中国物理B ›› 2018, Vol. 27 ›› Issue (10): 107702-107702.doi: 10.1088/1674-1056/27/10/107702

• CONDENSED MATTER: ELECTRONIC STRUCTURE, ELECTRICAL, MAGNETIC, AND OPTICAL PROPERTIES • 上一篇    下一篇

Low-temperature green synthesis of boron carbide using aloe vera

H V SarithaDevi, M S Swapna, G Ambadas, S Sankararaman   

  1. 1 Department of Optoelectronics and Department of Nanoscience and Nanotechnology, University of Kerala, Kariavattom, Thiruvananthapuram-695581, Kerala, India;
    2 Government Victoria College, Palakkad, Kerala, India
  • 收稿日期:2018-06-07 修回日期:2018-07-15 出版日期:2018-10-05 发布日期:2018-10-05
  • 通讯作者: G Ambadas, S Sankararaman E-mail:ambadasg69@gmail.com;drssraman@gmail.com

Low-temperature green synthesis of boron carbide using aloe vera

H V SarithaDevi1, M S Swapna1, G Ambadas2, S Sankararaman1   

  1. 1 Department of Optoelectronics and Department of Nanoscience and Nanotechnology, University of Kerala, Kariavattom, Thiruvananthapuram-695581, Kerala, India;
    2 Government Victoria College, Palakkad, Kerala, India
  • Received:2018-06-07 Revised:2018-07-15 Online:2018-10-05 Published:2018-10-05
  • Contact: G Ambadas, S Sankararaman E-mail:ambadasg69@gmail.com;drssraman@gmail.com

摘要:

The unique structural and physical properties of boron carbide, which make it suitable for a wide range of applications, demands the development of low-cost and green synthesis method. In the present work, the commonly available leaves of aloe vera are hydrothermally treated to form the carbon precursor for the synthesis of boron carbide. The morphological characterization reveals the porous nature of the precursor turning into a tubular structure upon boron carbide formation. The structural characterization by x-ray diffraction and other spectroscopic techniques such as Fourier transform infrared, Raman, photoluminescence and uv-visible near-infrared spectroscopy confirm the formation of boron carbide. The thermogravimetric analysis of the sample is found to exhibit good thermal stability above 500℃. When the sample is annealed to 600℃, boron carbide with phase purity is obtained, which is confirmed through XRD and FTIR analyses. The optical emission properties of the sample are studied through CIE plot and power spectrum. Compared with other natural precursors for boron carbide, the aloe vera is found to give a good yield above 50%.

关键词: aloe vera, boric acid, boron carbide, hydrothermal method

Abstract:

The unique structural and physical properties of boron carbide, which make it suitable for a wide range of applications, demands the development of low-cost and green synthesis method. In the present work, the commonly available leaves of aloe vera are hydrothermally treated to form the carbon precursor for the synthesis of boron carbide. The morphological characterization reveals the porous nature of the precursor turning into a tubular structure upon boron carbide formation. The structural characterization by x-ray diffraction and other spectroscopic techniques such as Fourier transform infrared, Raman, photoluminescence and uv-visible near-infrared spectroscopy confirm the formation of boron carbide. The thermogravimetric analysis of the sample is found to exhibit good thermal stability above 500℃. When the sample is annealed to 600℃, boron carbide with phase purity is obtained, which is confirmed through XRD and FTIR analyses. The optical emission properties of the sample are studied through CIE plot and power spectrum. Compared with other natural precursors for boron carbide, the aloe vera is found to give a good yield above 50%.

Key words: aloe vera, boric acid, boron carbide, hydrothermal method

中图分类号:  (Elements, oxides, nitrides, borides, carbides, chalcogenides, etc.)

  • 77.84.Bw
81.05.Je (Ceramics and refractories (including borides, carbides, hydrides, nitrides, oxides, and silicides)) 81.05.Rm (Porous materials; granular materials) 81.05.U- (Carbon/carbon-based materials)