Anti-oxidation characteristics of Cr-coating on surface of Ti-45Al-8.5Nb alloy by plasma surface metallurgy technique

doi:10.1088/1674-1056/aba9c2

中国物理B ›› 2020, Vol. 29 ›› Issue (12): 126101-.doi: 10.1088/1674-1056/aba9c2

• CONDENSED MATTER: STRUCTURAL, MECHANICAL, AND THERMAL PROPERTIES • 上一篇下一篇

收稿日期:2020-05-28 修回日期:2020-07-20 接受日期:2020-07-28 出版日期:2020-12-01 发布日期:2020-12-02

Anti-oxidation characteristics of Cr-coating on surface of Ti-45Al-8.5Nb alloy by plasma surface metallurgy technique

Bing Zhou(周兵), Ya-Rong Wang(王亚榕), Ke Zheng(郑可), Yong Ma(马永), Yong-Sheng Wang(王永胜)†, Sheng-Wang Yu(于盛旺), and Yu-Cheng Wu(吴玉程)

Institute of New Carbon Materials, Taiyuan University of Technology, Taiyuan 030024, China

Received:2020-05-28 Revised:2020-07-20 Accepted:2020-07-28 Online:2020-12-01 Published:2020-12-02
Contact: ^†Corresponding author. E-mail: wangyongsheng@tyut.edu.cn
Supported by:
Project supported by the National Natural Science Foundation of China (Grant No. 51601122), the 2019-2020 Intergovernmental Cooperation Projects in Science and Technology of the Ministry of Science and Technology, China (Grant No. CB02-03), the Science and Technology Major Project of Shanxi Province, China (Grant No. 20181102013), the "331 Project" Engineering Research Center of Shanxi Province, China (Grant No. PT201801), the China Postdoctoral Science Foundation (Grant No. 2017M620574), and the Fund from the State Key Laboratory of Advanced Metal Materials, China (Grant No. 2019-ZD02).

摘要/Abstract

Abstract: TiAl-based alloys have received extensive attention recently due to their excellent properties. However, the weak oxidation resistance at temperatures higher than 800 ^°C can limit their further high-temperature structural applications. To improve the oxidation resistance of a high-Nb-content γ -TiAl alloy (Ti-45Al-8.5Nb, in units of at.%), a chromium (Cr) coating is prepared by using the plasma surface alloying technique, separately, at 800 ^°C and 1000 ^°C. The x-ray diffraction (XRD) patterns reveal that an oxide surface layer consisting of Cr₂O₃, Al₂O₃, and TiO₂ is produced on the Cr-coated Nb containing γ -TiAl substrates during the initial oxidation. However, the Cr₂O₃ is dominated in the oxide surface layer after being isothermally oxidized for 300 h. The oxidation kinetic curves are composed of a parabolic law stage ( ≤ 90 h) and a biquadratic law stage ( ≥ 90 h), fit by weight-gain curves. Due to diffusion in the fabrication process and oxidation process, the Cr-coated specimens have an adhesion force after being isothermally oxidized, specifically 69 N for a specimen after oxidation for 300 h. These results demonstrate that the Cr coating enhances the oxidation resistance and adhesion of a Ti-45Al-8.5Nb alloy, which may provide a new feasible scheme for designing oxidation protection layers.

Key words: titanium aluminum alloy, coating, isothermal oxidation, plasma surface alloying technique

中图分类号: (Techniques for structure determination)

61.05.-a

61.82.Bg (Metals and alloys) 68.37.-d (Microscopy of surfaces, interfaces, and thin films)

. [J]. 中国物理B, 2020, 29(12): 126101-.

Bing Zhou(周兵), Ya-Rong Wang(王亚榕), Ke Zheng(郑可), Yong Ma(马永), Yong-Sheng Wang(王永胜), Sheng-Wang Yu(于盛旺), and Yu-Cheng Wu(吴玉程). Anti-oxidation characteristics of Cr-coating on surface of Ti-45Al-8.5Nb alloy by plasma surface metallurgy technique[J]. Chin. Phys. B, 2020, 29(12): 126101-.

