Chin. Phys. B ›› 2012, Vol. 21 ›› Issue (12): 124206-124206.doi: 10.1088/1674-1056/21/12/124206

• ELECTROMAGNETISM, OPTICS, ACOUSTICS, HEAT TRANSFER, CLASSICAL MECHANICS, AND FLUID DYNAMICS • 上一篇    下一篇

Polarization properties in prism laser gyro with mechanical dither bias

姚呈康, 曾晓东, 曹长庆   

  1. School of Technical Physics, Xidian University, Xi'an 710071, China
  • 收稿日期:2012-07-03 修回日期:2012-08-03 出版日期:2012-11-01 发布日期:2012-11-01
  • 基金资助:
    Project supported by the National High Technology Research and Development Program of China (Grant No. 2006AA12Z144).

Polarization properties in prism laser gyro with mechanical dither bias

Yao Cheng-Kang (姚呈康), Zeng Xiao-Dong (曾晓东), Cao Chang-Qing (曹长庆)   

  1. School of Technical Physics, Xidian University, Xi'an 710071, China
  • Received:2012-07-03 Revised:2012-08-03 Online:2012-11-01 Published:2012-11-01
  • Contact: Yao Cheng-Kang E-mail:yaochengkang@126.com
  • Supported by:
    Project supported by the National High Technology Research and Development Program of China (Grant No. 2006AA12Z144).

PDF (PC)

1169

赞

摘要： Specially for the phenomenon that amplitude of output voltage signal is modulated by dither bias in the laser gyros consisting of totally reflecting prisms, theoretical analysis and experimental research on the polarization properties of output light in gyro are carried out. Taking the effect of stress birefringence of prism into account, analytical formula of output light intensity in gyro and the relationship between polarization parameter and the amplitude modulation of the output signal are obtained and discussed. For the first time, the polarized power value of output light is adopted as a basis to estimate the output signal amplitude fading extent of laser gyros. Experimental results demonstrate that when the value of polarized power of output light is below 25.5% of that in ideal static case, the standard error is over 0.0337 dBm, and the displacement extent of prism is higher than 53% of radius of the beam waist in gyro cavity, the amplitude modulation extent of gyro output signal can reach up to 16%, which badly influences measurement accuracy of laser gyro. Using this polarized power detecting measurement method can make gyro repaired in its fabricating process immediately, improve the testing and producing efficiency and shorten the product development cycle.

关键词: prisms laser gyro, mechanical dither, stress induced birefringence, polarized detection

Abstract: Specially for the phenomenon that amplitude of output voltage signal is modulated by dither bias in the laser gyros consisting of totally reflecting prisms, theoretical analysis and experimental research on the polarization properties of output light in gyro are carried out. Taking the effect of stress birefringence of prism into account, analytical formula of output light intensity in gyro and the relationship between polarization parameter and the amplitude modulation of the output signal are obtained and discussed. For the first time, the polarized power value of output light is adopted as a basis to estimate the output signal amplitude fading extent of laser gyros. Experimental results demonstrate that when the value of polarized power of output light is below 25.5% of that in ideal static case, the standard error is over 0.0337 dBm, and the displacement extent of prism is higher than 53% of radius of the beam waist in gyro cavity, the amplitude modulation extent of gyro output signal can reach up to 16%, which badly influences measurement accuracy of laser gyro. Using this polarized power detecting measurement method can make gyro repaired in its fabricating process immediately, improve the testing and producing efficiency and shorten the product development cycle.

Key words: prisms laser gyro, mechanical dither, stress induced birefringence, polarized detection

中图分类号:  (Sensors, gyros)

  • 42.81.Pa
46.40.-f (Vibrations and mechanical waves) 42.81.Gs (Birefringence, polarization) 42.50.Tx (Optical angular momentum and its quantum aspects)