Motion of a rigid particle in the lid-driven cavity flow

doi:10.1088/1674-1056/ada438

中国物理B ›› 2025, Vol. 34 ›› Issue (3): 34701-034701.doi: 10.1088/1674-1056/ada438

Motion of a rigid particle in the lid-driven cavity flow

Fan Yang(杨帆)^1,2,†, Zhe Yan(闫喆)¹, Wencan Wang(汪文灿)¹, and Ren Shi(施任)¹

1 School of Energy and Power Engineering, University of Shanghai for Science and Technology, Shanghai 200093, China;
2 Shanghai Key Laboratory of Multiphase Flow and Heat Transfer in Power Engineering, Shanghai 200093, China

收稿日期:2024-11-01 修回日期:2024-12-07 接受日期:2024-12-31 发布日期:2025-03-15
通讯作者: Fan Yang E-mail:usstyf@126.com

Motion of a rigid particle in the lid-driven cavity flow

Fan Yang(杨帆)^1,2,†, Zhe Yan(闫喆)¹, Wencan Wang(汪文灿)¹, and Ren Shi(施任)¹

1 School of Energy and Power Engineering, University of Shanghai for Science and Technology, Shanghai 200093, China;
2 Shanghai Key Laboratory of Multiphase Flow and Heat Transfer in Power Engineering, Shanghai 200093, China

Received:2024-11-01 Revised:2024-12-07 Accepted:2024-12-31 Published:2025-03-15
Contact: Fan Yang E-mail:usstyf@126.com

摘要/Abstract

摘要： The motion of an elliptical rigid particle in a lid-driven cavity flow was numerically simulated using the immersed boundary lattice Boltzmann method (IB-LBM). The effects of the particle's initial orientation angle, initial position, aspect ratio, and size on the motion characteristics were investigated. The computational results indicate that the particle's motion undergoes two distinct stages: a starting stage that involves moving from the release position to a limit cycle, and a periodic stage that involves moving on the limit cycle. The initial orientation of the particle has a minimal impact on both stages of motion. In contrast, the time it takes for the particle to reach the limit cycle may vary depending on the release position. Furthermore, particles with a larger aspect ratio exhibit a greater maximum velocity magnitude; an increase in particle size causes the particle trajectory to contract more toward the center of the cavity, decreasing the centrifugal force experienced by the particle.

关键词: lattice Boltzmann methods, immersed boundary method, elliptical rigid particle, lid-driven cavity flow

Abstract: The motion of an elliptical rigid particle in a lid-driven cavity flow was numerically simulated using the immersed boundary lattice Boltzmann method (IB-LBM). The effects of the particle's initial orientation angle, initial position, aspect ratio, and size on the motion characteristics were investigated. The computational results indicate that the particle's motion undergoes two distinct stages: a starting stage that involves moving from the release position to a limit cycle, and a periodic stage that involves moving on the limit cycle. The initial orientation of the particle has a minimal impact on both stages of motion. In contrast, the time it takes for the particle to reach the limit cycle may vary depending on the release position. Furthermore, particles with a larger aspect ratio exhibit a greater maximum velocity magnitude; an increase in particle size causes the particle trajectory to contract more toward the center of the cavity, decreasing the centrifugal force experienced by the particle.

Key words: lattice Boltzmann methods, immersed boundary method, elliptical rigid particle, lid-driven cavity flow

中图分类号: (Lattice gas)

47.11.Qr

47.61.Jd (Multiphase flows) 47.55.Kf (Particle-laden flows)

Fan Yang(杨帆), Zhe Yan(闫喆), Wencan Wang(汪文灿), and Ren Shi(施任). Motion of a rigid particle in the lid-driven cavity flow[J]. 中国物理B, 2025, 34(3): 34701-034701.

Fan Yang(杨帆), Zhe Yan(闫喆), Wencan Wang(汪文灿), and Ren Shi(施任). Motion of a rigid particle in the lid-driven cavity flow[J]. Chin. Phys. B, 2025, 34(3): 34701-034701.

