中国物理B ›› 2008, Vol. 17 ›› Issue (5): 1809-1816.doi: 10.1088/1674-1056/17/5/043

• CLASSICAL AREAS OF PHENOMENOLOGY • 上一篇    下一篇

Numerical simulation of end-pumped CW Nd3+:GdVO4 laser at 1063nm

祖宁宁, 孙桂娟, 戴振文   

  1. Department of Physics, Jilin University, Changchun 130023, China; Key Laboratory of Coherent Light, Atomic and Molecular Spectroscopy, Ministry of Education, Changchun 130023, China
  • 收稿日期:2007-08-18 修回日期:2007-09-17 出版日期:2008-05-20 发布日期:2008-05-20
  • 基金资助:
    Project supported by the National Natural Science Foundation of China (Grant No 10104009).

Numerical simulation of end-pumped CW Nd3+:GdVO4 laser at 1063nm

Zu Ning-Ning(祖宁宁), Sun Gui-Juan(孙桂娟), and Dai Zhen-Wen(戴振文)†   

  1. Department of Physics, Jilin University, Changchun 130023, China; Key Laboratory of Coherent Light, Atomic and Molecular Spectroscopy, Ministry of Education, Changchun 130023, China
  • Received:2007-08-18 Revised:2007-09-17 Online:2008-05-20 Published:2008-05-20
  • Supported by:
    Project supported by the National Natural Science Foundation of China (Grant No 10104009).

PDF (PC)

504

赞

摘要： A theoretical model to simulate an end-pumped CW Nd3+:GdVO4 laser at 1063nm is presented. Its essence is to use the propagation equations to demonstrate the spatial evolutions of the pump and the laser powers in the cavity, hence it is applicable to both low and high gain lasers. The simulation results obtained by this model are in good agreement with the experimental observations reported in the literature for a Ti:sapphire-pumped Nd3+:GdVO4 laser. Moreover, some parameters, such as the reflectivity of output coupler, the spot size of laser beam and the crystal length, are discussed with a view to optimizing the laser performance.

Abstract: A theoretical model to simulate an end-pumped CW Nd3+:GdVO4 laser at 1063nm is presented. Its essence is to use the propagation equations to demonstrate the spatial evolutions of the pump and the laser powers in the cavity, hence it is applicable to both low and high gain lasers. The simulation results obtained by this model are in good agreement with the experimental observations reported in the literature for a Ti:sapphire-pumped Nd3+:GdVO4 laser. Moreover, some parameters, such as the reflectivity of output coupler, the spot size of laser beam and the crystal length, are discussed with a view to optimizing the laser performance.

Key words: end-pumped, Nd3+:GdVO4, 1063nm laser

中图分类号:  (Doped-insulator lasers and other solid state lasers)

  • 42.55.Rz
42.70.Hj (Laser materials)