中国物理B ›› 2024, Vol. 33 ›› Issue (3): 36401-036401.doi: 10.1088/1674-1056/ad1823

• • 上一篇    下一篇

Effect of overheating-induced minor addition on Zr-based metallic glasses

Fu Yang(杨福)1,2, Zhenxing Bo(薄振兴)1,2, Yao Huang(黄瑶)1,2, Yutian Wang(王雨田)1,2, Boyang Sun(孙博阳)1,2, Zhen Lu(鲁振)1, Baoan Sun(孙保安)1,4, Yanhui Liu(柳延辉)1,2,3,†, Weihua Wang(汪卫华)1,3,4, and Mingxiang Pan(潘明祥)1,3,4,‡   

  1. 1 Institute of Physics, Chinese Academy of Sciences, Beijing 100190, China;
    2 Center of Materials Science and Optoelectronics Engineering, University of Chinese Academy of Sciences, Beijing 100049, China;
    3 School of Physical Sciences, University of Chinese Academy of Sciences, Beijing 100049, China;
    4 Songshan Lake Materials Laboratory, Dongguan 523808, China
  • 收稿日期:2023-11-30 修回日期:2023-12-20 接受日期:2023-12-22 出版日期:2024-02-22 发布日期:2024-02-22
  • 通讯作者: Yanhui Liu, Mingxiang Pan E-mail:yanhui.liu@iphy.ac.cn;panmx@iphy.ac.cn
  • 基金资助:
    The work was financially supported by the National Key Research and Development Program of China (Grant Nos. 2018YFA0703600, 2021YFA0716302, and 2021YFA0718703), the National Natural Science Foundation of China (Grant Nos. 51825104 and 52192602), and China Postdoctoral Science Foundation (Grant No. 2022T150691).

Effect of overheating-induced minor addition on Zr-based metallic glasses

Fu Yang(杨福)1,2, Zhenxing Bo(薄振兴)1,2, Yao Huang(黄瑶)1,2, Yutian Wang(王雨田)1,2, Boyang Sun(孙博阳)1,2, Zhen Lu(鲁振)1, Baoan Sun(孙保安)1,4, Yanhui Liu(柳延辉)1,2,3,†, Weihua Wang(汪卫华)1,3,4, and Mingxiang Pan(潘明祥)1,3,4,‡   

  1. 1 Institute of Physics, Chinese Academy of Sciences, Beijing 100190, China;
    2 Center of Materials Science and Optoelectronics Engineering, University of Chinese Academy of Sciences, Beijing 100049, China;
    3 School of Physical Sciences, University of Chinese Academy of Sciences, Beijing 100049, China;
    4 Songshan Lake Materials Laboratory, Dongguan 523808, China
  • Received:2023-11-30 Revised:2023-12-20 Accepted:2023-12-22 Online:2024-02-22 Published:2024-02-22
  • Contact: Yanhui Liu, Mingxiang Pan E-mail:yanhui.liu@iphy.ac.cn;panmx@iphy.ac.cn
  • Supported by:
    The work was financially supported by the National Key Research and Development Program of China (Grant Nos. 2018YFA0703600, 2021YFA0716302, and 2021YFA0718703), the National Natural Science Foundation of China (Grant Nos. 51825104 and 52192602), and China Postdoctoral Science Foundation (Grant No. 2022T150691).

RichHTML

0

PDF (PC)

92

赞

补充材料

1

摘要： Melt treatment is well known to have an important influence on the properties of metallic glasses (MGs). However, for the MGs quenched from different melt temperatures with a quartz tube, the underlying physical origin responsible for the variation of properties remains poorly understood. In the present work, we systematically studied the influence of melt treatment on the thermal properties of a Zr50Cu36Al14 glass-forming alloy and unveiled the microscopic origins. Specifically, we quenched the melt at different temperatures ranging from 1.1Tl to 1.5Tl (Tl is the liquidus temperature) to obtain melt-spun MG ribbons and investigated the variation of thermal properties of the MGs upon heating. We found that glass transition temperature, Tg, increases by as much as 36 K, and the supercooled liquid region disappears in the curve of differential scanning calorimetry when the melt is quenched at a high temperature up to 1.5Tl. The careful chemical analyses indicate that the change in glass transition behavior originates from the incorporation of oxygen and silicon in the molten alloys. The incorporated oxygen and silicon can both enhance the interactions between atoms, which renders the cooperative rearrangements of atoms difficult, and thus enhances the kinetic stability of the MGs.

关键词: metallic glass, thermal properties, melt treatment, overheating, oxygen content

Abstract: Melt treatment is well known to have an important influence on the properties of metallic glasses (MGs). However, for the MGs quenched from different melt temperatures with a quartz tube, the underlying physical origin responsible for the variation of properties remains poorly understood. In the present work, we systematically studied the influence of melt treatment on the thermal properties of a Zr50Cu36Al14 glass-forming alloy and unveiled the microscopic origins. Specifically, we quenched the melt at different temperatures ranging from 1.1Tl to 1.5Tl (Tl is the liquidus temperature) to obtain melt-spun MG ribbons and investigated the variation of thermal properties of the MGs upon heating. We found that glass transition temperature, Tg, increases by as much as 36 K, and the supercooled liquid region disappears in the curve of differential scanning calorimetry when the melt is quenched at a high temperature up to 1.5Tl. The careful chemical analyses indicate that the change in glass transition behavior originates from the incorporation of oxygen and silicon in the molten alloys. The incorporated oxygen and silicon can both enhance the interactions between atoms, which renders the cooperative rearrangements of atoms difficult, and thus enhances the kinetic stability of the MGs.

Key words: metallic glass, thermal properties, melt treatment, overheating, oxygen content

中图分类号:  (Metallic glasses)

  • 64.70.pe
63.50.Lm (Glasses and amorphous solids) 65.60.+a (Thermal properties of amorphous solids and glasses: heat capacity, thermal expansion, etc.) 81.05.Kf (Glasses (including metallic glasses))