参考文献

[1] Krüger T, Holmes D and Coveney P V 2014 Biomicrofluidics 8 054114
[2] Haddadi H, Naghsh-Nilchi H and Carlo D D 2018 Biomicrofluidics 12 014112
[3] Whitesides G M 2006 Nature 442 368
[4] You Z, Badalyan A, Yang Y, Bedrikovetsky P and Hand M 2019 Geothermics 77 344
[5] Kosinski P, Kosinska A and Hoffmann A C 2009 Powder Technol. 191 327
[6] Sidiq C A N and Attarzadeh N R M 2012 Int. J. Eng. Sci. 51 90
[7] Xia Z H, Connington K W, Rapaka S, Yue P T, Feng J J and Chen S Y 2009 J. Fluid Mech. 625 249
[8] Huang H B, Yang X and Lu X Y 2014 Phys. Fluids 26 053302
[9] Qi D W and Luo L S 2003 J. Fluid Mech. 477 201
[10] Tsorng S J, Capart H, Lai J S and Young D L 2005 Exp. Fluids 40 314
[11] Puragliesi R, Dehbi A, Leriche E, Soldati A and Deville M O 2011 Int. J. Heat Fluid Flow 32 915
[12] Bayareh M, Nourbakhsh A, Rouzbahani F I and Jouzaei V 2019 SN Appl. Sci. 1 1040
[13] Yang F, Shao X S, Wang Y, Lu Y S and Cai X S 2021 Eur. J. Mech. B Fluids 86 90
[14] Sun G, Zhang J H, Hu J J, Zhang M X, Pan H and Ye X P 2022 Int. J. Mod. Phy. C 34 2350037
[15] Yang F, Dai M Y and Jin H 2024 Processes 12 813
[16] Yang F, Yang H C, Yan Y H, Guo X Y, Dai R and Liu C Q 2017 J. Mech. Sci. Technol. 31 3053
[17] Yang F, Jin H and Dai M Y 2024 Chin. Phys. B 33 064702
[18] Chen W Y, Yang F, Yan Y H, Guo X Y, Dai R and Cai X S 2018 J. Mech. Sci. Technol. 32 2637
[19] Hu J J, Sun D K, Mao S H, Wu H M, Yu S Y and Xu M S 2022 J. Comput. Theor. Transp. 51 222
[20] Hu J J 2020 Phys. Fluids 32 113304
[21] Zhang Y, Li C and Ye M 2023 Phys. Fluids 35 123305
[22] Wang L, Li Z T, Wu S, Tao S, Zhang K, Bi J L and Lu G 2023 J. Appl. Phys. 134 214701
[23] Ladd A J C 1994 J. Fluid Mech. 271 285
[24] Mei RW, Luo L S, Lallemand P and d’Humières D 2006 Comput. Fluids 35 855
[25] Inamuro T, Maeba K and Ogino F 2000 Int. J. Multiphase Flow 26 1981
[26] Romanõ F and Kuhlmann H C 2017 Theor. Comput. Fluid Dyn. 31 427
[27] Gan H, Chang J Z, Feng J J and Hu H H 2003 J. Fluid Mech. 481 385
[28] Yu Z, Shao X and Wachs A 2006 J. Comput. Phys. 217 424
[29] Feng Z G and Michaelides E E 2009 Int. J. Heat Mass Transfer 52 777
[30] Feng Z G and Michaelides E E 2008 Phys. Fluids 20 040604
[31] Peskin C S 2002 Acta Numer. 11 479
[32] Feng Z G and Michaelides E E 2005 J. Comput. Phys. 202 20
[33] Shin S J and Sung H J 2011 Phys. Rev. E 83 46321
[34] Sun D K, Jiang D, Xiang N, Chen K and Ni Z H 2013 Chin. Phys. Lett. 30 74702
[35] Chen Y L 2014 RSC Adv. 4 17908
[36] Kim B, Chang C B, Park S G and Sung H J 2015 Int. J. Heat Fluid Flow 54 87
[37] Mukundakrishnan K, Hu H H and Ayyaswamy P S 2008 J. Fluid Mech. 599 169
[38] Eshghinejadfard A and Thévenin D 2016 Int. J. Heat Fluid Flow 60 31
[39] Zhang H, Shao Y J, Li K X and Hu Y 2017 Powder Technol. 314 315
[40] Hu J J 2021 Eur. J. Mech. B Fluids 85 124
[41] Guo Z L and Zheng C G 2008 Int. J. Comput. Fluid D 22 465
[42] He X Y and Luo L S 1977 J. Stat. Phys. 88 927
[43] Lu J H, Han H F, Shi B C and Guo Z L 2012 Phys. Rev. E 85 016711
[44] Kang S K and Hassan Y A 2010 Int. J. Numer. Methods Fluids 66 1132
[45] Niu X D, Shu C, Chew Y T and Peng Y 2006 Phys. Lett. A 354 173
[46] Liu J, Huang C S, Chai Z H and Shi B C 2022 Comput. Fluids 233 105246

Motion of a rigid particle in the lid-driven cavity flow

Motion of a rigid particle in the lid-driven cavity flow

RichHTML

PDF (PC)

赞

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 4

Metrics

本文评价

推荐阅读 0

[1]	Fan Yang(杨帆), Hu Jin(金虎), and Mengyao Dai(戴梦瑶). On the spreading behavior of a droplet on a circular cylinder using the lattice Boltzmann method[J]. 中国物理B, 2024, 33(6): 64702-064702.
[2]	王涛, 刘铁钢, 王正. The second Hopf bifurcation in lid-driven square cavity[J]. 中国物理B, 2020, 29(3): 30503-030503.
[3]	柴振华, 施保昌, 郑　林. Simulating high Reynolds number flow in two-dimensional lid-driven cavity by multi-relaxation-time lattice Boltzmann method[J]. 中国物理B, 2006, 15(8): 1855-1863.
[4]	何南忠, 王能超, 施保昌, 郭照立. A unified incompressible lattice BGK model and its application to three-dimensional lid-driven cavity flow[J]. 中国物理B, 2004, 13(1): 40-46.