参考文献

[1] Yamaguchi M, Inui H and Ito K Acta Mater. 48 307 DOI: 10.1016/S1359-6454(99)00301-82000
[2] Kim Y W JOM 41 24 https://link.springer.com/article/10.1007/BF032202671989
[3] Becker S, Rahmel A, Schorr M and Schütze M Oxid. Metal. 38 425 DOI: 10.1007/BF006656631992
[4] Yoshihara M and Kim Y W Intermetallics 13 952 DOI: 10.1016/j.intermet.2004.12.0072005
[5] Lin J P, Zhao L L, Li G Y, Zhang L Q, Song X P, Ye F and Chen G L Intermetallics 19 131 DOI: 10.1016/j.intermet.2010.08.0292011
[6] Zhang X J, Li Q, Zhao S Y, Gao C X, Wang L and Zhang J Appl. Surf. Sci. 255 1860 DOI: 10.1016/j.apsusc.2008.06.0412008
[7] Cheng Y X, Wang W, Zhu S L and Wang F H
[8] Taniguchi S, Shibata T and Murakamit A Oxid. Metal. 41 103 DOI: 10.1007/BF011966451994 https://kns.cnki.net/kcms/detail/detail.aspx?dbcode=CJFD&dbname=CJFD2009&filename=FSFJ200903016&v=aOz
[9] Wei XF, Zhang PZ, Wei D B, Zhou P, Zhang Y, Chen XH, Wang Q and Wang R N Rare Met. Mater. Eng. 43 707 http://rmme.ijournal.cn/rmme/ch/reader/view_abstract.aspx?file_no=20140340&flag=12014
[10] Ren B, Miao Q, Liang W P, Wang L, Xia J J and Liu W Corros. Sci. Prot. 27 363 https://www.cspt.org.cn/CN/10.11903/1002.6495.2015.1002015
[11] Braun R, Fröhlich M and Leyens C Int. J. Mater. Res. 101 637 DOI: 10.3139/146.1103222010
[12] Kim D J, Seo D Y, Huang X, Yang Q and Kim Y W Surf. Coat. Technol. 206 3048 DOI: 10.1016/j.surfcoat.2011.12.0042012
[13] Chen R R, Gong X, Wang Y, Qin G, Zhang N N, Su Y Q, Ding H S, Guo J J and Fu H Z Corros. Sci. 136 244 DOI: 10.1016/j.corsci.2018.03.0082018
[14] Yao J Q, He Y D, Wang D R and Lin J P Corros. Sci. 80 9 DOI: 10.1016/j.corsci.2013.08.0292014
[15] Yang X, Jiang Z P, Hao G J, Liang Y F, Dong X F and Lin J P Appl. Surf. Sci. 455 144 DOI: 10.1016/j.apsusc.2018.05.0322018
[16] Anghel E M, Marcu M, Banu A, Atkinson I, Paraschiv A and Petrescu S Ceram. Int. 42 12148 DOI: 10.1016/j.ceramint.2016.04.1482016
[17] Xu Z, Liu X, Zhang P, Zhang Y, Zhang G and He Z Surf. Coat. Technol. 201 4822 DOI: 10.1016/j.surfcoat.2006.07.1872007
[18] Xu Z and Xiong Frank F Plasma surface metallurgy with double glow discharge technology-Xe-tec process (Beijing: Science Press) DOI: 10.1007/978-981-10-5724-32017
[19] Wei D B, Chen X H, Zhang P Z, Ding F, Li F K and Yao Z J Appl. Surf. Sci. 441 448 DOI: 10.1016/j.apsusc.2018.02.0582018
[20] Zhang X, Xie X S, Yang Z M, Dong J X, Xu Z, Gao Y and Zhang T H Surf. Coat. Tech. 131 378 DOI: 10.1016/S0257-8972(00)00818-52000
[21] Qin L, Yang K K, Liu C S and Tang B Mater. Lett. 82 127 DOI: 10.1016/j.matlet.2012.05.0692012
[22] Wei D B, Zhang P Z, Yao Z J, Liang W P, Miao Q and Xu Z Corros. Sci. 66 43 DOI: 10.1016/j.corsci.2012.08.0632013
[23] Wei D B, Zhang P Z, Yao Z J, Zhou J T, Wei X F and Zhou P Appl. Surf. Sci. 261 800 DOI: 10.1016/j.apsusc.2012.08.1022012
[24] Chen X H, Zhang P Z, Wei D B, Ding F, Li F K, Wei X F and Ma S J Mater. Lett. 215 292 DOI: 10.1016/j.matlet.2017.12.1042018
[25] Paul A, Lauril T, Vuorinen V and Divinski S V Thermodynamics, Diffusion and the Kirkendall Effect in Solids(Springer Cham) https://link.springer.com/book/10.1007/978-3-319-07461-02014
[26] Zhao L L2010 The high temperature oxidation behavior of high Nb containing TiAl alloys and effects of alloying elements (Beijing: University of Science and Technology Beijing)
[27] Li XJ, Cheng G A, Xue W B and Cheng Y J2007 J. Aero. Mater. 27 1
[28] Wang D R2012 Proceedings of the 9th National Surface Engineering Conference and the 4th National Youth Surface Engineering Forum
[29] Li M S2001 High temperature oxidation of metals (Beijing: Metallurgical Industry Press)
[30] Tsai S C, Huntz A M and Dolin C Mater. Sci. Eng. A 212 6 DOI: 10.1016/0921-5093(96)10173-81996

