Theoretical study of a melting curve for tin

doi:10.1088/1674-1056/18/7/046

中国物理B ›› 2009, Vol. 18 ›› Issue (7): 2898-2900.doi: 10.1088/1674-1056/18/7/046

Theoretical study of a melting curve for tin

习锋, 蔡灵仓

National Key Laboratory for Shock Wave and Detonation Physics Research, Institute of Fluid Physics, CAEP, Mianyang 621900, China

收稿日期:2008-10-28 修回日期:2008-11-18 出版日期:2009-07-20 发布日期:2009-07-20
基金资助:
Project supported by the National Natural Science Foundation of China (Grant No 10776029/A06).

Theoretical study of a melting curve for tin

Xi Feng(习锋)^† and Cai Ling-Cang(蔡灵仓)

National Key Laboratory for Shock Wave and Detonation Physics Research, Institute of Fluid Physics, CAEP, Mianyang 621900, China

Received:2008-10-28 Revised:2008-11-18 Online:2009-07-20 Published:2009-07-20
Supported by:
Project supported by the National Natural Science Foundation of China (Grant No 10776029/A06).

摘要/Abstract

摘要： The melting curve of Sn has been calculated using the dislocation-mediated melting model with the `zone-linking method'. The results are in good agreement with the experimental data. According to our calculation, the melting temperature of γ -Sn at zero pressure is about 436~K obtained by the extrapolation of the method from the triple point of Sn. The results show that this calculation method is better than other theoretical methods for predicting the melting curve of polymorphic material Sn.

Abstract: The melting curve of Sn has been calculated using the dislocation-mediated melting model with the `zone-linking method'. The results are in good agreement with the experimental data. According to our calculation, the melting temperature of $\gamma$ -Sn at zero pressure is about 436 K obtained by the extrapolation of the method from the triple point of Sn. The results show that this calculation method is better than other theoretical methods for predicting the melting curve of polymorphic material Sn.

Key words: melting temperature, thermodynamic property, phase transition, tin

中图分类号: (Solid-liquid transitions)

64.70.D-

61.72.Lk (Linear defects: dislocations, disclinations) 62.50.-p (High-pressure effects in solids and liquids)

习锋, 蔡灵仓. Theoretical study of a melting curve for tin[J]. 中国物理B, 2009, 18(7): 2898-2900.

Xi Feng(习锋) and Cai Ling-Cang(蔡灵仓). Theoretical study of a melting curve for tin[J]. Chin. Phys. B, 2009, 18(7): 2898-2900.

[1]	Xuanhao Fu(傅宣豪) and Xin Zhou(周昕). Different roles of surfaces' interaction on lattice mismatched/matched surfaces in facilitating ice nucleation[J]. 中国物理B, 2023, 32(2): 28202-028202.
[2]	Tian-Shou Liang(梁添寿), Peng-Peng Shi(时朋朋), San-Qing Su(苏三庆), and Zhi Zeng(曾志). Learning physical states of bulk crystalline materials from atomic trajectories in molecular dynamics simulation[J]. 中国物理B, 2022, 31(12): 126402-126402.
[3]	Li-Ping Wang(王利平), Wei-Liang Kong(孔维梁), Pei-Xiang Bian(边佩翔), Fu-Xin Wang(王福新), and Hong Liu(刘洪). Suppression of ice nucleation in supercooled water under temperature gradients[J]. 中国物理B, 2021, 30(6): 68203-068203.
[4]	黄晓, 曹则贤, 王强. The universal characteristic water content of aqueous solutions[J]. 中国物理B, 2019, 28(6): 65101-065101.
[5]	白晓军, 汪姚岑, 曹崇德. Metastable phase separation and rapid solidification of undercooled Co₄₀Fe₄₀Cu₂₀ alloy[J]. 中国物理B, 2018, 27(11): 116402-116402.
[6]	郭伟, 赵立山, 高欣, 曹则贤, 王强. Accurate quantification of hydration number for polyethylene glycol molecules[J]. 中国物理B, 2018, 27(5): 55101-055101.
[7]	龙飞沄, 刘海涛, 李大芳, 颜君. Equation of state for warm dense lithium: A first principles investigation[J]. 中国物理B, 2017, 26(6): 65101-065101.
[8]	赵立山, 潘礼庆, 纪爱玲, 曹则贤, 王强. Recrystallization of freezable bound water in aqueous solutions of medium concentrations[J]. 中国物理B, 2016, 25(7): 75101-075101.
[9]	李晨辉, 韩秀君, 栾英伟, 李建国. Structural origin underlying the effect of cooling rate on solidification point[J]. 中国物理B, 2015, 24(11): 116101-116101.
[10]	姬小建, 陈明文, 徐小花, 王自东. Effect of far-field flow on a columnar crystal in the convective undercooled melt[J]. , 2015, 24(1): 16401-016401.
[11]	魏恩泊, 纪艳菊, 张军. Modeling effective viscosity reduction behaviour of solid suspensions[J]. Chin. Phys. B, 2012, 21(12): 126601-126601.
[12]	曹斌, 林鑫, 王猛, 黄卫东 . The effect of two-dimensional shear flow on the stability of a crystal interface in the supercooled melt[J]. 中国物理B, 2012, 21(8): 86401-086401.
[13]	曹斌,林鑫,王猛,黄卫东. Linear stability analysis on a spherical particle growing from a binary melt under the far-field flow[J]. 中国物理B, 2012, 21(5): 56401-056401.
[14]	肖绪洋. Irregular phenomenon induced by Ag atomic segregation during the heating process of Ag–Pd cluster[J]. 中国物理B, 2010, 19(11): 113604-114203.
[15]	赵世贵, 王保成, 孙权. Effect of physical disturbance on the structure of needle coke[J]. 中国物理B, 2010, 19(10): 108101-108101.

Theoretical study of a melting curve for tin

Theoretical study of a melting curve for tin

PDF (PC)

赞

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

Metrics

本文评价

推荐阅读 0