中国物理B ›› 2020, Vol. 29 ›› Issue (9): 95203-095203.doi: 10.1088/1674-1056/ab9436
Xiao-Yan Sun(孙晓艳), Yu-Ru Zhang(张钰如), Sen Chai(柴森), You-Nian Wang(王友年), Yan-Yan Chu(楚艳艳), Jian-Xin He(何建新)
Xiao-Yan Sun(孙晓艳)1, Yu-Ru Zhang(张钰如)2, Sen Chai(柴森)3, You-Nian Wang(王友年)2, Yan-Yan Chu(楚艳艳)1, Jian-Xin He(何建新)1
摘要: A fluid model is employed to investigate the effect of radio frequency bias on the behavior of an argon inductively coupled plasma (ICP). In particular, the effects of ICP source power, single-frequency bias power, and dual-frequency bias power on the characteristics of ICP are simulated at a fixed pressure of 30 mTorr (1 Torr=1.33322×102 Pa). When the bias frequency is fixed at 27.12 MHz, the two-dimensional (2D) plasma density profile is significantly affected by the bias power at low ICP source power (e.g., 50 W), whereas it is weakly affected by the bias power at higher ICP source power (e.g., 100 W). When dual-frequency (27.12 MHz/2.26 MHz) bias is applied and the sum of bias powers is fixed at 500 W, a pronounced increase in the maximum argon ion density is observed with the increase of the bias power ratio in the absence of ICP source power. As the ratio of 27.12-MHz/2.26-MHz bias power decreases from 500 W/0 W to 0 W/500 W with the ICP source power fixed at 50 W, the plasma density profiles smoothly shifts from edge-high to center-high, and the effect of bias power on the plasma distribution becomes weaker with the bias power ratio decreasing. Besides, the axial ion flux at the substrate surface is characterized by a maximum at the edge of the substrate. When the ICP source power is higher, the 2D plasma density profiles, as well as the spatiotemporal and radial distributions of ion flux at the substrate surface are characterized by a peak in the reactor center, and the distributions of plasma parameters are negligibly affected by the dual-frequency bias power ratio.
中图分类号: (Plasma simulation)