中国物理B ›› 2001, Vol. 10 ›› Issue (8): 725-729.doi: 10.1088/1009-1963/10/8/311

• • 上一篇    下一篇

PUMP-TUNING KTP OPTICAL PARAMETRIC OSCILLATOR WITH CONTINUOUS OUTPUT WAVELENGTH PUMPED BY A PULSED TUNABLE Ti:SAPPHIRE LASER

姚建铨1, 于意仲1, 丁欣2, 禹宣伊2, 许京军2, 张光寅2   

  1. (1)Optoelectronic Information Science and Technology Laboratory, Institute of Laser and Opto-Electronics, Tianjin University, Tianjin 300072, China; (2)Optoelectronic Information Science and Technology Laboratory, Photonic Center, Nankai University, Tianjin 300071, China
  • 收稿日期:2000-12-07 修回日期:2001-03-05 出版日期:2001-08-15 发布日期:2005-06-12
  • 基金资助:
    Project supported by the National Natural Science Foundation of China (Grant No. 6982108).

PUMP-TUNING KTP OPTICAL PARAMETRIC OSCILLATOR WITH CONTINUOUS OUTPUT WAVELENGTH PUMPED BY A PULSED TUNABLE Ti:SAPPHIRE LASER

Ding Xin (丁欣)a, Yao Jian-quan (姚建铨)b, Yu Yi-zhong (于意仲)b, Yu Xuan-yi (禹宣伊)a, Xu Jing-jun (许京军)a, Zhang Guang-yin (张光寅)a   

  1. a Optoelectronic Information Science and Technology Laboratory, Photonic Center, Nankai University, Tianjin 300071, China; b Optoelectronic Information Science and Technology Laboratory, Institute of Laser and Opto-Electronics, Tianjin University, Tianjin 300072, China
  • Received:2000-12-07 Revised:2001-03-05 Online:2001-08-15 Published:2005-06-12
  • Supported by:
    Project supported by the National Natural Science Foundation of China (Grant No. 6982108).

PDF (PC)

469

赞

摘要： We report on the implementation of a KTP optical parametric oscillator pumped by a pulsed tunable Ti:sapphire laser. Two major improvements were achieved, including the connection of the signal and idler tuning ranges and the high-output conversion efficiency through the signal and idler tuning ranges. Both in the signal and idler, the continuous output wavelength from 1.261 to 2.532μm was obtained by varying the pump wavelength from 0.7 to 0.98μm. The maximum output pulse energy was 27.2mJ and the maximum conversion efficiency was 35.7% at 1.311μm (signal).

Abstract: We report on the implementation of a KTP optical parametric oscillator pumped by a pulsed tunable Ti:sapphire laser. Two major improvements were achieved, including the connection of the signal and idler tuning ranges and the high-output conversion efficiency through the signal and idler tuning ranges. Both in the signal and idler, the continuous output wavelength from 1.261 to 2.532μm was obtained by varying the pump wavelength from 0.7 to 0.98μm. The maximum output pulse energy was 27.2mJ and the maximum conversion efficiency was 35.7% at 1.311μm (signal).

Key words: Ti:sapphire laser, pump-tuning, optical parametric oscillator, phase-matching condition

中图分类号:  (Optical parametric oscillators and amplifiers)

  • 42.65.Yj
42.60.Fc (Modulation, tuning, and mode locking) 42.55.Rz (Doped-insulator lasers and other solid state lasers) 42.60.By (Design of specific laser systems) 42.60.Jf (Beam characteristics: profile, intensity, and power; spatial pattern formation)