
[14]	Hufnagel T C, Jiao T, Li Y, Xing L Q and Ramesh K T 2002 J. Mater. Res. 17 1441
[15]	Bach J, Krueger B and Fultz B 1991 Mater. Lett. 11 383
[16]	Conner R D, Dandliker R B, Scruggs V and Johnson W L 2000 International Journal of Impact Engineering 24 435
[17]	Bruck H A, Rosakis A J and Johnson W L 1996 J. Mater. Res. 11 503
[18]	Yang C 2005 The Shock Wave Effect of ZrTiCuNiBe Bulk Metallic Glass (Ph. D. Dissertation) (Qinhuangdao:Yanshan University) pp. 24--33
[19]	Subhash G 2000 ASM Handbook, Mechanical Testing and Evaluation, ASM International 8 519
[20]	Zhang H W, Spandan M and Subhash G 2008 J. Mech. Phys. Solids 56 2171
[21]	Seaman L, Curran D R and Shockey D A 1976 J. Appl. Phys. 47 4814
[22]	Deng X L, Zhu W J, Song Z F, He H L and Jing F Q 2009 Acta Phys. Sin. 58 4772 (in Chinese)
[23]	Wang F, Peng X S, Liu S Y, Li Y S, Jiang X H and Ding Y K 2011 Chin. Phys. B 20 065202

Fracture characteristics of bulk metallic glass under high speed impact

Fracture characteristics of bulk metallic glass under high speed impact

PDF (PC)

赞

可视化

摘要/Abstract

引用本文

使用本文

参考文献 23

相关文章 15

Metrics

本文评价

推荐阅读 0

[1]	Deshen Geng(耿德珅), Danyang Liu(刘丹阳), Jianying Lu(鲁建英), Chao Chen(陈超), Junying Wu(伍俊英), Shuzhou Li(李述周), and Lang Chen(陈朗). Generation of laser-driven flyer dominated by shock-induced shear bands: A molecular dynamics simulation study[J]. 中国物理B, 2022, 31(2): 24101-024101.
[2]	Shao-Wei Sun(孙少伟), Guan-Qing Tang(汤观晴), Ya-Fei Huang(黄亚飞), Liang-Zhi Cao(曹良志), and Xiao-Ping Ouyang(欧阳晓平). Comparative investigation of microjetting generated from monocrystalline tin surface and polycrystalline tin surface under plane impact loading[J]. 中国物理B, 2021, 30(10): 104701-104701.
[3]	宋先钊, 李斌, 解立峰. Experimental investigation on the properties of liquid film breakup induced by shock waves[J]. 中国物理B, 2020, 29(8): 86201-086201.
[4]	王健, 阮文俊, 王浩, 张莉莉. Studies of flow field characteristics during the impact of a gaseous jet on liquid-water column[J]. 中国物理B, 2019, 28(6): 64704-064704.
[5]	张绍龙, 刘伟, 王贵林, 章征伟, 孙奇志, 张朝辉, 李军, 池原, 张南川. Investigation of convergent Richtmyer-Meshkov instability at tin/xenon interface with pulsed magnetic driven imploding[J]. 中国物理B, 2019, 28(4): 44702-044702.
[6]	Apul N Dev. Lower order three-dimensional Burgers equation having non-Maxwellian ions in dusty plasmas[J]. 中国物理B, 2017, 26(2): 25203-025203.
[7]	许欢, 范鹏飞, 马勇, 郭霞生, 杨平, 屠娟, 章东. Study on shock wave-induced cavitation bubbles dissolution process[J]. 中国物理B, 2017, 26(2): 24301-024301.
[8]	邢秋玮, 张勇. Amorphous phase formation rules in high-entropy alloys[J]. 中国物理B, 2017, 26(1): 18104-018104.
[9]	赵林志, 薛荣洁, 汪卫华, 白海洋. LaGa-based bulk metallic glasses[J]. 中国物理B, 2017, 26(1): 18106-018106.
[10]	韩敬华, 罗莉, 张玉波, 胡锐峰, 冯国英. Conditions for laser-induced plasma to effectively remove nano-particles on silicon surfaces[J]. 中国物理B, 2016, 25(9): 95204-095204.
[11]	任国武, 张世文, 洪仁楷, 汤铁钢, 陈永涛. Influence of shockwave profile on ejecta from shocked Pb surface: Atomistic calculations[J]. 中国物理B, 2016, 25(8): 86202-086202.
[12]	税敏, 储根柏, 辛建婷, 吴玉迟, 朱斌, 何卫华, 席涛, 谷渝秋. Laser-driven flier impact experiments at the SG-III prototype laser facility[J]. 中国物理B, 2015, 24(9): 94701-094701.
[13]	俞宇颖, 习锋, 戴诚达, 蔡灵仓, 谭叶, 李雪梅, 吴强, 谭华. Dynamic strength behavior of a Zr-based bulk metallic glassunder shock loading[J]. 中国物理B, 2015, 24(6): 66201-066201.
[14]	张略, 王祥达, 刘晓宙, 龚秀芬. Sound field prediction of ultrasonic lithotripsy in water with spheroidal beam equations[J]. , 2015, 24(1): 14301-014301.
[15]	杨高林, 林鑫, 宋梦华, 胡桥, 汪志太, 黄卫东. Decline of nucleation in the heating process with a high heating rate[J]. , 2014, 23(8): 86401-086401.