中国物理B ›› 2009, Vol. 18 ›› Issue (2): 815-820.doi: 10.1088/1674-1056/18/2/067

• 8000 CROSSDISCIPLINARY PHYSICS AND RELATED AREAS OF SCIENCE AND TECHNOLOGY • 上一篇    下一篇

Grain size reduction of copper subjected to repetitive uniaxial compression combined with accumulative fold

邹永涛, 雷力, 王赵, 王江华, 张伟, 贺端威   

  1. Institute of Atomic and Molecular Physics, Sichuan University, Chengdu 610065, China; College of Physical Science and Technology, Sichuan University, Chengdu 610064, China
  • 收稿日期:2008-03-08 修回日期:2008-05-17 出版日期:2009-02-20 发布日期:2009-02-20
  • 基金资助:
    Project supported by the National Natural Science Foundation of China (Grant No 50572067).

Grain size reduction of copper subjected to repetitive uniaxial compression combined with accumulative fold

Zou Yong-Tao(邹永涛), Lei Li(雷力), Wang Zhao(王赵), Wang Jiang-Hua(王江华), Zhang Wei(张伟), and He Duan-Wei(贺端威)†   

  1. Institute of Atomic and Molecular Physics, Sichuan University, Chengdu 610065, China; College of Physical Science and Technology, Sichuan University, Chengdu 610064, China
  • Received:2008-03-08 Revised:2008-05-17 Online:2009-02-20 Published:2009-02-20
  • Supported by:
    Project supported by the National Natural Science Foundation of China (Grant No 50572067).

PDF (PC)

614

赞

摘要： This paper reports a novel method of repetitive uniaxial compression combined with accumulative fold for preparing bulk submicron- to nanocrystalline copper starting with a coarse grained counterpart. Grain size reduction and microstrain variations of the high purity copper samples after different passes of compression and fold are investigated by scanning electron microscope and x-ray diffraction (XRD), respectively. Our results show that the average grain size of samples decreases from about 830nm to 127nm as the number of compression passes increases to 30. Microstrain in the compressed sample is found to increase for the first 20 passes, but to decrease at the last 10 passes. The variations of compressive yield strength and the shift of XRD peaks to larger diffraction angles are observed in the squeezed sample. Our experimental results demonstrate that the repetitive uniaxial compression combined with accumulative fold is an effective method to prepare bulk nanocrystalline metallic materials, in particular for soft metals such as Cu, Al and Pb.

Abstract: This paper reports a novel method of repetitive uniaxial compression combined with accumulative fold for preparing bulk submicron- to nanocrystalline copper starting with a coarse grained counterpart. Grain size reduction and microstrain variations of the high purity copper samples after different passes of compression and fold are investigated by scanning electron microscope and x-ray diffraction (XRD), respectively. Our results show that the average grain size of samples decreases from about 830nm to 127nm as the number of compression passes increases to 30. Microstrain in the compressed sample is found to increase for the first 20 passes, but to decrease at the last 10 passes. The variations of compressive yield strength and the shift of XRD peaks to larger diffraction angles are observed in the squeezed sample. Our experimental results demonstrate that the repetitive uniaxial compression combined with accumulative fold is an effective method to prepare bulk nanocrystalline metallic materials, in particular for soft metals such as Cu, Al and Pb.

Key words: uniaxial compression, accumulative fold, grain size reduction, bulk nanocrystalline materials

中图分类号:  (Mechanical properties of nanoscale systems)

  • 62.25.-g
62.20.F- (Deformation and plasticity) 81.40.Lm (Deformation, plasticity, and creep) 61.46.Hk (Nanocrystals) 81.16.-c (Methods of micro- and nanofabrication and processing) 81.07.Bc (Nanocrystalline materials)