中国物理B ›› 1998, Vol. 7 ›› Issue (8): 583-588.doi: 10.1088/1004-423X/7/8/005

• CONDENSED MATTER: STRUCTURAL, MECHANICAL, AND THERMAL PROPERTIES • 上一篇    下一篇

MOLECULAR DYNAMICS SIMULATION ON LOW ANGLE GRAIN BOUNDARIES

李斌, 张修睦, 李依依   

  1. Institute of Metal Research, Academia Sinica, Shenyang 110015, China
  • 收稿日期:1998-03-06 出版日期:1998-08-20 发布日期:1998-08-20
  • 基金资助:
    Project supported by the National Natural Science Foundation of China.

MOLECULAR DYNAMICS SIMULATION ON LOW ANGLE GRAIN BOUNDARIES

Li Bin (李斌), Zhang Xiu-mu (张修睦), Li Yi-yi (李依依)   

  1. Institute of Metal Research, Academia Sinica, Shenyang 110015, China
  • Received:1998-03-06 Online:1998-08-20 Published:1998-08-20
  • Supported by:
    Project supported by the National Natural Science Foundation of China.

PDF (PC)

927

赞

摘要： Molecular dynamics simulation has been performed to investigate the microstructure and properties of low angle grain boundaries, employing the embedded atom method(EAM) type interatomic potential for Ni-Al alloy. The energies of the low angle grain boundaries with different dislocation densities were calculated, and the results indicate that the low angle grain boundary energy varies as a function of misorientation angle. The simulation was found in good agreement with the calculation on the basis of the dislocation theories in the low angle scale. The low angle grain boundary energy goes up with the increase of misorientation angle and tends to go down after reaching a maximum. An energy cusp exists when the misorientation angle increases further, but in this scale the dislocation theories are invalid for energy calculation due to the strong interaction of the dislocations at the boundaries. The simulation results also indicate that the microstructure of low angle grain boundaries can still be described as dislocations when the misorientation angle is larger than 10°.

Abstract: Molecular dynamics simulation has been performed to investigate the microstructure and properties of low angle grain boundaries, employing the embedded atom method(EAM) type interatomic potential for Ni-Al alloy. The energies of the low angle grain boundaries with different dislocation densities were calculated, and the results indicate that the low angle grain boundary energy varies as a function of misorientation angle. The simulation was found in good agreement with the calculation on the basis of the dislocation theories in the low angle scale. The low angle grain boundary energy goes up with the increase of misorientation angle and tends to go down after reaching a maximum. An energy cusp exists when the misorientation angle increases further, but in this scale the dislocation theories are invalid for energy calculation due to the strong interaction of the dislocations at the boundaries. The simulation results also indicate that the microstructure of low angle grain boundaries can still be described as dislocations when the misorientation angle is larger than 10°.

中图分类号:  (Grain and twin boundaries)

  • 61.72.Mm
61.72.Bb (Theories and models of crystal defects)