Low driving voltage in organic light-emitting diode using MoO₃/NPB multiple quantum well structure in hole transport layer

Driving voltage of organic light-emitting diode (OLED) is lowered by employing molybdenum trioxide (MoO₃)/N, N'-bis(naphthalene-1-yl)-N,N'-bis(phe-nyl)-benzidine (NPB) multiple quantum well (MQW) structure in hole transport layer. For the device with double quantum well (DQW) structure of ITO/ MoO₃ (2.5 nm)/NPB (20 nm)₂/Alq₃(50 nm)/LiF (0.8 nm)/Al (120 nm), the turn-on voltage is reduced to 2.8 V, which is lowered by 0.4 V compared with that of the control device (without MQW structures), the driving voltage is 5.6 V, which is reduced by 1 V compared with that of the control device at the 1000 cd/m². In this work, the enhancement of the injection and transport ability for holes could reduce the driving voltage for the device with MQW structure, which is attributed not only to the reducing energy barrier between ITO and NPB, but also to the forming charge transfer complex between MoO₃ and NPB induced by the interfacial doping effect of MoO₃.