Anti-oxidation characteristics of Cr-coating on surface of Ti-45Al-8.5Nb alloy by plasma surface metallurgy technique

RichHTML

PDF (PC)

赞

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

Metrics

本文评价

推荐阅读 0

[1]	Mei Qiao(乔梅), Tie-Jun Wang(王铁军), Yong Liu(刘泳), Tao Liu(刘涛), Shan Liu(刘珊), and Shi-Cai Xu(许士才). Surface structure modification of ReSe₂ nanosheets via carbon ion irradiation[J]. 中国物理B, 2023, 32(2): 26101-026101.
[2]	Yao-Pu Lang(郎垚璞), Qing-Gang Liu(刘庆纲), Qi Wang(王奇), Xing-Lin Zhou(周兴林), and Guang-Yi Jia(贾光一). Method of measuring one-dimensional photonic crystal period-structure-film thickness based on Bloch surface wave enhanced Goos-Hänchen shift[J]. 中国物理B, 2023, 32(1): 17802-017802.
[3]	Min Huang(黄敏), Yan-Song Liu(刘艳松), Zhi-Bing He(何智兵), and Yong Yi(易勇). Structure, phase evolution and properties of Ta films deposited using hybrid high-power pulsed and DC magnetron co-sputtering[J]. 中国物理B, 2022, 31(6): 66101-066101.
[4]	. [J]. 中国物理B, 2021, 30(3): 38106-.
[5]	. [J]. 中国物理B, 2021, 30(1): 16101-.
[6]	丁玮, 王小婷, 易阳旸. Development of “Parameter space screening”-based single-wavelength anomalous diffraction phasing and structure determination pipeline[J]. 中国物理B, 2019, 28(11): 116101-116101.
[7]	申华海, 向霞, 张海斌, 周晓松, 邓洪祥, 祖小涛. Effects of helium irradiation dose and temperature on the damage evolution of Ti₃SiC₂ ceramic[J]. 中国物理B, 2019, 28(7): 76104-076104.
[8]	韩普, 古元新, 丁玮, 范海福. Enhancement of MAD/MIR phasing at low resolution and a new procedure for automatic phase extension[J]. 中国物理B, 2019, 28(7): 76108-076108.
[9]	肖夏, 孔涛, 戚海洋, 秦慧全. Nondestructive determination of film thickness with laser-induced surface acoustic waves[J]. 中国物理B, 2018, 27(9): 96802-096802.
[10]	杜萌, 曹兴忠, 夏锐, 周忠坡, 靳硕学, 王宝义. Magnetic field aligned orderly arrangement of Fe₃O₄ nanoparticles in CS/PVA/Fe₃O₄ membranes[J]. 中国物理B, 2018, 27(2): 27805-027805.
[11]	况鹏, 韩小龙, 曹兴忠, 夏锐, 张鹏, 王宝义. Tunable monoenergy positron annihilation spectroscopy of polyethylene glycol thin films[J]. 中国物理B, 2017, 26(5): 57802-057802.
[12]	李天天, 杨铁, 方家, 张德坤, 孙建, 魏长春, 许盛之, 王广才, 刘彩池, 赵颖, 张晓丹. Microstructure and lateral conductivity control of hydrogenated nanocrystalline silicon oxide and its application in a-Si:H/a-SiGe:H tandem solar cells[J]. 中国物理B, 2016, 25(4): 46101-046101.
[13]	索鎏敏, 方铮, 胡勇胜, 陈立泉. FT-Raman spectroscopy study of solvent-in-salt electrolytes[J]. 中国物理B, 2016, 25(1): 16101-016101.
[14]	宋振, 刘小浪, 何丽珠, 夏志国, 刘泉林. Complementary method to locate atomic coordinates by combined searching method of structure-sensitive indexes based on bond valence method[J]. 中国物理B, 2015, 24(10): 106101-106101.
[15]	刘伟, 万竟平, 蔡吴鹏, 梁建华, 周晓松, 龙兴贵. Characterization of zirconium thin films deposited by pulsed laser deposition[J]. , 2014, 23(9): 98103-098103.