关键词: molybdenum nanostructured fuzz, pulsed-H plasma, edge localized mode, etching process

Abstract: Steady high-flux helium (He) plasma with energy ranging from 50 eV to 90 eV is used to fabricate a fiber-form nanostructure called fuzz on a polycrystalline molybdenum (Mo) surface. Enhanced hydrogen (H) pulsed plasma in a wide power density range of 12 MW/m²-35 MW/m² is subsequently used to bombard the fuzzy Mo, thereby simulating the damage of edge localized mode (ELM) to fuzz. The comparisons of surface morphologies, crystalline structures, and optical reflectivity between the original Mo and the Mo treated with various He⁺ energy and transient power densities are performed. With the increase of He ion energy, the Mo nano-fuzz evolved density is enlarged due to the decrease of filament diameter and optical reflectivity. The fuzz-enhanced He release should be the consequence of crystalline growth and the lattice shrinkage inside the Mo-irradiated layers (~200 nm). The fuzz induced by lower energy experiences more severe melting damage and dust release under the condition of the identical transient H plasma-bombardment. The H and He are less likely to be trapped due to aggravated melting evidenced by the enhanced crystalline size and distinct lattice shrinkage. As the transient power density rises, the thermal effect is enhanced, thereby causing the fuzz melting loss to aggravate and finally to completely disappear when the power density exceeds 21 MW/m². Irreversible grain expansion results in huge tensile stress, leading to the observable brittle cracking. The effects of transient thermal load and He ion energy play a crucial role in etching Mo fuzz during ELM transient events.

Key words: molybdenum nanostructured fuzz, pulsed-H plasma, edge localized mode, etching process