中国物理B ›› 2009, Vol. 18 ›› Issue (1): 174-178.doi: 10.1088/1674-1056/18/1/027

• • 上一篇    下一篇

The research of high-directive anisotropic magnetic metamaterial antenna loaded with frequency-selective surface

孙永志, 冉立新, 彭亮, 王伟光, 李庭, 赵旭, 陈秋林   

  1. No.8511 Research Institute of China, Aerospace Science Industry Corp., Nanjing 210007, China
  • 收稿日期:2008-01-10 修回日期:2008-06-07 出版日期:2009-01-20 发布日期:2009-01-20
  • 基金资助:
    Project supported by the National Natural Science Foundation of China (Grant No 60371010).

The research of high-directive anisotropic magnetic metamaterial antenna loaded with frequency-selective surface

Sun Yong-Zhi(孙永志)†, Ran Li-Xin(冉立新), Peng Liang(彭亮), Wang Wei-Guang(王伟光), Li Ting(李庭), Zhao Xu(赵旭), and Chen Qiu-Lin(陈秋林)   

  1. No.8511 Research Institute of China, Aerospace Science Industry Corp., Nanjing 210007, China
  • Received:2008-01-10 Revised:2008-06-07 Online:2009-01-20 Published:2009-01-20
  • Supported by:
    Project supported by the National Natural Science Foundation of China (Grant No 60371010).

PDF (PC)

1713

赞

摘要： This paper uses a Computer Simulation Technology microwave studio to simulate the performance of a new high-directivity anisotropic magnetic metamaterial antenna loaded with a frequency-selective surface. Frequency-selective surface with cross-dipole element has a great effect on the directivity, radiation pattern, and gain of such an antenna. The experimental results show that frequency-selective surface (FSS) significantly improve the radiation performance of anisotropic magnetic metamaterial antenna. For example, as a single anisotropic magnetic metamaterial antenna, half power beam width is 4 degrees in the H planes, and the gain of this antenna is 19.5 dBi at 10 GHz, achieving a 2.1 degree increment in half power beam width, and a 7.3 dB gain increment by loading with the FSS reflector. The simulating results are consistent with our experimental results.

关键词: anisotropic magnetic metamaterial, high-directivity antenna, frequency-selective surface

Abstract: This paper uses a Computer Simulation Technology microwave studio to simulate the performance of a new high-directivity anisotropic magnetic metamaterial antenna loaded with a frequency-selective surface. Frequency-selective surface with cross-dipole element has a great effect on the directivity, radiation pattern, and gain of such an antenna. The experimental results show that frequency-selective surface (FSS) significantly improve the radiation performance of anisotropic magnetic metamaterial antenna. For example, as a single anisotropic magnetic metamaterial antenna, half power beam width is 4 degrees in the H planes, and the gain of this antenna is 19.5 dBi at 10 GHz, achieving a 2.1 degree increment in half power beam width, and a 7.3 dB gain increment by loading with the FSS reflector. The simulating results are consistent with our experimental results.

Key words: anisotropic magnetic metamaterial, high-directivity antenna, frequency-selective surface

中图分类号:  (Antennas: theory, components and accessories)

  • 84.40.Ba
42.70.-a (Optical materials)