Review of relaxation oscillations in plasma processing discharges

Relaxation oscillations due to plasma instabilities at frequencies ranging from a few Hz to tens of kHz have been observed in various types of plasma processing discharges. Relaxation oscillations have been observed in electropositive capacitive discharges between a powered anode and a metallic chamber whose periphery is grounded through a slot with dielectric spacers. The oscillations of time-varying optical emission from the main discharge chamber show, for example, a high-frequency (\sim 40 kHz) relaxation oscillation at 13.33Pa, with an absorbed power being nearly the peripheral breakdown power, and a low-frequency (\sim 3 Hz) oscillation, with an even higher absorbed power. The high-frequency oscillation is found to ignite plasma in the slot, but usually not in the peripheral chamber. The kilohertz oscillations are modelled using an electromagnetic model of the slot impedance, coupled to a circuit analysis of the system including the matching network. The model results are in general agreement with the experimental observations, and indicate a variety of behaviours dependent on the matching conditions. In low-pressure inductive discharges, oscillations appear in the transition between low-density capacitively driven and high-density inductively driven discharges when attaching gases such as SF₆ and Ar/SF₆ mixtures are used. Oscillations of charged particles, plasma potential, and light, at frequencies ranging from a few Hz to tens of kHz, are seen for gas pressures between 0.133 Pa and 13.33 Pa and discharge powers in a range of 75--1200 W. The region of instability increases as the plasma becomes more electronegative, and the frequency of plasma oscillation increases as the power, pressure, and gas flow rate increase. A volume-averaged (global) model of the kilohertz instability has been developed; the results obtained from the model agree well with the experimental observations.