中国物理B ›› 2008, Vol. 17 ›› Issue (10): 3596-3602.doi: 10.1088/1674-1056/17/10/011

• • 上一篇    下一篇

Design and FPGA Implementation of a new hyperchaotic system

王忠林1, 王光义2, 包旭雷2   

  1. (1)Department of Physics and Electronics Science, Binzhou University, Binzhou 256604, China; (2)School of Electronics Information, Hangzhou Dianzi University, Hangzhou 310018, China
  • 收稿日期:2008-01-31 修回日期:2008-03-25 出版日期:2008-10-20 发布日期:2008-10-20
  • 基金资助:
    Project supported by the Natural Science Foundation of Zhejiang Province, China (Grant No Y105175) and the Science investigation Foundation of Hangzhou Dianzi University, China (Grant No KYS051505010).

Design and FPGA Implementation of a new hyperchaotic system

Wang Guang-Yi(王光义)a)†, Bao Xu-Lei(包旭雷)a), and Wang Zhong-Lin(王忠林)b)   

  1. a School of Electronics Information, Hangzhou Dianzi University, Hangzhou 310018, China; b Department of Physics and Electronics Science, Binzhou University, Binzhou 256604, China
  • Received:2008-01-31 Revised:2008-03-25 Online:2008-10-20 Published:2008-10-20
  • Supported by:
    Project supported by the Natural Science Foundation of Zhejiang Province, China (Grant No Y105175) and the Science investigation Foundation of Hangzhou Dianzi University, China (Grant No KYS051505010).

PDF (PC)

1911

赞

摘要： In this paper, a new four-dimensional autonomous hyperchaotic system is designed for generating complex chaotic signals. In the design, its parameters are selected according to the requirements for chaos and hyperchaos. The hyperchaotic nature is verified theoretically by using the bifurcation analysis and demonstrated experimentally by the implementation of an analogue electronic circuit. Moreover, the Field Programmable Gate Array (FPGA) technology is applied to implementing a continuous system in a digital form by using a chip of Altera Cyclone II EP2C35F484C8. The digital sequence generated from the FPGA device is observed in our experimental setup.

关键词: Hyperchaos, bifurcation, FPGA implementation

Abstract: In this paper, a new four-dimensional autonomous hyperchaotic system is designed for generating complex chaotic signals. In the design, its parameters are selected according to the requirements for chaos and hyperchaos. The hyperchaotic nature is verified theoretically by using the bifurcation analysis and demonstrated experimentally by the implementation of an analogue electronic circuit. Moreover, the Field Programmable Gate Array (FPGA) technology is applied to implementing a continuous system in a digital form by using a chip of Altera Cyclone II EP2C35F484C8. The digital sequence generated from the FPGA device is observed in our experimental setup.

Key words: Hyperchaos, bifurcation, FPGA implementation

中图分类号:  (Nonlinear dynamics and chaos)

  • 05.45.-a
84.30.Sk (Pulse and digital circuits)