中国物理B ›› 2016, Vol. 25 ›› Issue (8): 88401-088401.doi: 10.1088/1674-1056/25/8/088401

• INTERDISCIPLINARY PHYSICS AND RELATED AREAS OF SCIENCE AND TECHNOLOGY • 上一篇    下一篇

Metallic spherical anechoic chamber for antenna pattern measurement

Ali Farahbakhsh, Mohammad Khalaj-Amirhosseini   

  1. The Electrical Engineering Department, Iran University of Science and Technology, Tehran, Iran
  • 收稿日期:2015-12-20 修回日期:2016-04-21 出版日期:2016-08-05 发布日期:2016-08-05
  • 通讯作者: Ali Farahbakhsh E-mail:a_farahbakhsh@iust.ac.ir

Metallic spherical anechoic chamber for antenna pattern measurement

Ali Farahbakhsh, Mohammad Khalaj-Amirhosseini   

  1. The Electrical Engineering Department, Iran University of Science and Technology, Tehran, Iran
  • Received:2015-12-20 Revised:2016-04-21 Online:2016-08-05 Published:2016-08-05
  • Contact: Ali Farahbakhsh E-mail:a_farahbakhsh@iust.ac.ir

摘要: Anechoic chambers are used for indoor antenna measurements. The common method of constructing an anechoic chamber is to cover all inside walls by the electromagnetic absorbers. In this paper, a fully metallic spherical chamber structure is presented in which the propagation of the electromagnetic waves inside the chamber is controlled and they are guided to an absorber. In the proposed method, an appropriate quiet zone is obtained, and unlike ordinary anechoic chambers, the absorber usage amount is reduced greatly. The performance of the chamber is evaluated by simulation. The results show that the proposed method could provide a useful technique for the indoor antenna measurements.

关键词: absorber usage reduction, anechoic chamber, antenna measurements, metallic spherical chamber

Abstract: Anechoic chambers are used for indoor antenna measurements. The common method of constructing an anechoic chamber is to cover all inside walls by the electromagnetic absorbers. In this paper, a fully metallic spherical chamber structure is presented in which the propagation of the electromagnetic waves inside the chamber is controlled and they are guided to an absorber. In the proposed method, an appropriate quiet zone is obtained, and unlike ordinary anechoic chambers, the absorber usage amount is reduced greatly. The performance of the chamber is evaluated by simulation. The results show that the proposed method could provide a useful technique for the indoor antenna measurements.

Key words: absorber usage reduction, anechoic chamber, antenna measurements, metallic spherical chamber

中图分类号:  (Antennas: theory, components and accessories)

  • 84.40.Ba
84.40.-x (Radiowave and microwave (including millimeter wave) technology) 41.20.Jb (Electromagnetic wave propagation; radiowave propagation)