中国物理B ›› 2021, Vol. 30 ›› Issue (5): 57502-057502.doi: 10.1088/1674-1056/abd771
Process modeling gas atomization of close-coupled ring-hole nozzle for 316L stainless steel powder production
Peng Wang(汪鹏)1,2, Jing Li(李静)1,2,‡, Hen-San Liu(刘恒三)1,2, Xin Wang(王欣)1,2, Bo-Rui Du(杜博睿)1,2, Ping Gan(甘萍)3, Shi-Yuan Shen(申世远)1,2, Bin Fan(范斌)1,2, Xue-Yuan Ge(葛学元)1,2,§, and Miao-Hui Wang(王淼辉)1,2,†
- 1 State Key Laboratory for Advanced Forming Technology and Equipment, China Academy of Machinery and Technology, Beijing 100083, China;
2 Beijing National Innovation Institute of Lightweight Ltd., Beijing 100083, China;
3 School of Materials Science and Engineering, University of Science and Technology Beijing, Beijing 100083, China
Process modeling gas atomization of close-coupled ring-hole nozzle for 316L stainless steel powder production
Peng Wang(汪鹏)1,2, Jing Li(李静)1,2,‡, Hen-San Liu(刘恒三)1,2, Xin Wang(王欣)1,2, Bo-Rui Du(杜博睿)1,2, Ping Gan(甘萍)3, Shi-Yuan Shen(申世远)1,2, Bin Fan(范斌)1,2, Xue-Yuan Ge(葛学元)1,2,§, and Miao-Hui Wang(王淼辉)1,2,†
- 1 State Key Laboratory for Advanced Forming Technology and Equipment, China Academy of Machinery and Technology, Beijing 100083, China;
2 Beijing National Innovation Institute of Lightweight Ltd., Beijing 100083, China;
3 School of Materials Science and Engineering, University of Science and Technology Beijing, Beijing 100083, China
摘要： The paper aims at modeling and simulating the atomization process of the close-coupled ring-hole nozzle in vacuum induction gas atomization (VIGA) for metallic powder production. First of all, the primary atomization of the ring-hole nozzle is simulated by the volume of fluid (VOF) coupled large eddy simulation (LES) model. To simulate the secondary atomization process, we use the method of selecting the droplet sub-model and the VOF model. The results show that the ring-hole nozzle forms a gas recirculation zone at the bottom of the delivery tube, which is the main reason for the formation of an annular liquid film during the primary atomization. In addition, the primary atomization process of the ring-hole nozzle consists of three stages: the formation of the serrated liquid film tip, the appearance and shedding of the ligaments, and the fragmentation of ligaments. At the same time, the primary atomization mainly forms spherical droplets and long droplets, but only the long droplets can be reserved and proceed to the secondary atomization. Moreover, increasing the number of ring holes from 18 to 30, the mass median diameter (MMD, d50) of the primary atomized droplets decreases first and then increases, which is mainly due to the change of the thickness of the melt film. Moreover, the secondary atomization of the ring-hole nozzles is mainly in bag breakup mode and multimode breakup model, and bag breakup will result in the formation of hollow powder, which can be avoided by increasing the gas velocity.
中图分类号: (Metals and alloys)
- 75.47.Np